Counting matching models…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
BB8 From Star Wars. Few different versions. the M just means I did some offsets in meshmixer
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. Bricks are broken down by their hex color for…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Hi all here is my BB8 puzzle to go along with the R2-D2... enjoy You will need supports for the head, pin3 end and pin4. every thing else works without, some light sanding might be needed if your printer cant print arches/bridges well.…
The cap slides in at the bottom of the model. If you put something heavy in the cap and put it on it stands right up.
Design is from Daniel Lilygreen (https://www.myminifactory.com/object/3d-print-star-wars-the-force-awakens-3832) based on it i scaled it to 15% (about 12 cm ball size) and sliced it for 0.4 and 0.6 nozzle size, have fun!
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
Star Wars BB8 headphones stand Prints in two parts and slots together Backplate is thin so it looks good backlit @3DPrintBunny
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- I made this stand to put the BB8 I downloaded from here If…
Cups for BB86 BB install. Includes 41, 30, 29, 28, and 24mm cups, as well as a parametric design that can be altered for other sizes. Cups are labeled for their bearing size (ie the 24 mm cup works with GXP bearings, though measures 23mm…
Who doesn't like BB8? This is a 2D picture, each color printed at different layer height. Didn't print it yet, only have orange PETG, rest of the colors I have in pla.
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
Small decorative BB8 with a base so it can stand. Made with Onshape
May the force be with you. Prints as separate pieces so that the heads of the droids act as the DJ Knobs.
Model Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 swap to Grey At layer #15 swap to Blue At layer #19 swap to White
pressfit tool für Shimano bottom-bracket Ultegra use a M8 rod with nuts and washers you have lying around PLA is enough
A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself! Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist. Designed to…
Inspired by : Pressfit Bottom Bracket BB86 Bearing Remover v2 (for 24mm cranks) Print Recommendations: (what worked for me) Special: add pause to insert m8 nut at the last layer before it is covered (was layer 103 for me) [see image]…
I love the sphero bots and this mockup is of the sphero base. It's a work in progress. I have not printed it yet but wanted to share it with everyone.
With this model you can print a cookie cutter in the shape of BB8 Please note, the amount of walls can be adjusted in order to achieve an optimal result I have added both a gcode file and a .3mf file so that you can use my settings to get…
Made in tinkercad to make a cheap pressfit tool for my Trek Emonda with BB90. Should work with BB86 as well as they have the same inner dimension (untested). Print 2x of each part, then just put them in each side of an M10 threaded rod,…
We named our 2nd MK3S+ at work “BB8”. I couldn't find any BB8 visualizer on printables, so I created one from a bitmap image found on pngfind.com. There will be 2 pieces: BB8 body and the mount. They will need to be superglued together.…
The inner discs are actually smaller, just to be safe: 40 and 23mm. I made this from scratch in tinkerpad, but I was inspired by the https://www.printables.com/model/475853-bb86-bottom-bracket-press model, which is probably very similar,…
DIY press for installation of BB86 pressfit bottom brackets You'll need: 2 printed parts M8 threaded rod, 230mm long 3 M8 nuts 2 M8 washers The hole in the printed part is deliberately undersized so you can drill it out, ideally on a…
Star Wars Force Awakens BB8 Droid Lithophane How I Designed This Created using image attached on site below. http://3dp.rocks/lithophane/ Category: 3D Printing
A useless, simple bb8 token Let me know what this is used for
🧡 BB-8 3D Coaster 🤖☕ Roll into style with this adorable droid companion! Inspired by the fan-favorite astromech from Star Wars: The Force Awakens , this custom 3D-printed BB-8 coaster brings charm, function, and galactic flair to your…
A simple stand for any rubiks cube between 2×2 - 5×5. A 5-10 gram print, and less than a half hour per stand. Enjoy!
Conquer any Crash Derby terrain with BB8 upgraded for other-worldly 4x4 off-roading. I remixed the model from the prolific Peter Farell to make one suitable for a smaller scale board game piece and into rugged off-roader style. There are…
Conquer any Crash Derby terrain with BB8 upgraded for other-worldly 4x4 off-roading. I remixed the model from the prolific Peter Farell to make one suitable for a smaller scale board game piece and into rugged off-roader style. There are…
3 parts: Head Body Hat (Optional) My settings: Layer Height: 0.15mm Initial Layer : 0.4mm Infill : 10% Ready to be painted :)
This is my bb8 i made a while back. It talks.It rolls. The head rotates. Basically it’s nearly a fully functioning BB8. there are A LOT of parts, so please refer to the instructables for what prints are what…
Qidi 4 plus tool head with StarWars BB8 air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
¡Sumérgete en una galaxia muy, muy lejana con este impresionante cuadro en 3D de Star Wars ! 🚀✨ Diseñado con un nivel de detalle asombroso, cada relieve y textura dan vida a los icónicos personajes y naves de la saga. Ideal para fanáticos…
A model that does not fall down easily and does not need to be supported by a base.
I made this droid because i dont like other bb8 models. It uses magnets inside his body and head to move! Just drop one magted into the head and other into the body. It you will use strong magnets head will attach better
this is a BB8 cookie cutter I have created a complete series of cookie cutters about star wars don't forget to see the rest of the models and leave me a like thank you if you want to know how to create your own cookie cutter watch this…
This is an easy to build Disney Star Wars BB8 inspired robot. It's controlled by an Arduino UNO over a bluetooth connection from your smartphone. Part one in our series covers the majority of the electrical assembly, and the creation of…
BB8 droid Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Here we have the 3 pieces I've modified to turn Froggieg's BB8 Soap Dispenser, into an Apple Watch Charging Stand. The head doesn't need support, but the body probably will. You'll need to download the rest of the model at…
BB8 Stand designed by Paulorfo; downloaded from Cults3d.com. https://cults3d.com/en/users/paulorfo. Can be painted to match BB models made. Very easy print. Thanks to the designer for the free print and easy answer to keep the droid from…
Princess Lea sits on BB8 ( Star Wars ) on a pedestal Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 scale 100 % infill 45% lightning ; no support ; print time ~ 18 h Jayo PLA+ Silk Grey MakerWorld :…
BB-8, a beloved astromech droid from the Star Wars saga, captivates with its spherical design and endearing personality. Introduced in "The Force Awakens," BB-8 quickly became an iconic character, rolling into hearts with its chirps and…
Now I don't know about you, but I think BB8 is pretty cool. So, I decided to make a BB8 ornament wearing a Santa hat. I did not paint mine however, it could absolutely be painted and would look really nice painted. I thought it would be a…
We recently went to Disney world and bought a remote control BB8 from the Droid Depot. The Version we bought did not com
![Pressfit Bottom Bracket BB86 Removal tool [FSA 19mm Shaft]](https://media.printables.com/media/prints/03aefcfd-29fe-4657-ab3e-1add29cf3a4c/images/10604532_c0abf9fb-9d32-4254-852c-d808dd6a86d8_30c5514b-8022-43e7-9996-b3050ec2c84e/bike_hammer_render_2.png)
