196 models
It's a minimalist stand, with a customizable width. Perfect for anything. Need More Slots?: Prints this Divider separately. Have all the slots you want! Adjust The Width: You can stretch the base model in z-direction in the slicer for a…
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
The Hybrid Betweener Tired of having to swap betweeners depending on the material you are printing and its ventilation needs? And where do I keep the spare betweeners when they are not in use? This project aims to provide the only…
This is a exact recreation of the Treasure Chest which was a Bonus Item of the The Legend of Zelda: A Link Between Worlds GAME Big Box Collectors Edition. Not everybody was able to get one, so here is your chance to print one yourself.…
Remix of two models, my intention was to use waste water from cleaning filtering sand in some good way like to water some plants/grass instead of just to let it out. My filter have 32 mm hose and I wanted thread for hose quick connector…
Made to fit those: for example https://www.adafruit.com/product/4543 (although their photos show different one) I bought it from Mouser
There are already similar attachments on the network, I even tried to print one option, but I didn’t like it. Indistinct fastening system and the inability to measure the distance between large diameter holes. My attachments also have a…
This model is compatible with the lego system.
Didn't like the idea of a big ol' hole in the lid of the K1 so I sealed it up and added a ptfe tube hole at an angle
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
This is a simple remix of a couple of betweeners to retain a hexagon pattern while still having a backdrop to “seal” it (as much as it can be sealed in this system). Print flat side down. Easy enough.
printed 15% infill Pla
Cover for the Gap Between the Lid and Frame for Creality K1C
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
Description I had issues with the rear betweener not fitting nicely because of the extruder cable. I made the gap for the cable bigger while also extending the wall on the right side so that it fully slots with both lid risers on both…
This is simply a cover for the gap between Creality K1's lid and frame. That gap always bothered me as heat rises and that gap is at the top. So, I designed this cover to mitigate that problem. Creality didn't make covering the gap easy…
I designed these framed betweenners because they looked better and more in keeping with the rest of the structure
My fish tank came with a very small glass lid. I wanted to cover most of the tank while still having quick access to feed the fish so I cut down some scrap acrylic and modeled this hinge to clip the acrylic panel onto the existing glass…
At my Core One, dust and debris accumulate in the gap below the door between the frame and the display. This clip fills that gap.
This model is compatible with the lego system.
Added the capability of easy close vent. 100% Compatible with original model for Hinged Lid Riser Can print using standard PLA and standard 0.2mm parameters. Print Riser Betweener in vertical and add minimum support for slider section.
Its a simple clip for cable management (gap between metal brace) for Sovol SV06.
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Creality K1 Hinged Riser Shutter betweener.
I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without lifting the lid. So I made a thing which needs only 5mm clearance between the top and side glass. Just press fit the…
I needed to but shelves between 2 wood 2x4in studs. I used these brackets as shelf holder. Printed in PLA+ If you download and use please like this model and upload a make picture. Thanks
Sometimes you need to mount something to the rail that is offset/between the normal Link rail mounting location, maybe to avoid a tall tool mounted on the rail below, or a wide thing that is mounted to the left or right. This adapter…
A comical, yet serious sign that is sure to fit in with any 3d printing setup. A 3mf file with color changes is provided, and NO MMU IS REQUIRED! Wanna use it for a different machine? (cnc, router, mill, lathe, etc…) Make your own remix…
Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…
cutout in upper mech and spin ring for 6.35 mm ball bearings:…
Was able to pint without support but you might want to add some in the void.
this the second shroud that is custom made for the MKII. and will work with the standard short barrel and will work with the normal top rail like the original MKII barrel retainer (what I usually call a shroud) have fun with it, and…
A funny sign - “Remember the only thing standing between you and your dreams is your appearance, lack of talent, and general personality”, dual colour design, printed in ZIRO PLA Diamond Blue and Overture Matte White PLA. For more funny…
This is the hook for the trap door latch on the storage compartment between the driver and passenger seats on the back "wall" of the convertible (roadster) model of the Audi TT MK1. There is just no good name for this compartment… it has…
Designed a slidable air vent betweener that can be opened or closed. Remixed from a solid betweener made by Joe Cooper. This one has a slidable air vent that can be closed or opened. You can have the betweener closed eg. when printing ABS…
After I have downloaded and printed the nice cable cover from John @John_Smith (Thanks a lot). I saw the terrible cable salad behind the display. Immediately I made a Cover for this. Printed with PLA galaxy black, I love it.
