Counting matching models…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
Holds up to 4 standard breadboards on your HSW, so that they are easy so acsess at all times.
Marble Run Remixed from the awesome design of FlyingPurpleCow I made some new elements. I'll probably add some more. The mounting peg is ten-sided so you can get about 6 different usable angles and hold snuggly to the peg board. You add…
A large half pipe for fingerboards. A large half pipe for fingerboards.
Nice snug fit compared to generic screwdriver holders. Works with LTT Precision Screwdriver. Linus Tech Tips Screwdriver. Modified from Mikhail design to work with Multiboard.
This game can be played multiple ways. There are different sized pegs with numbers on them. Players take turns adding pegs to the board, or stacking them on other pegs. Game Variations: 1 - Multi-round high score challenge RULES: Take…
print with tree suport (i recommend using 3 to 4 walls, a brim and 75% infill with PETG to be strong and not breaking while removing support)
I designed them so there is enough clearence between the tool and the Multiboard tile for your hand to grab it. I needed 4 different versions. Differences are in the hook diameter, and the distance from the center of the hook circle and…
Since one of the supports for the Rummy game board broke, I quickly made a replacement. It's not identical to the original, but it can be used alongside it without any issues. For those who prefer perfection, use two printed supports on a…
This uses the Lite Multipoint Rails and requires at least two Lite Multipoint connectors. I use these . Prints without supports using the typical Multiboard settings. Step and Fusion 360 files included.
Interactive Learning Board for Toddlers These models allow you to source a plywood board from local builders shop and build an interactive board for your little ones - so they learn to tie a shoe, recognize shapes and fit them in, use…
Enclosure for Framework Mainboards with the internals displayed on the outside. I really like the minimalistic case for the bare Mainboard PCB as a full PC. But to make it more fun I added the shape of the mainboard onto the surface. So…
You ever get one of those small 400 pin breadboards, and just feel awkward with it because of how small it is? Well, with this base, it's harder to lose the little guy, as well as it serves as a nice platform to just hold it down and work…
Use with care ask any questions you want to ask and I will answer asap
This is a little chassis designed to make it a little easier to mock up and test your guitar effects circuits.
Mini Bluetooth Keyboard Holder attach with poster command strips, a screw or both. 61mm x 9.5mm Bluetooth Mini Keyboard. No supports needed, print as pictured.
This is a shelf I made for myself to set my Ego Charger on to free up space on my toolbox. I had multiple people ask about it and I didn't save it so I recreated it in a few different variations to save time and material.
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
Orientation: Print on side (for maximum strength and to avoid supports). Material: PLA. Infill: 15% (Grid or Gyroid recommended). Supports: None required.
Description I made these boxes to store cards for the splendid "Nat's what I reckon - YEAH NAH board game, but they are easily adapted to suit any other game. You can find files for the game TOKENS on the attached .3mf file or download…
its a 4090 case for a framework mainboard computer case i would love to win the competition i modeled the make body of the 4090
This Number Learning Magnet Board includes Number Tiles from 0 to 9 and a Base where a child learns to place all the numbers in the correct spot. The Number Tiles show the digits from 0 to 9, while the Base shows the text version in…
This is a updated enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws into place. I made it to house my WLED controllers. It has wire guides around it also and a screw in place clamp if needed
Eigene Version des Framework Computer Mainboard Gehäuse
DESIGN This 3D printed model features two elegant sailboats, designed to capture the beauty of sailing at sunset. The sleek and modern design is crafted to mimic the graceful lines and movement of real sailboats. USE Ideal for nautical…
Two simple adapters (straight & 45°) to connect standard plotter cardboard tubes. Perfect for upcycling and crafting. They fit snugly into common plotter tubes. Just print, insert, and start building.
This was my first attempt at making/remixing anything, so any feedback would be appreciated. I've had zero issues printing this using the following- Material: PLA+/PETG (I used sunlu petg) Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15%…
Loosely inspired by the Apple Cube USB Charger Bracket , this is a mount for a 5V A1 USB power supply ( this one at Adafruit and a tiny breadboard . There is a small cubby between the breadboard mount and power supply to stuff a short USB…
The handle will require supports, as it's best to print horizontally. I recommend a higher infill on the bit as well. Any layer thickness works. @JudahChang_579681 Cardboard Screws are the best I've used.
