Search results: beefier

Counting matching models…

FNAF Freddy Fazbear (beefier)

MasterChief24's model was weak at the hips, waist, wrists, shoulders, and ears. I beefed them up. Category: Model Robots

Downloads: 787
Likes: 40
Rating: 0

Order a print of this model

PrintablesJCote

Remix of op00's Zipper Pull . I needed a couple of new zipper pulls for a laptop bag that sees daily professional use in the field. It has a really fat zipper with quite a heavy pull. The original design by op00 was great, but far too…

Downloads: 726
Likes: 88
Rating: 5

Order a print of this model

PrintablesKai

OTF Knife with Dual Rail & Beefier Negative Hook & Rounded Slider

3 improvements towards the original OTF Fidget Knife model: Dual rail for handle & blade for better rigidity Beefier & stronger negative hook that is harder to break Rounded slider for easier to flick Oh, and i also removed the holes on…

Downloads: 680
Likes: 36
Rating: 4.38

Order a print of this model

PrintablesDoug Joseph (design8studio)

Scratch Attach - Printed, Telescopic Back Scratcher v2.0 - BEEFIER - the "I have grandkids" edition!

v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…

Downloads: 366
Likes: 38
Rating: 5

Order a print of this model

PrintablesMakeItSlow

Beefier Latch for Gridfinity Storage box by Pred

Made a beefier latch that you can get your finger under. Added holes that you can put a paracord through to make a zipper pull style handle to easily unlatch. Files available here: https://makerworld.com/en/models/623799#profileId-548041

Downloads: 359
Likes: 81
Rating: 5

Order a print of this model

PrintablesFrantisek Veverka

Beefier Clicker

There is slightly tighter hole for the hinge, but nothing dramatic. I've printed it in 0.2 layer height from PLA+ no supports without any issues.

Downloads: 279
Likes: 24
Rating: 5

Order a print of this model

PrintablesFrio

Prusa i3 MK3 Y-Axis bearing strap - beefier remix

A simple remix of https://www.thingiverse.com/thing:1819779 to make the screw tabs a bit beefier. For me, they seemed to work loose over time and after repeated tightening the screws started to slip. This was simply an attempt to…

Downloads: 177
Likes: 6
Rating: 0

Order a print of this model

Printablesjesse.wagnon

6384 Outrunner Motor Pod. Updated with a beefier version also

Updated to keep the front bearing secure without having to epoxy it in. I designed this motor pod to mount a 6384 motor to a soft top surfboard. The 3 phase wires run internally and I use 12awg silicone wires. I use either ASA or PETG,…

Downloads: 153
Likes: 11
Rating: 0

Order a print of this model

PrintablesSyco54645

Ender 3 c270 beefier camera mount

Remixed the camera mount for a better connection. Mount taken from https://www.thingiverse.com/thing:3817940 but I am unable to list a 2nd item for the remix source. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…

Downloads: 129
Likes: 15
Rating: 4.5

Order a print of this model

PrintablesWaschBaer

Siboor Trident aux fan - Beefier Legs FIx

made the legs thicker and stronger, added optional way to screw in 2 m4x40 screws in the center legs to increase strength even more! ( not needed though ) rounded of some of the corners to be in line with the other curves scaled object up…

Downloads: 111
Likes: 22
Rating: 5

Order a print of this model

PrintablesLong

OG Star Tracker V2 Mods (Single piece/beefier gearbox, logo doors)

Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…

Downloads: 92
Likes: 9
Rating: 0

Order a print of this model

PrintablesTravtron3D

Lucky 13 Beefier Arm-Armor

A simple upgrade giving the Lucky 13 Armor a bit more heft.

Downloads: 83
Likes: 50
Rating: 0

Order a print of this model

PrintablesHugo

Beefier ½" EMT conduit bowden clip

I'm printing those in some weird “though” PLA, and it kept splitting when inserting the bowden cable so I made this beefier version.

Downloads: 78
Likes: 18
Rating: 0

Order a print of this model

PrintablesScheini79

Ender 3 Belted Z - Beefier Brackets 20 teeth idler

Just a quick remix for M3 and 20 teeth idler Print Settings Printer: FLSUN Super Racer Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: extrudr greentec pro carbon PLA carbon black Post-Printing ============= Category: 3D…

Downloads: 60
Likes: 10
Rating: 0

Order a print of this model

PrintablesPix

Beefier carpet feet for Garmin Index S2

The carpet risers supplied with the Garmin Index S2 were not wide enough in my case, the scale did not measure accurately, so I made my own much beefier version. For maximum accuracy print from PETG with 999 perimeters.

Downloads: 50
Likes: 3
Rating: 0

Order a print of this model

Printablesdaveyk021

A Beefier Mouse Wall Holder

Printed in Creality Black PTEG on a K2 MAX. No special settings; printed upright, no supports. Screw holes designed for #6x1" Phillips Flat Head wood screws.

