Counting matching models…
I use this case as a sensor box for ESP32 Wemos D1 from AZDelivery with an BMP280 sensor. Wemos itself has no screws so its laying just inside. The distance between the holes is 10mm, which seems to be suitable for many types of sensors.…
BMP-2 Tank Model Scale 1:72 The turret is designed to rotate using a bearing mechanism, adding functionality to the display. Assembly requires gluing the parts together for a secure fit. The model includes separate black tracks and a…
This is 1:100 scale model. -İf you want 1:72 scale, adjust size of parts to 138.88% -İf you want 1:56 scale (28mm), adjust size of parts to 178.57% -Print with 20% infill Supports: Yes, on build plate only! use glue to attach the turret…
Design I bought a couple of AHT80+BMP280 sensor boards from AliExpress to play around with Smart Home stuff. There was however no suitable case to protect the sensors from dust and accidental damage, so I designed one. The design assumes…
This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is a generic BMP-1, most often used…
This is a tiny case for a XIAO esp32c3 board with room for the wifi antenna and a AHT20 + BMP280 sensorboard (Ali). the pcb's are held in place with a clamp and can easely be installed and removed. the case back snaps to the top without…
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
This is a box for ESP8266 30pin+BME280 temp, humidity and pressure sensor. Easy to assembly, just slize in the lid.
Sun hood designed for the Blackmagic Pocket Cinema 4K with the Smallrig 2343 Universal SSD Holder mounted on top, using one of the side ¼" threads on the Smallrig holder as the mounting point. I designed this using a 3D Scan of the back…
Sun Hood and Viewfinder for Blackmagic Design Pocket Cinema Camera 4K & 6K I've made two versions of the Sun Hood. Both designs use a hinge to tilt up the Sun Hood and easily access the touch screen of the camera. -80mm mini Sun Hood…
Cover for BME280/BMP180/Si7021 sensors, with labels of pinout Category: Electronics
Small cover for BME280 and BMP180. For outside use, PETG/ABS/ASA is preferred. Recommended settings: 4 perimeters 0% infill
…Please be sure to hit like & post a make, I'd love to see your prints! Install your BMP/BME280 sensor on any V-slot. Or use base with no mount for glue on application. Measure temperature, pressure & humidity on your Rpi. You'll need: 1x…
One shortcoming of the Sensorbox v2 is the placement of the AHT20+BMP280. When placed in it's intended location on the PCB, it measures temperatures significantly higher than ambient, also throwing of humidity measurements. This part is…
Upgraded fan bracket for Sovol SV04 and SV01 Pro using the EBMPapst RLF35-8/14N. Highly recommend printing in at least ABS/ASA.
A 15mm rod mount to attach neatly and compactly to a Tilta BMPCC OG camera cage. Requires two m3 heatset inserts as well as two m3 10mm countersunk screws. I would recommend printing this out of a very stiff filament like CF-PLA or PCCF.
Remix of a temperature+pressure+humidity sensor mount dedicated for Sensorbox v2. Mounting horizontally with sensor facing downwards should yield the best possible accuracy due to natural convection. That's also how Air Gradient has its…
whell axis 2 mm track - 1 mm gun - 1 mm Category: Toy & Game Accessories
Box for temperature sensor based on ESP32 with BMP388 and with one 18650 battery. Code included. Data is uploaded 1x per 5 minutes to the tmep.cz server. For this project you need: 1x 18650 battery. I used LG MH1. 1x Lolin D32 ESP32…
Print with 100% infill and have fun!
I reuse a case for ESP8266 D1 mini module from @seraphx2 to include a housing for BMP8266. This is only the top cover. For base see the link. https://www.printables.com/cs/social/320359-seraphx2/about
It is difficult to install a heavy manual lens on the DJI RS3 pro without support. I made my own version for Mike prime lenses and BMPCC 6k pro camera. Lens part - the original lens support that came with the lens or this model…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here!