Have you every wanted to sit on a nautical themed boaty just relaxing as you shoot mortars out into the bay? Well ask no more, now you can! Category: 3D Printing Tests
Need an easy to obtain case for your Google Coral Board, then use this.
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
Welcome to the Real World. A Matrix-themed enclosure designed specifically for the Synaptics Coralboard SL. Clean. Functional. Cyberpunk. Featuring a design inspired by digital rain and the iconic Matrix aesthetic, this case protects your…
Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
Designed to help with soldering for the TRRS 3.5mm jack motherboard. Made to help with build a Variable Openmod Part 3. This is a tool to help soldering 3 wires into one for ground. And a tool to help hold wires when soldering into a TRRS…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
These are standoffs for the Bauer Lite keyboard. I used a thin 3M VHB tape to apply with 10mm rubber feet at the bottom. Photo is clear PETG -
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
Discover our 3D-printed chessboard with embedded magnets—a perfect blend of modern technology and classic strategy. This sleek, durable board features magnets that keep pieces securely in place, ensuring a stable and uninterrupted game.…
Mount 3 Ryobi 18v batteries to wall control pegboard using the DDD Printable Wall Control System . Note: If you use the center piece to combine two of these together, the middle batteries will be rubbing together a bit. They fit, but it…
I made this because my son temporarily lost the handle to my keyboard brush that I use for lots of things (great for cleaning electric shaver). Printed with a brim, no supports, uses around 15g.
Pegboard hook. Designed to print well, the shape is octogonal. There is also a clip that is supposed to help keep it in the pegboard. Designed for US pegboard, perhaps European pegboard may have different hole size or spacing. Medium and…
This is a holder for an IEM (in-ear monitor) that attaches to a pegboard. It has a hook for hanging the IEM. The holder is designed to keep the IEM in place when not in use, and to protect it from damage.
Realistic old style boat with paddles - easy to print and assamble. For assemble you need just some glue you are comfortable with. Supports are needed just on flat base ring where floor sits and that's it. You can tweak weight…
Printed these upside down using 0.4 mm nozzle with PETG and PLA. The (TPU) seal goes in the lid. Use a 5" hole saw to install. Added cover with webbing for installation require higher weight load. Added blank cover with no finger holds.
This is a motherboard mound for the Milo 1.5 with the same exact spacing as the LDO kit fly board comes with. You can keep the t-nuts in the same exact location. Small 3m heat inset from the back. Opening is 5mm for the heat insert
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
I love the split flap clock by AlexY, and the beautiful case for it by Jacob Lightfoot, so I designed this shelf so I could attach it to a pegboard. I printed it in ABS, PLA would probably be fine but the clock has some weight to it so I…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Good day, dear friend. You can find two versions of the tray. In version 2.0, the destruction and sick people chips are combined with the sick people figures, I found it more convenient. But there is also a place for the destruction and…
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
Remix of @wizzo TapTo case to fit the smaller module available on sites like AliExpress
Beware: this insert has couple of limitations, I mostly made it for myself, but I thought someone else might find it useful as well. All the available inserts either ditch the game board in favour of the playmat or were designed for the…
Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…
In the original design of this holder, the tool is held with the center of gravity much higher than the top of the model. This forced the top of the handle (as seen in the picture) to be unstable and tip outward (not shown in the…
4x m3x8mm (or 6mm) screws are used. The screws go directly into the plastic (modelled as 2.9mm holes). FreeCAD and Step files are available if anyone wants to modify it, e.g. add heat-set inserts. Stand consists of two feet, so print file…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
A Multiboard dual snap that allows you to create 90° corner tile multiboards without using brackets. This minimizes filament use and space required (can be placed on tight corners, walls etc). Also keeps the tiles available for other…
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
Customized with Dungeons and Dragons logo on it. Print as it is with supports.
