Counting matching models…
Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…
Hi, this toy is tiny (19 x 32 x 3 (3.5) mm) and has a 3.5 mm hole on one side so that you can add it to your keychain. The switch in the middle has two positions, when you push the switch in upwards it snaps into its new position. If you…
Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
Summary This bistable switch is an example of a compliant mechanism with a four-bar mechanism pseudo-rigid-body model. A contact force is created by causing the contacts to connect before the second stable equilibrium position is reached.…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
As suggested from the audience, it seems what i made remix of some remix of THIS GREAT Model ! So take a look there too - maybe you'll find something more suitable there!!)) But please note that I did not steal that model. As a prototype,…
You will need to lead in the cartridge. The file contains 5 pens.
Summary This bistable compliant mechanism was developed by the BYU Compliant Mechanisms Research group (compliantmechanisms.byu.edu). This model shows the bistable behavior that can be achieved by using a single print compliant mechanism.…
Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…
Full credit: these remixes are based on a Brigham Young University Compliant Mechanisms Research (BYU_CMR) Group design posted on Thingiverse . Check out their user page on Thingiverse or their webpage for other great compliant mechanism…
Hello this is a bistable robot gripper. It was one of the first 3d printing projects I startet after I bought my 3d printer. When the gripper is not activated, it is always open. When actuated, it closes and remains closed until it is…
This design is a LEGO-compatible bistable compliant mechanism. The center shuttle passes to a stable equilibrium point, resulting in bistable behavior. This model shows the bistable behavior that can be achieved by using a single-print…
Labists ET4 firmware!! Was a pain to find, had to go to Facebook and message a support guy. So here it is!! https://drive.google.com/file/d/1wXhCY1h7tXundF53bnfL9ESNWKrbd4Bc/view?usp=sharing Category: 3D Printer Accessories
Click-click-click all day long on the chaise longue. The world doesn't really need another fidget toy, but hey, it's only 2 grams. Print in PLA using a 0.4mm line width. Insert the inner piece into the outer piece. Position the inner…
I designed this bistable spinner inspired by bistable auxetic structures. It expands and collapses with a crisp, clean snap, feels great in the hand, and makes an excellent fidget. I enjoy multi-colour printing, but my AMS (Bambu’s…
I was looking at a modular bin system for my medication organizer and used it as inspiration to make a tackle box. Each row has 5 bays, and each bin can take up a single bay or multiple bays to hold more. Each bin has a bi-stable lid…
Remix der Gechenkbox von @PascalLascap_240 https://www.printables.com/model/436819-duplo-box-du-bist-toll Ich habe folegdne Änderungen vorgenommen: Box & Deckel haben nun abgerundete Ecken Loch um 2mm nach Links verschoben Schriftart…
I created this model as a tribute to Czech design and architecture. This lidded container was originally designed in 1911 by the great Czech architect Pavel Janák. The box is suitable as a decoration or as a container for wrapped sugar…
Gemacht für die Duplos aus der 10er Packung Ich selbst drucke die Boxen mit dem Bambu Lab P1P + AMS Der Duplo liegt leicht angewinkelt in der Box so das dass "DU" Perfekt sichtbar ist. Du möchtest die Duplo Boxen verkaufen? Dann schreib…
Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…
This is a remix of this model What I modified: Top Mod (see images): From Top.3mf Added the carved path of the arm Reduced the lower part to avoid scratching with the Arm Bottom Mod (see image) : From Bottom.3mf Added the carved path of…
Only works: With DRY (!) TPU95 - only TPU 95! With the provided print settings In 90% of cases (not all TPU 95A filaments are the same) Print settings: Wall Generator: Arachne Layer height: 0.192mm (leads to 2.3mm total height, which is…
Really liked the Cubistand model from sdmc (Thingiverse origination), but needed it to be Gridfinity compliant. Slapped it on a 2x2 Gridfinity bin base and removed the embossed text to increase print success and now it can be added to my…
This is a bistable enclosure lift mechanism for the RatRig V-Core 3. It keeps the lid closed when you close it and keeps it open when you open it. This lever arm mechanism changes the mechanical advantage provided to the gas struts as the…
Another type of compliant design that is “bistable auxetic”. Decided to try make a 3d printable design out of it. It has a very cool pattern to it. Credit to Steve Mould on explaining this design.
