Counting matching models…
Available at: https://www.ebay.de/itm/318664437733 Update 2026/08/05: The model is NOT COMPATIBLE with AEG Electrolux AXP34 and EXP34. See below for a compatible mod. This mod enables you to turn the single hose AEG Chillflex (Pro) into a…
I loved the idea of the Laptop Saver cup holder (link below), but it wasn't quite what I wanted so I made my own, inspired by it. I suggest you check out that model before printing this one, it might be more to your taste. This model…
I made this to feed the filament up from below an IKEA Lack Enclosure and hopefully keep the filament dry. It also works to feed it top down by rotating the PTFE coupler 180°. I startet out by remixing the Parametric Enclosed Stackable…
My first "finished" full body creature. Took me about 2 days to finish. I tried to add more detail, but my computer isn't that fast at processing a lot of things in a given time. Because of that, I can't repair the model. Update #1…
The need for the super important stuff to be “at hand” resulted in this simple organizer for Skoda Kodiaq (1st gen from 2017-2024) and Skoda Karoq (non tested yet, but shall be the same size). You can put there: - 2 coins for shopping…
Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…
I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Print it in PLA or PETG, your choice Print Settings [PLA]: Layer Height - 0.12 Walls - 2/3 Infill - 50% Gyroid, Multiplier-2 Tree Supports (Auto) Z distance - 0.18/0.2 Support Interface - Grid/ Concentric Interface spacing - 0- 0.1mm
Inspired by the Burrito Bumper™ (link below). I couldn't find the original model files so I designed my own version inspired by the original. Print with the large funnel opening down on the build plate. Will print on a Prusa Mini+. Print…
This model is compatible with the lego system.
At this point, my 3D printer really only exists to mask my serious board game glamorizing problem. While there are already 3D-printable inserts for Above and Below, none of them were designed by a psychopath who protects cardboard tokens…
This is my design of dish that is ventilated from below. Objects placed in this dish dry fast, as there is an air flow possible from all sides. How to Print the Dish Print the dish with the flat bottom on the print bed. In order to get…
[Update 3 JULY2025] CenterUnit_v2.stl LowerAzimuthPlate_v2.stl //Modified clearance for bearing UpperAzimuthPlate_v2.stl //Modified clearance for bearing and change M4 to M5 for adjustment parts. I have made a type of Polar Fine…
All retail c13 plugs have long tail. So I designed flat C13 plug. You need : LZ-F-10 1ea https://www.aliexpress.us/item/2251832825387921.html Female Insulated Spade Wire Connector 3/16'…
There's a great amount of RTK mounts for the YUKA (1. gen), but I couldn't the perfect match. Here's one with 90deg angle installation. Find the original antenna mount tube, in the source of this remix. Work-file added as attachment.…
When i was looking for a seaglide to make for my brother I couldn't find any that i liked. So i took it into my own hands and designed one. I will hopefully down the line make a multi colored one soon. Printer: Ankermake M5 Filament:…
Below raiser for the Creality K1 to avoid things get under the machine, improve the general support and improve the below ventilation Not suitable for the K1 Max due that I don't own it. You have the full version if you own a 400*400…
If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
For this design you will need four 608 bearings, two m3x20mm screws, and two m3 nuts. You will also need to print two of the sets of bearing covers. Huge thanks to B&B Tech for the original design and the advice on improving my design.