I have only ever found Skadis board options, so I wanted to created a custom holder that supports standard 1in x 1in pegboard. This holds a single bottle of 4oz SuperLube. For printing I chose: .20mm Standard Seam position: Back Sparse…
Add these decorative traction boards to your Traxxas TRX4 rig for some instant credibility. Look great printed in orange, but could be really cool in red too.
This is designed to be printed upright. Material : PETG (PLA snapped on first attempt Infill : 40% Layer Heigh : 15 microns
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 50 x 50 holes.
I wanted a simple and low profile universal, screwable mount that allowed for a quick release. I embedded a simple 45° french cleat. Print the peg board mounting portion with support and the pegs standing vertical. You can split parts in…
Cardboard shipping tube lid Models: Simple lids for closing cardboard transport tubes. The lids are available in two sizes, for rolls with an inner diameter of 40mm and 99mm. The size can be adjusted with scaling in the slicer. For…
Printed with PLA, 2 perimeters and 15% infill. There is a hole in the bottom of the bits pockets so some other stuff fits better. The electrical screwdriver is a Chinese one (looks very similar to Amazons own brand)…
For 3D printing nerds, hobbyists, and modern naval enthusiasts alike! The result of a quick weekend project, this model was inspired by the famous 3D Benchy, along with a fun facebook game from my childhood. The Aquitaine class is the…
The Minimal Mainboard Enclosure, when you want *just enough* protection for the mainboard from your Framework 13. Features Include: 2 Framework expansion module mounts. Locking clips included to make sure you don't rip out a port while…
Designed to speed setup and allow both horizontal and vertical storage. Sleeved cards are supported (I used Arcane Tinman Matte) and all 6 player boards plus rule books can be stored with minimal to no lid lift. Tokens are split into…
Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
Inspired by the kickstarter project, but I didn't want to pay for it, so I designed one myself Printer: PRUSA MK4S Layer 0.25 Structural Infill 15% Printed with PETG
This dashboard uses 12mm dice and the included markers to track everything you need for your Chain of Command games. Dashboards and markers for Axis, Allies, Russians, British. This model was made by SgtShellback on Thingiverse and is…
Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf
the additional cover for the motherboard housing created when the motherboard is removed from the printer
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
Recommend splitting board in half to fit Mk3s+ (similar) print-bed otherwise okay to keep intact. Designed slide top boxes to print without supports. once completed should be a snug fit in box and should (mine does) fit with the sleeves…
Here is a 3D printed base for three MB-102 type breadboards (from Aliexpress). I designed it using Tinkercad. Print the base, face down. It measures approx. 20 x 18cm and can take about 15 hours with 15% infill at 0.2mm resolution if…
This holder is designed to hang a 1:10 scale RC car directly on an IKEA Skådis pegboard. The car hangs securely by its tires, with the holder optimized for tires with a diameter of 110 mm. Features: Compatibility : Fits RC cars with tires…
A quick and easy to print mount for your portable oscilloscope needs. Requires 2 of these flatheaded bolts to mount: 9MM small thread T bolt prints in orientation provided in file, no supports, standard multiboard settings.
a heavily altered version of Wrist rest v4 w/ fillets by CarterArris - Thingiverse , (alternate link: https://www.thingiverse.com/thing:4808839 ) which was loosely based on the 𝘿𝙚𝙡𝙩𝙖𝙃𝙪𝙗 𝘾𝙖𝙧𝙥𝙞𝙤. I modelled it so that it fitted my needs for…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
I needed a low-profile hanger for a small whiteboard. It uses a tapered edge offset from the wall to slip in between the cardboard backing and the border frame. You can use a small screw to attach the hanger to drywall, or a longer screw…
Cardboard is such a wonderful material for kids to create with! It is readily available, cheap, and safe. However, it can be very difficult to punch holes into cardboard - you can't use a normal hole punch and it is dangerous to try and…
This spacer supports the fins on a baseboard radiator. It fits on top of the struts that hold up the heating pipe and spreads the load across several fins.
File names give information on the tape measure the mount is designed for.
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
