Counting matching models…
This is a counter for board games. It has a geneva wheel so that the tens only increase/decrease for every full revolution of the ones. No painting is required as the number wheels are printed with a color change. It comes with a blank…
Update 2026.10.28: Added a "V2" folder to make the insert compatible with the "Underworld" expansion. The challenge is to fit the small fabric bag inside without adding a lid lift. Any ideas ? ^_^ Todo: Complete the documentation. For…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…
I did some small changes on the design by Qualith . I did not change the internal dimensions, so you can also use the Knobs from the original design . Additionally I created a frame, so you can use the ice breaking module with the raised…
Recommended to print with as small layer height as possible. Supports are needed for the pieces with big hats such as cowboy and sombrero.
A tray for the various tokens, dice and event cards (without sleeves) for the Awaken Realms boardgame “ISS Vanguard".
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
3 different types of train wagon for Ticket to Ride (boardgame), optimized for 3D printing.
The Insert is designed that everything stays in the box safely, but can be easily taken out and simply placed on the table. The box closes flush and has enough room the add felt glider to the player boards if you put them at the right…
Anno 1800 Redefined A few words I took inspiration from several existing Anno 1800 inserts. But some were not thought through to the end (e.g. a missing lid for the tiles) or were too wobbly and brittle for me. So I redesigned the insert.…
This is a card holder for the boardgame "ISS Vanguard" to be placed on the left top side of the Planetopia book.
This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion. There is plenty other inserts in thingiverse for this game, but this is why I prefer mine: All pieces are printable in a 210x250 bed. No gluing…
A lamp that casts a gaming board as a shadow. Chess, Ludo and Mills are available so far. Print instructions Everything was printed without supports and should easily come together with a nice fit. Notes on the light source: To get sharp…
This is a carefully curated remix to replace the cardboard standees in the hidden movement boardgame Beast ( https://boardgamegeek.com/boardgame/281549/beast ). If you're wanting Watchtowers for this game please check out my other remix…
Yet another kind of boardgame trays (to contain game elements like token while playing). This one : Is parametric (width, height, options activated or not, various radius, walls sizes, …) (source file is provided) Is especially designed…
Cheese replacement piece for Mice and Mystics boardgame. Gives a nice 3d feel to the cheese, and I don't like cardboard chits that much. This is a wax covered cheese wheel style, like some swiss or a gouda / edam We are going to paint…
This model is forked from Hogwarts express, but it has bigger chimney and much bigger control cabin. It was redrawn for my replica of Railroad Tycoon the Boardgame - player locomotives (20 mm length) and first player marker (the gold one,…
+++ Boardgame Award +++ Boardgames become more and more popular. So why not honor that with an award? Whether in your own playgroup or for official competitions. With the price, the chest swells after a win by at least twice as much. The…
A simple card and token holder in four different versions. card and token holder with 5 trays card and token holder with 4 trays card and token holder with 4 higher trays token holder with 4 higher trays Print Settings Printer brand:…
This is an insert for the Kickstarter version of the boardgame Earth by Inside Up Games. The insert is designed to hold all tokens and help aid in a quick setup and convenient access during play. This insert was not tested for vertical…
When playing that great game i was annoyed when i had to move the airport or altitude cards and they did not stay in line. So i designed a little Guide which adds no thickness to the game board to fit existing Inserts. The cards slide in…
This is actually a from-scratch design, but was inspired by the existing design by rrapnek. Since I have the Resistance expansion (adds the Inquisitor), my cards are around 20mm thick, so the 15mm cavity on the original design wasn't deep…
This is an insert / organizer for Covenant. As Devir is known for packing a lot of content in any game box they publish, this insert was more grown then designed to fit all the content in the box with no lid lift. The two-piece player…
UPDATE March 28th: The insert is working fine and I changed the status to final. Feel free to make and remix! Tips are appreciated. Looking forward to seeing the posts of your makes! UPDATE March 25th: The bonus tiles have been updated…
A topic that comes up regularly is table space for board games. Sometimes you can help yourself by adding a small table next to your gaming group - or storing needed pieces in a sub-optimal situation. Or only a little bit more room per…
