18 models
A design for mounting a Beacon3D H Normal probe onto the tool-head of the Qidi Plus4 Update: 10th April 2025 I have uploaded an M3 screw variant of the mount for later model versions of the Plus 3 that use M3 bolts instead of 2.5mm…
Updates Aug.13.2024: Fully working on stock hardware and even stock firmware! You'll need to hide some .py files to make the [probe] cfg errors go away. I followed this discord user's instructions successfully.…
Attaches where the original probe is mounted. The holes for the probe are big enough to have threaded inserts. I don't know if this would work with the AUX fan. I have mine removed. Offset: X0 Y20.6 You should measure Y offset yourself as…
This is an X carriage mount for Stealthburner for the MGN12 rail in the UHF/Volcano lengt Check your clearance to see if the specified ~2mm height difference to the nozzle fits (may vary depending on the nozzle)
I found one model that was close to what I needed but lacking few things to be perfect. When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido…
Easy under base mount for Beacon3D on a hero me setup, you can adjust the z height in your slicer to fit your application. Holes are sized for m3 inserts, uploaded model is 18.5mm tall, I am using a revo 6 on an anycubic kobra max so Im…
offset: y: 40 Thanks to the following organization/company for providing all of us with the technical information necessary for the creating of the thing: https://vorondesign.com/ https://beacon3d.com/
I'm designing a large printer and wanted to use a Hemera XS extruder. I found this model by Bjørn A. Andersen and modified it to fit my setup which is a 2020 rail with a MGN9 linear rail on the top and bottom for the extruder to slide on.…
I Only Cut and fit for the Goliath lenght So Nothing Special I add also a split version to make the Belt installation but i see in the input shaper results it is not so stiff
this mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
Mount to install a Beacon3D RevH on a stock Creality CR-10 Mini print head. Should also for fit older CR-10s and Ender 3s. Beacon offsets for this mount: [beacon] x_offset: 0.0 y_offset: 16.0 Print Settings Rafts: No Supports: No Layer…
Adjusted the original to match the Hemera XS, plus added the mounting point for the Beacon3D scanner mount (see profile)
Modded front notch and screw mounts for the Beacon3D
Made a mount for the new Beacon3D bed leveling scanner for my Tronxy X5SA Hemera mount.
Small cleanup of amazing design by Stew675. Version in photos was printed from ASA-GF on Prusa Core One, 0,15mm layers, 4 walls, 20% infill, supports everywhere. Modified to clear factory air guide my 2025 printer came with Converted to…
Attaches where the original probe is mounted. The holes for the probe are big enough to have threaded inserts. I don't know if this would work with the AUX fan. I have mine removed. Offset: X0 Y20.6 You should measure Y offset yourself as…