I needed to support my speedbooster Viltrox EF-M2 working together with BMPCC4k (Black Magic Pocket Cinema Camera 4k) in Tilta cage and Sigma 18-35 lens. Unfortunately Smallrig Lens Adapter Support for BMPCC 4K Cage 2769 is not available…
Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. The XLR connector is sadly covered, but the AC connector is still…
Just bought a new BMPCC because the HDMI broke on the last one. Wanted to make sure that didn't happen again, but didn't want to shell out for a new case. Probably not too useful unless you have: D Focus Cage http://amzn.to/2zJahdE Hdmi…
NOTE: New version here: https://www.printables.com/model/967009 Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. Print…
A model of mine developed out of necessity. This adapts the chassis of the Bergara BMP to take a full length 12" Arca Rail. Rail used:…
The perfect BH1750 sensor housing for use with Flipper Zero. The housing has holes and does not interfere with the sensor. Spacers are designed to be installed between the breadboard and the module. Small and compact. You can make this…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BMP-series Infantry Fighting Vehicle - at…
BMP-3 tank is a scale military armored vehicle model stl and 3d printable tank file, made for diorama and collection display. This 3d model is ideal for war game scenery, tabletop wargaming terrain, and historical vehicle builds where you…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
LaskaKit Outdoor Meteo THP Senzor SHT40 + BMP280 3D model modulu s čidly SHT40 pro měření teploty a vlhkosti a BMP280 pro měření tlaku. Deska má ochranou masku pro venkovní použití. Stránka produktu:…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
An artistic sculpture. It could be wall decor, a sci-fi prop, a terrain prop, or an artistic shelf model. This model was NOT created with any use of AI. It is designed to print without supports. If you collect or download, please "Like".…
There are plenty of these available but my design holds the module tightly inside the housing. In addition, the single screw hole is through and through so it's possible to use the same M3 bolt to hold the housing together and secure it…
Pretty simple. and if it fits a little loose, a dab of clear silicone works well.
Fasten M2x6 screw M3x8 screw And M3 T-nut Configuration [temperature_sensor Corner] sensor_type: BME280 # BMP388 i2c_address: 119 i2c_software_scl_pin: PA8 i2c_software_sda_pin: PC9
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Ever since I bought my 3D printer, I've been planning to design a custom enclosure for this device. Until now, the wires were just a mess, constantly getting caught on things or coming loose, which caused reliability issues. I finally…
I recently found out the LCD screen on one of my OG’s was damaged in transport and is now bruised. Well, I won’t let that happen to my other OG. I designed this screen cap. You can add the magnets and it attaches to the Kinotehnik frame…
FAN - EBMPAPST 4314 SPIRO - 130mm
(Update 5/24/26 - An insert for a 1/4" - 20 nut has been added to the adapter mounting hole) A bracket for mounting a SmallRig NP-F battery adaptor (Or any battery adaptor with a 1/4"-20 screw) to a SmallRig BMPCC 4K cage. There are two…
Ventilated, support-free enclosure for a DIY weather station living inside a Stevenson screen. The ESP32-C3 Super Mini and the LM393 rain-sensor controller sit side by side in the main box; the AHT20 and BMP280 live in two separate…
Blackmagic Pocket Cinema Camera 6k internal mod This is a piece to replace the original flange thing on the first-gen BMPCC 6k. Problem: The original piece is too thick and interferes with some lenses that have a large rear protrusion. I…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BMP-series Infantry Fighting Vehicle - at…
Ever since I bought my 3D printer, I've been planning to design a custom enclosure for this device. Until now, the wires were just a mess, constantly getting caught on things or coming loose, which caused reliability issues. I finally…
There are plenty of these available but my design holds the module tightly inside the housing. In addition, the single screw hole is through and through so it's possible to use the same M3 bolt to hold the housing together and secure it…
NOTE: New version here: https://www.printables.com/model/967009 Shields the USB-cable from impact and movement which may damage the fragile USB-C connector on the BMPCC 4K electronics board. Only suitable for angled USB connectors. Print…
You also need M3x8 SHCS + M3 Hammer Head T-nut + BMP180 (5pin).
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