This thing has 4 holes that are countersunk to allow for use of standard drywall or wood nails with the proper head. Most brands will be flush with the surface. I only needed to drive in 2 screws and not all 4, but I included the extra…
As much as I love the cardboard insert artwork that came with the game, I love organization more. This has plenty of room to store the deluxe kickstarter components as well as the original cardboard. It also has room for the…
I stumbled upon the Design by Psyclist and thought it was neat. Printed it aaand noticed it's hard to read because of the angle. So I decided to tilt it back a little. It works better now for my application. I just printed both from PLA…
in the photo are previous versions of the models, I modified them a little so that the LED backlight would probably fit in its place. Please note that the hole for the nut was 7 millimeters, although the model has 8. I think that the nut…
This is used to take pictures of tools at a much more consistent angle then if you try to do it by hand. Included is a short and long leg (multi for which you want to use). The long leg you will need a big printer for. I did 25% infill…
Easy to print holder for filament. Used below a shelf, table, ceiling, enclosure or alike places. To be used with prusament and a lot of other brands
Displays kyber crystal I printed from https://www.printables.com/model/483882-kyber-crystals-and-container-inspired-by-star-wars tea light link…
This uses the four hole pad that fits on the Dewalt orbital sander and several other brands. For hardware it uses four 4mm nuts, four 25mm + button head screws or similar, and pad. Hex shapes are in the holes to accept the nuts. I bought…
Designed for use with 4-5mm countersunk screws. I used 5mm thick felt tape from Aliexpress as a cushion. With this tape, it fits nice and snug
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
I wanted a below desk cup holder sized specifically for my desk and water bottle or can of soda. Uses supports that remove easily. PLA+ is fine, print with 4 layers or so and about 6 solid bottom layers for strength. I don't drink coffee,…
A Clamp to mount a Steinberg UR242 Audio Interface below your desk. Can easily be customized to fit other Audio Interfaces / machines. Print Settings Printer: P3DA Rafts: No Supports: No Resolution: 0.4 Infill: 25% Filament: Reflow rPETG…
This is an insert for the Above and Below board game. BASE GAME ONLY. I know, oldie but goodie. I just got it second hand and it really needed an insert. Hopefully will get some expansions and promos in a near future… But for now, this…
Hello Printables Community! Introducing what is probably the smallest possible controller holder designed for under-table mounting! This ultra-compact and lightweight holder weighs only 7g (with my settings) and is as small as possible…
mounts Soundblaster below the desk at an angle, so that the start of the dial matches the edge of the desk and the dial is easy to handle (photos are from earlier version, do not fully reflect this) prints well with any nozzle size or…
The insert holds the core game and the Desert Labyrinth and Underforest expansion. The box will close fully over the insert and can be stored in any orientation without spilling or mixing resources. The photos show the game with upgraded…
Since I couldn't find a printer housing for the Prusa XL that met my requirements, I designed my own enclosure. My requirements were: Cost-effective Minimal filament usage for printing the parts Free of shrinkage issues Free access to the…
We reload our own ammo and instead of spending money at the store I decided to make one for smaller caliber ammo. Will hold .388" ammo and below. holes ¾" deep. holds 45 casings Infill at 5% works, but probably should be 7%-10%. Print…
Mount using some double sided tape. I recommend nano- or gecko-tape. The ledge on the monitor will carry most of the weight, so the double sided tape is really just to keep it in place. Printed fine with 0.6mm nozzle at 0.30mm layer…
You can never have enough Torpedo Bays, so here are 2 more on the Belly of this awesome Corvette. Thanks to the original model, it just needed a little work. Have fun!
This model is compatible with the lego system.
This is a replica of figure H from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 This is the Beholder,…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: Added an Apple wireless charger end as an option.…
The angle can be adjusted, and the purchased adhesive method is fixed under the display using two M2X6 countersunk screws.
This is a replica of figure I from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Roper is a classic…
This set of pieces, for some of them derived from a first enclosure based on the IKEA Table proposed by Prusa, and from other models for supporting the spool, enables the user to put the spool below the printer and not above, which can be…
This is a replica of figure A from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Rust Monster first…
This is a replica of figure I from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 This is probably the…
After getting the MK4, I noticed how slobby the cables below the MK3s mainboard case looked, so I designed this simple cover to hide them. It just clamps on the edge below, very simple. Two 3x10mm screws with nuts are needed.
A braket to install dirktly below Stairs. To get extra Storage. It is prepaired for 20mm shelfs and 4mm Screws (Use Screws with a flat Head). Links = left Rechts = right Mitte = Center I made it with PLA but i think ABS or PETG would be…
This is a replica of figure C from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The D&D doppelganger…
This is a replica of figure B from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Intellect Devourer…
I am running my electronics outside an enclosure, I have a 20x10 cable chain. I am running this (printed with CF/PETG) as a way to use the extra cable chain I have to run all those misc cables such as Dual Z motor, Z endstop, Y…
This 3D-printable lower limb is designed as a training accessory for a full-body Laerdal training manikin. The model simulates a below-knee amputation and is intended primarily for realistic medical simulation and practical trauma…
A unique 3D printable creation — this Bird Feeder Seed Catcher Tray, Attaches Below Feeder, Reduces Waste Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with…
This is a replica of figure G from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Yuan-ti first…
This is a replica of figure F from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Aspis first appeared…
Juice box holder / Saftkisten Ständer a stable and sturdy holder to keep the juicebox high enough to properly fit a glas below without placing it at the counter top's edge. Juice box ist placed slightly tilted to ensure proper flow.…
This Apple Airtag holder to be placed below bike sadle, need to use cable ties to tight them on both side, this model has feature to easy replace
I liked the idea of the original mount on the left front side of the Prusabox as it didn't require disassembling the c920 to use. However, I wanted the camera closer to the bed to improve the view of initial layers and also to better…
With this small piece of plastic, every cyclist can now be visible at night. Using this simple design, a cheap rechargeable LED backlight can be mounted under a saddle. Now, every cyclist can enjoy good visibility at a low cost without…
First try with tinkercad, i hope everything is in order. I printed the part with PETG and eyeballed the size for the original screw positions.