I created these boxes using my parametric design , customizing the boxes with two different sizes (one large for the main LEGO pieces, several small ones for the cards and the remaining tokens and LEGO pieces). As a nice side effect, the…
I was displeased how patchwork is messy after opening box, so I designed new insert, with few things in mind: it is designed to print easy in 3 parts, and use minimal plastic amount while keeping functional design you can use button tray…
Simple and effective insert for Canvas board game. Board Game Geek Kickstarter Print instructions Print the insert twice and the box 6 times (for ribbons). Colors are up to you - I like to make the box color match the color of ribbons (as…
I got the Resident Evil 2 board game and one thing pretty immediately popped out at me: this thing needs better walls. So, I made a wall to replace the little cardboard wall overlays, except that those walls looked weird being the only 3D…
EN: Boardgame pieces for the Discworld: Ankh-Morpork These are faithful copies of wooden figures for a board game that no longer exists today, which expired due to the revoked license. If you need to replace a piece or would like to…
I took M1CK3Y's models and touched some of them up and redoing a few of them. https://www.thingiverse.com/thing:2897580 The fort was perfect. However, I needed to add some support squares to the university and the temple to avoid…
Accessoires de jeux de société, pour stocker vos tokens et petits éléments de jeux pendant une partie. Se range facilement grâce aux aimants au dessus et dessous. se maintiennent entre eux grâce aux aimants sur les cotés. En deux…
This is my take on an insert for Tiny Epic Pirates and the Curse of Amdiak expansion that holds sleeved cards . I am using Mayday Premium Sleeves for the Tiny Epic Series and Sleeve Kings Mini USA Card Sleeves for the small cards. Please…
I couldn't find a good adjustable spacer for the card games I play, so I made this. It screws together, and you can unscrew it to get more or less space out of it. I'm using it for Marvel Champions, but you could use it for any card game,…
Here is my organizer for the boargame 🪐🌍 Zenith🌍🪐 from Playpunk. The card tray and tokens holder are inspired from Maxou47's design. I however entirely designed the planets tray. I wanted to highlight the beauty of the planet tokens 🪐🌍…
This is a d100 die for you to play ttrpg games or others. The dice is not totally fair as that is impossible for 100 faces but I tried to make it as close as possible. I tried it and works fairly well. Print instructions: You should print…
The box contains 4 smaller trays. Two for all the game tokens and two for the energy tokens besides the aspect cards (easier management and no displaced tokens). Print: 1x “ebr_box_lid” 2x “ebr_ins1” 2x "ebr_ins2" Printed on Creality 6-SE…
Organizer for Pandemic board game. One tray with several compartments to fit all cubes, items and meeples. Easy to lift in/out of box. Card holder with or without slots in the back. Fits in original box if you remove the cardboard insert.…
Print 1x of the Middle, and 2x of Part A and Part B. I guess it works with the Kickstarter copy if you don't store the mat inside the box. Ideally you'd store the wedges so they cover both printed inserts, but it doesn't seem secure…
A basic insert to hold all pieces and cards (sleeved) for pandemic board game and all 3 expansions in the base game box. both prints fit together in the base of any of the pandemic boxes (base or expansion). the boards and instructions…
When I stored my board games in my Kallax squares, I disliked stacking them horizontally on top of each other and then always needing the bottom one, and I hated storing them vertically and then having the components scrambled inside of…
This is a remix of my Azul overlay, but for a laser cutter instead. It uses the same 3D printed pawn as the original, and 2 new small identical 3D printed clips to fasten it to the board. The clips are sized for 3mm plywood and 2.25mm…
Originally designed as a replacement for cardboard tokens in the game Farlight, they're great for any game that features astronauts, such as Arcs's agents. Update 01-14-2025: Added multicolor version Original size 18mm, but can easily be…
Insert for the base game Mycelia (possible expansion will not fit). Can be printed in 3 or 4 parts for printers with smaller beds. INSIDE dimensions of the Box. (my Box European/German) 253 x 253 x 75 mm. (9,96 x 9,96 x 2,95 in) To be…
Tower to easier identify spires. Holds lowest chip. Additional chips stack on top. Holder for market items. Ring to slightly lift chip-counters in mats for easier rotation. Half the thickness of the mats.
Replacement pieces for boardgame Boop. To play the game you'll need 16 kittens (8 each color) and 16 cats (8 each color) and a 6x6 grid board. Have fun!
Reuploading FranckygoestoHollywood's remix from Thingerverse. The insert is made for fitting both expansions into the box with a low plastic footprint. This doesn't fit sleeved cards
3 simple boxes with lid. I'm using nice Toy Battle markers, which can be stored in Starbox.