This model is compatible with the lego system.
Pegboardhook Lochdurchschnitt = 4 mm Lochabstand = 1,5 cm bzw. 3 cm Länge = 2 cm Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 20 Category: Organization
This strong peg allows you to hang some tools, or a hose, or extension cord right between the normal link rail mounting location Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) -…
Maybe someone will find it useful, there are many variants of the ADXL345 boards, I've got a smaller one so I've uploaded my remix of Q's mount.
Funny Sign - "Theres a fine line between saying too much and saying too little. I walk that line like a drunken clown at the circus"- dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my…
Tired of using a flashlight to see your prints? I sure was! Can be printed w/o support. Can print 2 at a time on the K1 if you are careful how you place them. Based on JCs excellent lid riser and hinge! Requires soldering etc… for the…
Back betweener that can be locked in the rightmost cable hole
Ndebele woman - Born Between Bold Lines
Creality K1 Cover for the Gap Between the Lid and Frame
I used petg for this use organic supports
This is a combination of an existing remix tool holder for the Ender series on Thingiverse and JC's Riser system for the K1. Added the proper supports/angles to ensure a snug fit, then tacked on a modded version of a Thingiverse remix by…
I found that the rear plate didn't fit the K1C due to the cable guide. So this is the rear betweener plate for the Creality K1 Riser design from Joe Cooper. Also, I made thinner Front risers, to avoid the printer head touching the risers.
Remixed SYSDmg design mainly to add space for 2 wires to go in the attended slots of the metal frame. It allows to avoid the printer carriage to catch one of the wire (the main wire, and in my case an USB cable for my Cartographer3D).…
print info. Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Perimeters: 2 Solid layers top/Bottom : 4 Material: ASA, ABS, PLA, PETG
This is a fan mount for my Fractal Define 7XL case that I use as an NAS. The fan provides airflow between the two bottom HDD cages. The mounting holes are 105mm apart and fit any 120mm fan mounting holes/rails of a PC case. The fan used…
I needed to tighten up the space a little to squeeze one more drawer into my space.
I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…
The name says it all. Re-shaped it to fit in a Lian-Li 011D Case, with bottom fans installed, snug fit holding a 4080.
Photogrammetry scan of the sculpture "Man And Woman With Small Child Between Them" by Norwegian sculptor Gustav Vigeland exhibited in Frogner Park, Oslo, Norway. Prints perfectly with organic supports.
I cut the slots to clear drag chain bracket
These adapters exist in many different forms and sizes. I just wanted to have the bare minimum. Made for 40 mm wide tracks.
when using the lid riser which makes the bowden tube naturally bent and not pressed into the chain that feeds the cable to the head, I noticed that if we print on the left part of the table, the mentioned chain with the cable hits the…
Leo and Cleo bookends from the 2000's PBS show “Between the Lions”. This model is meant to be printed with the lions on the bed. This model is based on the title card shown during the show's opening sequence.
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
Cover for the hole between the headrests. WEINSBERG CARACOMPACT 600MEG PEPPER Print Settings Printer Brand: Prusa Printer: i3 MK4 Filament: PRUSA PETG Category: Automotive
Motivational Sign - “The difference between Try and Triumph is just a little Umph”, multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign…
This is an insert for the Essential Edition of Between Two Cities . You need to remove the existing cardboard insert to use it. The organizer fits sleeved cards at premium thickness (picture shown are non-premium Swan Panasia sleeves with…
wanted some slots for the rear Betweener so remixed and added slots
Removed 2mm x 41.5mm notch to allow betweener to clear the chain support
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Probe the Z offset between Z-probe and nozzle This is for calibrating the tool offset between a Z probe and different tools such as a nozzle. Simply home on the Knobprobe with a z-probe such as a Clicky probe, a BL-touch and many more.…
The hinged transformation is really interesting. Using 3D printing to recreate the process is super intuitive. I created this model with the idea that all the hinges should be print-in-place. The hinge might need a bit force to break free…
This is a custom organizer for the boardgame between two cities, including the expansion Capitals using the original box. The tiles containers have a ramp to help storing them diagonally. You have to print normally 2 containers for the…
About: Remix of 3 GoPro Extensions Strong Ends by tmorris9 . took the longest one and then extended it length between screw holes is 220mm printable on Prusa Mini+ diagonally total size something under 234mm Please give a like and post…
Nice Ender3 / Ender3pro Ender3v2 mod - front panel like in Voron Trident: https://www.printables.com/pl/model/428500-tridender-skirts-for-ender-3prov2 My pictures (screenshots) says all - in this project - is missing small red distance…
Suggest to rear panel standing with supports. Print with ASA or ABS or it will warp if you print closed with high temp.