Fit far more in a wardrobe: hook the top of one onto a hanger's neck and hang the next hanger in the hole below, then the next. The triple version takes three hangers at each level. DETAILS • One plate makes 6 singles and 2 triples; 60 mm…
Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
This simple, durable sign is designed for imaging studios, archives, and collections handling areas to clearly indicate when artwork or prints are stored beneath a protective cover or folder. Design: Two-part model — the base plate and…
This model is compatible with the lego system.
This 3D printed organizer keeps the components from the Above and Below Haunted board game neatly stored in a single container. The design is optimized to hold the ghosts, boats, mystic brew, pearls, and all goods tokens together so setup…
[Update 3 JULY2025] CenterUnit_v2.stl LowerAzimuthPlate_v2.stl //Modified clearance for bearing UpperAzimuthPlate_v2.stl //Modified clearance for bearing and change M4 to M5 for adjustment parts. I have made a type of Polar Fine…
in the photo are previous versions of the models, I modified them a little so that the LED backlight would probably fit in its place. Please note that the hole for the nut was 7 millimeters, although the model has 8. I think that the nut…
Basically a sign to clip on to your rigging so it is not removed accidently by a passing member of the public when you have descended… it is particularly useful for those who ventured in if it is easily access due to the entrance etc……
With the funnel you can, for example, fill windscreen washer fluid into your car. It's practical that you can hanging it at a bottle / canister.
To gain some space when not painting i made this simple under the desk mount to keep my wet palette in horizontal position and easy to take. The rails are attached to the bottom of desk by 3M double sided tape. Printed in PETG with…
Funnel for pots, watering from below. Watering flowers from below, I also recommend pouring kermazite on the bottom of the pot, and then soil
These are organizers to hold the large number of tokens in the board game above and below. You can use rubber bands to secure the tokens in the holders for storage and transport.
I create mostly utilitarian functional models. Generally addressing the need is the primary concern and looks come secondary, if considered at all. Please leave a comment if you print this and find it useful! I needed to run a garden hose…
This simple, durable sign is designed for imaging studios, archives, and collections handling areas to clearly indicate when artwork or prints are stored beneath a protective cover or folder. Design: Two-part model — the base plate and…
FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 snap on mount for the air vents below the central screen with a screw adjustable ball point. It uses a M5x8 brass thread insert and a M5x12 screw. The rectangular…
FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 snap on mount for the air vents below the central screen for smart phones or other devices with a HR mount system and an adjustable ball joint. For the building…
This is a replica of figure D from the box "Dwellers Below", number 2012 from Grenadier (see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 The Cave Fisher first…
A unique 3D printable creation — this Bird Feeder Seed Catcher Tray, Attaches Below Feeder, Reduces Waste Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with…
This 3D printed organizer keeps the components from the Above and Below Haunted board game neatly stored in a single container. The design is optimized to hold the ghosts, boats, mystic brew, pearls, and all goods tokens together so setup…
This model is compatible with the lego system.
Managed to manipulate the original (great work by original creator) so that it has clearance foe original y limit end stop switch.
For this shelving https://www.fivebelow.com/products/6-cube-multipurpose-storage-rack-35in-x-235in from five below.
Case for Baby Puzzle. Baby Puzzle by Katarn | Download free STL model | Printables.com . Inside measures 60x46x10mm and lid has Baby Puzzle inset which is barely visible in picture. Also included is a blank lid. PLA, 0.20 layer, 20 infill.
One of the weels for the tray was missing on my preowned Husqvarna qsi7132w stove so i decided to make a new one. Added the orginal part in the picture as a comparison. Printed with: PLA 0.2 mm, 100% infill. I printed with supports just…
Model off the original parts with small tweaks to make it stronger. Can be used with 10 mm rod too
This uses the three-hole pad that fits on the Dewalt orbital sander and several other brands. For hardware it uses three 4mm nuts, three 4mm X 25mm to 35mm button head screws or similar, and pad. Hex shapes are in the holes to accept the…
