84 models
A slim tray to store the discarded tiles. Refilling the bag has never been easier! Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You can also send me a tip on…
This overlay for Azul's player board keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers and one…
Could not find a overlay to fit my printer. (Or that fitted properly) This overlay is 233mm x 233mm (Prints perfect on Creality CR-6 SE) There are 4 clips. The overlays fit inside the box. Print Settings Printer Brand: Creality Rafts: No…
To prevent the tiles in Azul Mini from falling out of the included bag, I've designed a container with a lid that doubles as a board for the factories. This replaces the cheap feeling included insert for the factory. No supports required.
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
The source marked this model as adult content.
An Azul factory with hinged constrainers for flipping tiles into the central pile. Cups need to be printed with supports. The cardboard discs that come with the boardgame should fit inside snuggly.
A slim tray to store the discarded tiles. Refilling the bag has never been easier! I wasn't a fan of the original tab used to pick up the tray, so I redesigned it from scratch and added a finger hole to make removing it from the box…
Hairpiece worn by Princess Azula and Prince Zuko. In S2 Princess Azula is seen wearing a red hairpiece with a gold strap. In other parts of the series, both the royal siblings are seen with gold hair pieces held in place with a red band…
I hated the flimsy azul mini playing tray and thought the center ‘floor’ space was a bit small. Made this to make it even more portable with a bigger floor space. I'd love to make it modular enough so you could easily set it up for 5/7/9…
These are factory organizers that are used while playing Azul. They look nice and keep the tiles in their proper place. The split version can be stored in the game box. For nine Factory rings, you'll get perfect angles between the…
This is the head piece of Azula from Avatar: The Last Airbender It is made to be used directly on the hair/wig. Model is already oriented to be printed as is. Feel free to visit our website/instagram for more cosplay props 3D models and…
This is a box organizer for Azul Mini edition. Holds all tiles at the bottom, the players mats and rulebook. There is also a piece that substitute the plastic “fabric tray”; it attaches to the lid with magnets, so you could use it to play…
This was made as a gift for my brother who plays Azul. It sits on top of a standard Azul board and aligns the tiles to make it more satisfying, and so I spend less time fidgeting with the alignment of the tiles. Made in Fusion 360. I…
I really liked Jacques Botha's Azul overlay , but I didn't want to glue clips to my overlay. I have a large format printer so I had plenty of room to make an overlay that fit over the entire board. The overlay is 242mm x 242mm so it…
This is an insert / organizer for Azul with the Crystal Mosaic player boards, the Special Factories promo, and the Joker Tiles promo. It has no lid lift, supports vertical storage, and was designed to aid setup and teardown. I was not in…
This is a remix of my Azul overlay, but for a laser cutter instead. It uses the same 3D printed pawn as the original, and 2 new small identical 3D printed clips to fasten it to the board. The clips are sized for 3mm plywood and 2.25mm…
I was tired of the bricks sliding if someone hit the table or the game board by mistake, so I wanted an overlay to hold the bricks. None of the others I found suited my needs, so I created my own. They can be used individually or 3 all…
Do you want to play Azul while traveling, but find the original box too big? Let me introduce a travel-friendly, custom-made version, packaged in a compact 22 x 17 x 4 cm box. How to Print Print without supports. All color changes can be…
Azul the board game (complete). There is a printed board, pieces and coasters. Everything in the original game is here in a remixed form.
Easy print, makes playing so much more fun! For the small box, I used 6x3mm magnets. While I designed, I did get inspiration from: Azul Factory with hinged containers by Vice | Download free STL model | Printables.com Azul Factory…
his is a remix of guiosca's simple gameboard overlay which I found excellent for its simplicity, speed of printing, and ability to print on a smaller format print bed. The changes are small. I increased the thickness 0.3mm to provide a…
In the land of Prusa, everything gets hexed, including game insert bottoms.
This is an overlay for Azul's player board that keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers…
First of all, thanks to jacquesuk for creating this overlay, it looks and works great! This is a remix of the original design fitting a smaller build surface than 233x233mm. This is achieved by splitting the piece and adding dovetail…
Overlay for the Azul : Master Chocolatier board game. I could not find an overlay that fit the slightly different location of the chits. The pictures are printed with Polyterra Earth Brown on a PEO sheet at Bambu Labs X1C standard 0.2mm…
A simple hairpiece that Princess Azula wears in the show Avatar The Last Air Bender. This allows for different-sized hairbands to be printed out and used to fit your ponytail's size. Make sure to sand, paint, and then glue the pieces…
To print this part, I sliced it in two pieces and used the new connector-feature in Prusa Slicer to create dowel-type connectors as well as the required holes in both parts. Fits pretty well.