Non destructive modification for Lubitel 166B camera to turn it into instant camera. Uses Instax square cartridges. Check notes for each file. Except a few files, all should be printed without supports. Use at least 3 walls and 20%…
compliant mechanism with two end positions
Cut off the lowest layers in PrusaSlicer to create a flat surface for the ring to sit on. With PLA it printed without a brim just fine. The walls of the ring are thin so it is very comfortable to wear.
A simple fidget toy in a form of togglable, bistable switch with a built-in spring. The 2 available models have different spring forces. Designed for 0.5mm line width and 0.5mm clearances, but should work with a 0.4mm nozzle just fine. It…
Bistro folding chair and table Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
STL: https://cults3d.com/en/3d-model/jewelry/cubistic-bow-tie
It was designed in reference to the Czech cubism, avant-garde art movement. The vase crystallised into sharp points and slicing planes. By carrying its own energy which is released by splitting the horizontal and vertical surfaces that…
This is a modified Version of the X-Belt Tensioner designed from “Misterguru” on thingiverse. The edge of the base body, which is in contact with the sheet metal, was moved by 20.3mm. In addition, an additional edge has been added to the…
It's supposed to be a printable version of the thing in Steve Mould's video: Self-assembling material pops into 3D The paper by Tian Chen and colleagues is: Bistable auxetic surface structures, ACM Transactions on Graphics (TOG), 40(4),…
Simple bracket for a curtain rod that can be glued or screwed in place. If you need different sizes or distances, just let me know. See: https://www.kaufland.de/product/315528404/ or: https://www.bestlivings.de/Cafehausstangen
This is a file to generate cubistand style pen/brush holder models that are on standard gridfinity bases. To use, place inside the main folder of the rebuilt openscad library attributed, and customize the parameters.
Primitive key hooks designed in cubism style. Distance between holes is 25,5cm. Remix features: hopefully better design increased spacing to accomodate more keys and Vw group car keys 1 mm wider hooks for more sturdiness original .ipt…
Meet the kawaii stackable boxes, where cuteness meets clever storage! Inside, you'll find two hidden compartments: one neatly concealed in the lid, and another cleverly disguised as a fake bottom that lifts up. You can also add sorting…
Modified the original Thing to suit the Labists ET4. The bed on the Labists ET4 has the wires soldered direct to the heated bed but the cable management is rubbish and likes to wrap around the Y endstop. How to fit: Thanks to Penguin…
mug with devils tail Print instructions print in PET 100% fill is best for mugs. I have not test printed this so please leave me feedback
A struggle to keep your bowties well-arranged? An accessory for every gentlemen's closet. Design refers to the avant-garde art movement Czech CUBISM. • Holder for 5 bow ties. STL:…
Deckel mit der Aufschrift: Du bist die beste OMA
Summary As the name implies, the bistable-to-monostable hinge is derived from a bistable hinge termed the "simple bistable" hinge (ASME IDETC publication will be posted soon). The hinge belongs to genre of hinges capable of folding 180…
Remixed fidget click with rounded sides for holding comfort
Maceta en forma de cubo. Recomendaciones: Material: PETg o ABS (si se situará en el exterior) Chasis: Relleno 40% - sin soporte Maceta: totalmente sólida (max. paredes y max. superior e inferior) - sin soporte Maceta central: totalmente…
Auf der Platte steht Du bist die/der Beste! In die Schachtel kann man ein Duplo reinlegen und es dann verschenken.