Both the 2x2 grid and 4 of the 1x1 tiles fit on a standard ~220mm printer bed
Boxes to remove the need for plastic bags to store and organize contents of Red Cathedral. The Red Cathedral | Board Game | BoardGameGeek Features: Separate resource tray so you can just set it on the table for play. Finger holes to…
I've finally had the chance to release my Gameboard Riser. For those that don't have the space or just need to raise up their board games a little higher to allow for beverages to be out of the way or cards or dice, etc... This is for…
Simple little standees for boardgames and prototyping. Three different versions are provided, with varying gaps: 0.2mm, for a thickness of one playing card or more 0.4mm, for a thickness of 2 playing cards or more 0.3mm, a happy medium —…
These are game inserts I designed so everything stays in the box safely, but can be easily taken out and simply placed on the table. Every player gets a simple box with everything needed to start - this drastically reduces setup time. The…
Love @Blackp0ison's version of Hive! Looks so good on the table. Loved it enough to want more pieces. So, I used the expansion bugs from @Ifs83's version to create this expansion set that matches the base game. Included are the "full"…
This is a remix of finnef's Gaia Project insert which is a remix of asuahsahua's insert . The original insert is great, but does not support sleeved cards. Many will say why do you need to sleeve the cards, you don't even shuffle them? If…
This is a custom set of inserts that I designed and printed for “The Thing” The Boardgame. This uses magnets to hold the lids on and will allow for every thing in the basegame, expansion and kickstarter addons to fit inside the base game…
Verdancy, thumb up, and pots tokens for Verdant board game.
Replacement wheel to print (one for each player) for the game Barrage. It's way more practical than the cardboard one. It's made by to pieces, pinched together by a pin (male + female) included. As you can see from the pictures, it's easy…
A simple insert for the Tribes Of The wind Board game. There is an optional spacer just for making the box to stay in place, if you can use something else, or you store your game horizontally you don't need that. Head over to github to…
Ever since Corona we've been playing so many boardgames at our house we decided to make it a competition in its own ... every game we play, the players can (should) put in a coin (poker chip). Winner of the game takes all the chips that…
Total storage solution for the awesome boardgame Stationfall. Designed to minimize setup and cleanup time and make for an overall better experience! Together with the gameboard, manuals and reference sheets it's a perfect fit and all…
This is a simple and lightwight insert for the boardgame Mycelia by Ravensburger (German/European version). To fit on the bed the top part can be diveded into two parts (as shown on the photos). The lids of the boxes consists of two parts…
Держатель планшета пришельцев и карт уязвимостей. Свободное место для карты - 49* 72 мм. По запросу могу добавить альтернативные версии планшета под нужный размер карт. Под размер карт в протекторах Pantheon Sleeves Poseidon Epic 45x68 .…
This is a complete token organizer for the In Too Deep board game. Thankfully Burnt Island Games has provided us a box with ample space for all of the parts, deluxe or not, so it's not really necessary, but I figure since I had spare…
This stencil provides many of the common shapes and designs needed when crafting and designing board game prototypes. Whether you're an aspiring designer or a print'n'play enthusiast, this will help you create tokens, tiles, and game…
Gloomhaven Boardgame Token Holder uses cover from potato chips
I tried to make it functional and practical (as for using the inserts during the gameplay as well as making setup and boxing process easier). My purpose was to make the whole game experience even better, I hope you'll find it useful.I…
These inserts fit into the Clank! basebox and holds the components, including boards, for the base and atleast two expansions; Clank! Expeditions: Gold and Silk Clank!: Adventuring Party These are the expansions we currently own. There is…
Three bits I use for a few games, originally made for Champions of Midgard). Ham / Food Glory / Horn - this model includes a disc that I use to raise it off the print bed for supports. Wood - has a cutoff branch so it does not roll off a…
I've just finished a project that I've been working on for the past few days - creating an insert for Ezra and Nehemiah. I've had the game for about a month now and I've been really enjoying it, otherwise I wouldn't have even considered…
A little standee for boardgame cardboard figures. It fits in games as Gloomhaven or Into the Deep. I recommend printing a test model before printing a batch, as different brands of filament can produce slightly different dimensions of the…
An old design primarily created to get better at 3D-modelling in Fusion360. Made for the boardgame / cardgame “Sequence”. Also, i just happened to have PLA colors around which perfectly matches the chips that come with the game.
