17 models
Kitchen backsplash tile. Top/Bottom & Left/Right edges line up so it's infinitely tileable with minimal seams. Thickness is from 1.5mm-5mm, feel free to scale that down in your slicer if you want the ridges to be less pronounced. Printed…
The new version is slightly more slim, doesn't throw beams of light to the sides, & the design file is a lot tidier. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following…
I printed this in PETG-CF, for strength and a nice texture. See the photos for recommended supports. It's printed angled to maintain strength and to keep a consistent surface finish. I can provide customized versions of this model for…
This is a lithopane holder lamp. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following settings: Height: 125 Angle: 90 Maximum Thickness: 3.2 &Make sure you upload a 4:3 aspect…
I created this model to help organize the live and dead centers for my PM1030V lathe. This rack sits on the backsplash and has room for the MT2 dead-center, the MT4 dead-center and 6 other MT2 centers. This model was made to fit my lathes…
My daughter got a big bag of Barbie playsets from the 90s, so naturally some parts were broken or missing. The attached photos are the installed part, the printed part by itself (after support removal), and the picture of the original…
After the PTFE tube scuffed up the acrylic top panel on my Trident, I was determined to avoid similar issues on my Voron 0.2. With the correct length of tubing and umbilical wiring, the top panel of the v0.2 is untouched, but the back…
I created this Backsplash to fit Cleberloop's Purge/Flush/Poop Bucket for X1 or X1 Carbon. I had to narrow the depth of his bucket to fit behind my printer. Sometimes the printer ejected too hard and missed the back edge of the bucket. So…
Here’s what I learnt making this: 1st print failed? So the magnet I choose was about 10mm x 1.5mm, so what went wrong? The tolerance in the print! (The below image is flat because of printer problem and g-code mistake, so I just removed…
This is a simple mount to add a 2mm thick backsplash, such as a piece of acrylic/plexiglass, to the Ikea Fjallbo laptop table. Uses a friction fit for the backsplash piece itself, and optionally has a 6mm hole to secure the backsplash…
Most litter boxes are relatively short and if you have male cats who don't squat, these clips will allow you to create a backsplash out of 4mm corrugated plastic sheeting. These clips hold strong to the corrugated plastic but rest gently…
Disco MAC / Backsplash / MAC-10 CS2 charm, designed to add it to yours bag/keys based on the model from game Counter-Strike 2 Remember to scale it up before print!
Outlet / Dimmer Switch Cover Fits Dual switches, dual outlets, or mix of both Outlet must be Decora in order to use Raised from the face, you can use adjustable outlet boxes and bring the outlets to stick out, in order to match your 3d…
Added about 1 inch more usable workspace to the table, and added backsplash to catch loose nots and bolts. I have a 72" length table, and I can print 8 of these to span the entire length. Two models are included: One for securing to a 1"…
Do you want to hang a mirror/art on a tile backsplash but can't drill through the tile? This model lets you hang a mirror from the cabinets above the tile backsplash, so you only have to drill holes for fastening the mirror mounts in the…
Things kept falling behind the work table my printer sets on and it is too heavy for me to move. There is a 2-1/2 inch gap between the the work table and the wall. This covers the gap and gives a bit of additional workspace on top. Each…
Disco MAC / Backsplash / MAC-10 CS2 charm, designed to add it to yours bag/keys based on the model from game Counter-Strike 2 Remember to scale it up before print!