I wanted to print the original version, but it was too large for my Prusa MINI. I decided to create a square version of it. I removed the lip because with the smaller size it is not needed to get the tray out. I printed it with Prusament…
These are factory organizers that are used while playing Azul. They look nice and keep the tiles in their proper place. The split version can be stored in the game box. For nine Factory rings, you'll get perfect angles between the…
Created Through Heroforge.com Tabletop minis for DND that I have made for either myself or my players.
This is an organizer for the game Azul Duel. It fits into the original box and is taken out during the game to make setup easier. The organizer consists of two trays: one for bonus tokens, jokers, and player tokens, and another for…
I always wanted to have a prop of the mirror from steven universe, so rather than paying $5.00 for a model, I decided to spend hours of my life learning the very basics of Blender to make my own. Now, this isn't as detailed as it could…
These Azul player board adapters attach directly to the original player boards using clip-on connectors , transforming them into a dual-layer setup. Check out my complete set for Azul . (picture 3, 4)
Azul's joker tile promo is really hard to get your hands on, so I decided to make my own. You need to print ten of these. You will most likely get the best result if you can print these in transparent PETG. I used transparent PLA, which…
I got tired of the pattern strips sliding around so designed a tray to hold them. The OpenSCAD code used to create them is also included. If you want to make the holes in the tray smaller, adjust cavity_padding in the code and regenerate.…
Just what it sounds like, something to hold your factories in the box rather than having them loose. This was my first time making something in Fusion 360 so please don't judge too much for how I did it! The .f3d files are available for…
I built this tray to collect discarded tiles from each round of Azul. The tray is the perfect size for holding a large number of tiles and quickly dumping them into the Azul bag when the bag is empty. The instructions have you place the…
Factory organizer with sliding edge Small box for counter and 1-stone Bowl to collect stones during game Center ring
I recently purchased Azul and was sad to find that all the Azul overlays found on Printables did not fit this newer board. The squares were off by a few millimeters. I remixed the original overlay specifically to fit my board and only for…
Insert to replace the official one so the bag of tiles can lay beside the tower. There is also spaces for the factories and wooden tokens. The insert is in two parts to accomodate smaller printer plates. For upright storage, print the…
The full game "Azul", with the board, tiles, score markers and the starter player marker. The tiles are very simple, you just need to print them in different colors. The files include the "color spot", that you will need to glue in the…
NOTE!! No MMU or multitool printer is required to print this game! Are you a l33t h4x0r? Do you have what it takes to figure out the cypher patterns to access the servers and outwit your peers? Will you use your powers for good…? Whatever…
Fue mi primer modelado de una cola de marlin azul, solo tenia un par de fotos y pocos conocimientos de modelado, se imprime bien pero hay una parte que queda suelta pero no afecta mucho y el resultado es genial, se diseño para trofeos de…
I made Azulejo - inspired home numbers that can be glued, hanged or stuck with magnets to many surfaces. As I don't have multi-material printer and I love the glazed look I designed them with the recessed lines that are meant to prevent…
Azul is a fantastic game, and an excellent ambassador for people new to boardgames but MY GOODNESS of all the games out there with oversized boxes, this one takes the unreasonably large crown - the box for Azul is simply way too big. In…
El modelo está basado en el brutalismo y el deconstructivismo, así mismo el modelo busca crear un organizador de escritorio de manera creativa, buscando cosas de series animadas.
Description This grid has been designed to fit on the file field of the board game "Azul". Motivation for this design was, that the tiles get easily displaced if the board is touched. With this grid, the tiles should be kept better in…
After printing the board overlays and a tray for the tiles, I needed a tidy way to store the factory displays, the scoring markers, and the starting player marker. So I made this one. This is a first draft. It works, but you have to tip…
Just a note: I keep the Joker tokens in the small bag that came with the mini-expansion tiles. That bag goes into the tower, leaving room in the large empty section for the bag with the acrylic tokens. If you don’t have the…
This is a custom insert for the game 5211 (Azul Edition) for use with 4 x 6 Photo Caddy boxes. My Photo Caddy is Iris branded.