Downloads: 48
Likes: 1
Rating: 0

Order a print of this model

Printablesgrajohnt

A Beefier Banggood Power Supply Case

There are many different cases for various versions of Banggood power supplies out there, but I didn't find one that really fit what I wanted for one of the largest - the DPS5015 (50V 5A). I didn't need the high current, nor the top end…

Downloads: 41
Likes: 5
Rating: 0

Order a print of this model

PrintablesAccipiter Tachiro

Firefly Shell Collector - Beefier

The basket model has thicker walls for increased durability, and a slight widening of the basket opening to lessen the chance of the shell bouncing off the basket's frame back into the chamber. Several 3M-sized screw holes along all 4…

Downloads: 39
Likes: 10
Rating: 0

Order a print of this model

Printablesnhchiu

V0.2 Beefier Bed Mount

These printed parts are known to crack along the layer lines through the screw holes if there's too much tension. This mod adds more material on the side of the screw holes so it's less likely to crack and probably will help with the…

Downloads: 36
Likes: 12
Rating: 0

Order a print of this model

PrintablesSAVAGENYHK

3D Set Buggy Beefier Exhaust

The original buggy set exhaust kept breaking on me, so I beefed it up to make it stronger without making too many changes to the original exhaust.

Downloads: 30
Likes: 11
Rating: 5

Order a print of this model

PrintablesKramer

Beefier RatRig Toolhead 1.0 with Beacon Front

This is for the excellent ratrig toolhead v1.0 beacon mods by Ferdinand. That mod worked very well, but this piece broke and I wanted to make a sturdier version. Printed with glass filled ASA.

Downloads: 28
Likes: 1
Rating: 5

Order a print of this model

PrintablesKuroi

Beefier Z constraint for RatRig V-Core 4.1

I didn't like how 4.1 constraints were so flimsy. This one is beefier. It also has a channel for Z rail, which prevents the part from twisting when you screw it in. Bearing retainer is lowered so that it actually constraints something.…

Downloads: 21
Likes: 6
Rating: 0

Order a print of this model

PrintablesMartiniprints

Enderwire Beefier, Square Nut Y Idler

🚀 Quick Spotlight: EnderWire Beefier Square Nut Y Idler If you're building or upgrading a Voron-style EnderWire/SwitchWire printer, here’s a golden opportunity to beef up your Y-axis. Enjoyed the model? Help me save up for another Voron…

Downloads: 16
Likes: 4
Rating: 0

Order a print of this model

PrintablesAero

Beefier interlocking, magnetic, stakable project trays

Re-did links, no supports, and used one 12mm x 2mm magnet

Downloads: 15
Likes: 5
Rating: 0

Order a print of this model

Printablesrandy_s

Anycubic Photon 5015 blower fan shroud/mount with beefier supports.

The original fan shroud mounting arms for the fan were just too flimsy for my taste so I whipped this up. Using a 4mmx30mm screw with washers and nut for the fan mounting, and 2: 3mmx15mm screws with washer for mounting it to the photon.…

Downloads: 13
Likes: 3
Rating: 0

Order a print of this model

Printablesninditsu

Pigrrl Zero Bottom Case Beefier Joint

I added more material to the joint to prevent breaking issues when connecting the two halves. Category: Electronics

Downloads: 11
Likes: 1
Rating: 0

Order a print of this model

PrintablesLeDomme

Beefier Buttstock for VRGM VR

Buttstock broke two times while assembly, so I beefed it up. Remix from https://www.thingiverse.com/thing:2828833 Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 20 Filament: Generic PLA Category: Video Games

Downloads: 8
Likes: 1
Rating: 0

Order a print of this model

PrintablesCannon

Neptune 4 X Axis Webcam Mount Beefier

I won't write a description, and YOU CAN'T MAKE ME!!?!?!?! Meant to mount to the left (right if you mirror it) stepper motor cover so that the webcam moves with the extruder, great for auto fail detection. Huge thanks to the original…

Downloads: 5
Likes: 0
Rating: 0

Order a print of this model

Printablesdwp

Beefier towel holder with no support

Loved the original concept, simplified it by making it assemble via 5 x M2.5x10 self tapping flat head screws.

Downloads: 3
Likes: 0
Rating: 0

Order a print of this model

Printables

OG Star Tracker V2 Mods (Single piece/beefier gearbox, logo doors)

Order a print of this model

Printables

Beefier towel holder with no support

Loved the original concept, simplified it by making it assemble via 5 x M2.5x10 self tapping flat head screws.

Order a print of this model

Printables

Beefier mini t-driver

So I've been using my old mini t-driver for a while now - http://www.thingiverse.com/thing:65138 - but I wanted something a little beefier as I found the old design tended to crack after a while. Here's the newer design. Print Settings…

Order a print of this model

Printables

Beefier Clubmaker ruler base

I have a larger ruler than the one LVD used in the original so I tweaked things to fit. My ruler is an older version of this one from The Golfworks: https://www.golfworks.com/the-golfworks-48-aluminum-golf-club-ruler/p/rul48/ This ruler…

Order a print of this model

Printables

Beefier XBOX (+ Elite ) Controller Wall Mount

I wanted a controller wall mount that doesn't look and feel so flimsy like most of the designs available. This is narrow enough to fit the series 1 elite controller with the paddles still attached. You can also print a cover for the…

Order a print of this model

Printables

Shorter and beefier Wall hook

This is a shorter, beefier and larger version of smaier's nice wall hook . I have made an eye to hide the screw. You can get it here .

Order a print of this model

Printables

Beefier Drawer for Gridfinity Modular Drawer System

Based on Gridfinity Modular Drawer System by Chipp Walters . I felt the original drawer was a bit flimsy, so remixed it by thickening the walls and redesigning the handle. Walls are now 2mm, and the handle attaches flush with dovetails.…

Order a print of this model

Printables

Beefier top part for handle

I'm printing 96% scale of original model and top part breaks easily even despite printed in PETG, so i've modelled stronger one so one can glue it on top of hilt if original one is broken. Holes made with little ‘raindrop’ cut on upper…

Order a print of this model