Older versions were less robust and could only run 40-50 cycles in PLA. However, this version is all hinged and runs over 110000 cycles in PLA. +Nov 24,2020 I made stepv2 to make the motion smoother. +Dec 3, 2020 Added a shaft that can be…
🛠 Diseñado para quienes buscan precisión, funcionalidad y estética en su mesa de trabajo. Este bisturí modular ha sido cuidadosamente diseñado y probado para ofrecer un agarre firme, una cuchilla segura y una estética profesional.…
Relay Module 12V with Touch Bistable Switch CASE https://www.ebay.com/itm/12V-1-Channel-Latching-Relay-Module-with-Touch-Bistable-Schalter-MCU-Control-AHS/302955632744?hash=item4689901868:g:lXoAAOSw9itZmCcZ Print instructions Category:…
BYU BiStable 50% - Remix Prints at 50% size of Original MonoStable or add Preload Bar for BiStable mode. Mechanical 1bit memory w reset. Design is very durable and won't break from normal use. This design does not scale so I have added…
This is a replacement for the plastic ring that tends to break on Bodum Bistro grinder. The ring is press fit to the conical burr; better than original ;). After assembling the two parts, make sure to press these down into the grinder…
Primitive key hooks designed in cubism style. Distance between holes is 25,5cm.
A cucoloris ("cookie" because it's hard to pronounce) is a flat object that's designed to break up the light. Unlike a gobo, it's not in the middle of a lens assembly, so it's going to make diffuse and soft shadows instead of hard-edged…
Hang Christmas or bistro-style lights along the upper edge of a block wall fence without drilling holes in the wall. For block walls 4" (~100mm) to 6" (~150mm) deep, print one Front and one Rear part each. For block walls from 6" (~150mm)…
The cover and the base can be printed at the same time even with color changes.
For a full guide on how to upgrade your ET4 to Klipper firmware, see https://github.com/PhilippMolitor/labists-anet-et4-klipper-guide This Kit allows you to remove the built-in display of the ET4 printer and replace it with a bezel that…
After 3 weeks in the original RatRig config 1 of my struts ripped. So i order new ones and print the Lid Mod from ZEBaker98 ( V-Core 3 Bistable Enclosure Lift ) Than i saw that the mountings are get bending to hell because the Lid is way…
Only the seat part. Must be supported with a firm construction. Best is to use steel rods for the supporting ring. Steel rods are bent into legs.
Deckel für Duplo Box : Du bist der beste Opa
Flick through your photos in an instant. Repeatable and fun, this is the way to pick your favorite photos and fidget at the same time. Holds 5 photos in any orientation. The stand mounts using m2 screws which hide in the base when fully…
Nozzle 0.4 and 20% infill is sufficient for reliability. Nozzle 0.2 for more detailed logo.
I used #Damien Sacher(https://www.printables.com/model/5564) model and altered. Amendment: Only the inside of the box has been changed to two scalpel units. The size of the magnets has also been changed to 5mm. Note: The first model came…
I removed the Fillet and added a Chamfer instead for better printability. I also removed the holes for the nuts and added on one of the parts the holes for M4x8.1 threaded inserts by ruthex.
Factory original nozzle, printed in white filament in my photos. The one I designed and printed is red. I printed it on the SX1!