This is my take on Azula from Avatar: The Last Airbender. You may need to rescale this design to fit your needs.
My Garden Zen is a peaceful haven dedicated to Blue November , a men's health awareness campaign. With a palette of soft blue tones, my garden reflects serenity and the importance of taking care of men's health. Here, among the Zen…
Finca Insert + El Razul Extension
Jeu du Azul complet avec plateau et tuile. Il faut imprimer 20 tuiles de chaque sorte.
Multicolor Score Counter for Azul Board Game (0–99) IMPORTANT: This design and these files were created specifically for my 3D printer. This means tolerances might be tight, and you may encounter some issues on your printer. It's not a…
El archivo 3mf está diseñado a un mayor tamaño en dos camas.
I designed the walls wide enough to fill the box as much as possible. The plastic overlays still push them outwards a bit, but overall I’m happy with how it turned out. In the end, the walls are mainly there to support weight if other…
This is a “pretty minimalist” version of the widely popular Azul board game : “Minimalist” because it's travel-sized and you only need a few colours. “Pretty” because the tiles aren't just plain cubes but are multi-coloured with symbols.…
El clásico barril de Half Life 2, uno de los tantos iconos fácilmente reconocibles de la saga; Esta vez, hecho mate, con tapa anti caídas y facil de imprimir. En una configuración optima, puede llegar a gastar menos de 86g, 28.83metros y…
Držiak na dávkovače mydla SAT – AZUL Dávkovač mydla | Holder for soap dispenser If you like this model, give it a thumbs up :)
This is a back of monitor mount for an Azulle A10. Its tight enough you don't need glue/tape/etch to keep it in.
I printed my box too small, so the original circles don't come out anymore. To cover the ones not being used i printed 4 covers. Sollid Python (https://github.com/SolidCode/SolidPython) to make this in python. If you call the script from…
white until 6.2mm red until 6.8mm finish with blue
S týmto som sa hral v minulom storočí… Použitá gulička z ložiska cca fi 10mm. Skušal som rôzne tvary a rozmery, tento je najlepší…
Estos son los modelos de una cesta pequeña de color azul o naranja. Estas cestas son elementos del campo de Apertix, una competición de robótica libre. Si necesitas más información, consulta a apertix.org . Recomendacion: imprimir de un…
Remix of https://www.printables.com/model/964220-azul-board-game-travel-edition/files by Jirka B. Edited the original model so several subboards can be removed and switched, it may also help if your printer struggles with longer prints. I…
Print instructions from the original source: How to Print Print without supports. Multi toolhead printer is highly desirable to reduce purge waste between colour swaps. Optimized for 0.2mm layer height unless stated otherwise. Optimized…
Reparación de un toallero que se rompió la cerámica
I find the original tip good but it can be improved with these parts. Untested but should work, tell me if you tried it. Try to print it watertight. It's already in the best position for low support usage. Conscientious topology. PLA is…
um escorpião-azul com 8 olhos e garras
Esta tapa trasera está diseñada para proporcionar una solución segura al riesgo de corte con los acabados de las chapas de esta estufa en las esquinas. La ultima versión que subí tiene las equinas redondeadas. Impresa en PLA y un relleno…
Two extra pieces to extend the Azul-mini playing tray for 5 players. Print the original and then add these for 5 players. https://boardgamegeek.com/thread/1918112/5-player-game
Simple Sorter with hole for servo capability in order to dispense tiles electronically or to deal tiles
Remix of https://www.printables.com/model/964220-azul-board-game-travel-edition/files by Jirka B. Edited the original model so several subboards can be removed and switched, it may also help if your printer struggles with longer prints. I…
Multicolor Score Counter for Azul Board Game (0–99) IMPORTANT: This design and these files were created specifically for my 3D printer. This means tolerances might be tight, and you may encounter some issues on your printer. It's not a…
Insert to replace the official one so the bag of tiles can lay beside the tower. There is also spaces for the factories and wooden tokens. The insert is in two parts to accomodate smaller printer plates. For upright storage, print the…
This is an insert / organizer for Azul with the Crystal Mosaic player boards, the Special Factories promo, and the Joker Tiles promo. It has no lid lift, supports vertical storage, and was designed to aid setup and teardown. I was not in…
A basic 3d-printable model of the headgear worn by Azula in the original Avatar the last Aribender cartoon
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