Cover your blank fan space! Block that extra space from ruining the flow in your system or leave the mesh open to add flair to your case. Originally designed to make 140/120mm compatibility look better, the solid ones can be used…
Dieses 3D-Druckmodell ist speziell für den Grand California 600 erstellt worden, um das hineinfallen in die kleine Lücke zwischen Küchenzeile und Bett zu verhindern. Da das Bettgestell aus Holz gefertigt ist und anscheinend die Bohrungen…
This is a small alteration for the rear in-between panned for the top cover riser. v1 - Include the rear Bowden Tube access. v2 - Removes the rest Bowden Tube access.
Fishing lure - offset peg for more wobble and stronger connection between halves. Use this for more movement.
Went to visit my brother's apartment and both the bathrooms in his apartment have showers with no level surfaces and no good place to set a bar of soap with it sliding off as soon as water is turned on. This is a solution I came up with…
https://www.rcsb.org/structure/1aoi
REVISION 08/01/2023: Uploaded a revision of “Endcap” and “Side A” to more securely fasten the two together and also to raise the assembly off of the floor of your storage tote by a couple of mm. ORIGINAL POST: You will need x2 M3 threaded…
3 Walls 20% infill no support, no brim
Couples between openLOCK and Dungeonstick
Pegboard Hook für 7x Schraubendreher bei metrischen Lochwänden Halter übernommen von: https://www.thingiverse.com/thing:4697784 Idee von https://www.thingiverse.com/thing:1240992 , aber komplett neu in Tinkercad erstellt Lochdurchschnitt…
Note: SpoolBearing3.stl is the best working model, however my first version required hammering the 608 bearing in, so I have renamed it to "Tight-Bearing-Fit" and made a new version that is "Less-Tight-Bearing-Fit" so you can choose what…
OpenScad script for a cable support. Customizable. Print in TPU so that it is all bendy as God intended.
bed 60 nozzle 210 speed 50 layer 0.2
Yet another vice! I see a lot of vices on this website. However, they almost all have something in common. The clamping axis is high and just below the jaws. Other than that, some of them have a short reach. And otherwise, the structural…
Pegboard Hook für 6x kleine Schraubendreher bei metrischen Lochwänden Halter übernommen von: https://www.thingiverse.com/thing:4697784 stl von https://www.thingiverse.com/thing:1240992 Lochdurchschnitt = 4 mm Lochabstand = 1,5 cm bzw. 3…
Part of the complete Zelda Key collection comes the Big Key from A Link Between Worlds! Make sure to print the connection blocks .5-1% smaller than the rest of the model.
Print in PCTG / ABS / ASA. For best results print in provided orientation.
This part was initially designed for my ‘ PluGuard Extensible Collection ’ and can of course be used for other purposes, to measure a gap / space between 2 parts Simply slide the gauge between 2 objects, like on the animation, between…
Used during LAN-parties. Place switches between tables. See also my power distribution box and LAN-party cable management .
Made to work with the gap fill https://www.printables.com/model/918559-creality-k1-k1c-lid-gap-fill-top-cover-hole-close/remixes
UPDATED Aug. 2, 2025 - Uploaded new board tray pieces that now include a more generous gap. If you were having trouble fitting your board into the first print, you can print those 2 new pieces and it should fix your issues. Apologies, and…
This is an organizer for the boardgame Between two Cities and the expansion Capitals. It supports sleeved cards and vertical storage. Print one of each and sort it as shown in the picture. Let me know if you have any questions or…
The original is great for going through shelves or a desk top. I needed it a little longer.
Simple version for my need. A higrometer on Joe Cooper's awesome work
This is another ‘because I could’ project. There are a lot quicker ways to accomplish what I was trying to do, but I have 3D printers AND I like things to look nice and neat too. So, I present to you my ‘Between Stud Shelf Brackets’. Each…
I made this to use an m12 screw instead of an m16 screw as a counterweight. The model had a printed thread included for m16 so i decided to make this adapter with openscad. Then i pregenerated all the common screw sizes using a batch…
![Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.](https://media.printables.com/media/prints/1108868/images/8378877_56cbc877-f33b-4c54-9190-9f20b125a5dc_f708f62b-26d7-4a66-a02a-6a56b3b9d8ee/divider-render.png)