PLA is not the best choice if the pot is to last longer.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Set of six miniature 1:12 scale bistro and café tables…
What's this for? Designed to keep your Bodum Electric Kettle and heating element together nicely. Optionally you can use my Cabbly Cuddy cord winder that I scaled to 100mm to match the kettle diameter to tidy up the cable when stored.…
Powered by Make My Statue from MakerWorld ( https://makerworld.com/makerlab/makeMyStatue ) Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
This is one of my favorite vase designs. This vase cannot be printed in vase mode. The presliced gcode is 180mm x 180x 60mm. The overhangs can be challanging but the presliced model has enough support material. I dont recomend removing…
I printed this in Devil Design Orange PETG 13% Infill - Gyroid to be a little Elastic 4 Perimeters (3.32mm) To have Strength 4 Bottom Layers 3 Top Layers 0.2 Layer height 0.3 First layer 0.4 Nozzle Its @ 2H print on this Setup 60mm/s…
“when your legs don't work like they used to, before”. Dining chair BISTRUP sand/oak. Usually brought from JYSK. When the old feet wear out, they are easy to replace. 13.3mm cylinder with 20.4mm sphere to match any angle. Easy to print…
I converted my Anet ET4 to a Switchwire ET4. Here are the mountingbrakets for the skr pico, and the mosfetboards. I used the original mountingholes in the ET4 Case. Printed in PETG with 0.2 layerheight. The screwholes are modeled, so no…
J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…
Minimalistic holder for three pairs of glasses. For some glasses (see photo) necessary to have them backwards, but to me is no problem with that. Designed to be sticked to door / cabinet / with decent two sided tape (not that one for…
Powered by Make My Statue from MakerWorld ( https://makerworld.com/makerlab/makeMyStatue ) Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
❤ If you have questions or like this print, consider leaving a like, comment or a make. Thank you! ❤ A customizable holder remix designed for pens, paint brush and many more things. I exposed many more variables in the SCAD file to play…
A mount for a labists raspberry pi in its case. I moved the hook to the side and duplicated it so that I could use the center USB ports. The stabilizer clip is exactly the same as the original. Print Settings Printer Brand: Monoprice…
Be prepared to do a lot of folding. There are small tabs to help locate and glue the seams.
boite bistouri pour mètre les lame de rechange ou autre rectification des erreur de fichier
This is an origami-inspired square structure that is stable in multiple orientations. It prints as a flat sheet with creases to assist in folding. See the attached instruction PDF for the orientation of folds. Printed on Elegoo Carbon…
Remix from cubistand paint brush holder because I don't need too much space for the holder. Please kindly note, the measurement is not the same as the original version, I just design the model to look like that holder so this is not…
Replacement retainer clip for Bodum's Bistro Food/Meat Grinder Attachment. I recommend changing in your slicer the wall printing order to "Outside to Inside" for a more precise size in such a small piece. Printed in PETG, had to lower the…
Design Version 1: Aktuell noch in PLA, ist nicht optimal für die Verwendung im Freien! @Der Fuss ist so konstruiert, dass dieser auf der Unterseite auf dem Boden aufliegt und so eine grössere Auflage hat. @Rohr Aussendurchmesser 20mm.…
Eine Deckelsicherung gegen Rausfallen für den Bodum 1870-01 Teebereiter Bistro Nouveau Erhältlich z.B.: * https://www.bodum.com/de/de/1870-01-bistro-nouveau (Bodum) *…
make your printer look very good
Made from 3 parts. Snap fit the compliant arm to the tomb wall and the stone and set on a table to acuate the bistable mechanism to open and close the tomb!
Here is the original text from the thingiverse page: Semplice sistema di ventilazione per ventola 5015 installabile su Easythreed / Labists X1. Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
Hodiny použitelné pro pauzu na zaměstnance ve stánku / bistru / prodejně
Model glumca Dragomira Bojanića Gidre. A bust of serbian actor Dragomir Bojanić Gidra.
Simple bistable compliant mechanism. Best printed in PETG. It needs to be worked back and forth a few times right off the bed to break in, after which it becomes pretty snappy.
Un bisturí decorativo modelado con gran nivel de detalle, ideal para impresión 3D . Puede emplearse como complemento en dioramas, recreaciones médicas o proyectos educativos.
Variations Clam Case 1x6 (Front Orientation) Clam Case 1x7 (Front Orientation) Clam Case 2x6 (Front Orientation) Clam Case 2x6 (Side Orientation) Both tackle boxes have rounded corners versions to reduce sharp edges but if you would like…
Maximise for strength. Print it solid. small layer height. Durable material (at least PETG). Slow printing time. You can mirror it in the slicer.
Finally an actually satisfying 3D printed switch fidget! No crunchy and screeching 3D printed springs here! This bistable switch uses a pen spring to provide a nice click between positions, albeit with some assembly required. The switch…
PLA 0.2 - 2 Capas - 15% Relleno Imprimir apoyado sobre cara plana y agregar soportes ajustados - Separación superior 0.2165