This time it's not an insert, but a playertray where you can store your cards, resources or even tiles. This comes in handy in case of hidden information you don't have to store face down - but only visible to you. Or cards you don't want…
Church for Hamlet boardgame I am fairly sure I printed this with a 0.2mm nozzle, however it should still print fine with a 0.4mm, but you might lose some of the detail such as the windows in the towers. The furniture was printed with a…
Only for Retail edition! EDIT 01/12: I fixed the error i made during the upload, the box is now at the right size. EDIT 04/12: Put the stl on the correct orientation if you upload it to PrusaSlicer. 3 parts organizer to put all the game…
Boxes of various shapes for holding boardgame pieces. Designed with Spirit Island in mind, but can be used with any boardgame. Also useful anywhere you need to store various small pieces throughout the house, shop, or office. Printed with…
I really liked Werwerf's insert, but when I printed it on my Bambu labs the lid was too wide (so it bowed up in the center), and the discs didn't fit. I don't know if our printers have different calibration (though a calibration cube was…
I created these tweezers when trying to find best things to play ASL (Advanced Squad Leader) boardgame with. At the tip of the tweezers I created some overhangs that I was able to pick counters with, even from the middle of the stack.…
an arrow and magnifying glass for micromacro. magnifier print at 25%
This insert is for the Boardgame “ Middle Age ”. I store games horizontally but should be vertical storage friendly as there is no free space on top of each insert. Main focus was : facilitate the game setup and have a better visibility…
These are game inserts I designed so everything stays in the box safely, but can be easily taken out and simply placed on the table/board. This drastically reduces setup time - the card-trays are designed to hold sleeved cards. I hope you…
This insert is designed to organize and allow for quick setup and storage of the various components of Monumental as well as its two expansions ( Lost Kingdom & African Empires ). Except for the components specific to each factions (which…
Insert /Organizer for the boardgame Deep Sea Adventure
N-edge A long time ago, I worked with blind and low vision people. A common hindrance, for them, in enjoying boardgame was that they were designed for sighted people. Nedge is a game that was explicitly designed to include blind and low…
Simple press fit cover for Seasons Crystals track. Helps avoiding disaters if the board gets bumped while playing. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Filament: Prusament…
This is my solution for the Trudvang Legends storage problem. The small boxes will fit sleeved cards (im using Paladin sleeves), the story cards, that I don't sleeve, stay in the original cardboard tray. The tokens are stored as shown in…
I suggest you use a brim and lower fanspeeds (I used 50% after the first few layers), so that the edges won't warp from the buildplate.
This is my custom Egypt Pyramids Desert tile for catan-style boardgame 2.0 by dakanzla.
Super quick printable in spiral vase mode. Print without top and bottom layers and orient piece on its side. For cardboard about 2mm thick. Created in Wings3D but sadly Printables does not accept .wings files.
Token and card storage for the Dark souls Boardgame. Lets you have all the tokens and cards nicely organised in the box along with the models. Adds less than 1cm to the height of the lid, there are 2 deeper sections and 2 shallower…
Very simple life/mana counter, great for games like Aeon's End. Double sided with logo underneath (it represents the “0” value"). 2 models available: 1 to 10 points 1 to 15 points (larger diameter) Usa a printer like Bambu Lab or Prusa…
I did not like the available insert, since they either did not utilize the vacuformed insert or had to remove it completely. Also, not all inserts where removable from the insert/box to use them on the table. So I made a new one. Or ..…
I designed this for a friend, who made a Harry Potter board game and wanted to use a cauldron as a game piece. Of course you can scale it up and print it on a FDM printer. Print with cauldron edge on buildplate.
This is a simple, easy to print replacement for the victory tokens of the boardgame Paleo. Can be printed in multi color as well. If you want to support me creating new models, please consider buying me a coffee .
SEVEN STONES Throughout history and in many different cultures and religions, the number 7 is more than just a number by faith. In this mystical, turn-based game, this extraordinary number is honored. A game app with the name "Sevn"…
Dead Reckoning comes with nice little boxes to throw your parts in for easier setup and take down. I created a little insert to make sure the cardboard tokens of the player boxes do not get damaged by the other components. 11/2023 :…
Some dwarf themed coins I made for games like Caverna. The stl files are all single faced, coins typically don't print well at all on the face down side, and the flat sides glue together super easily, I can't even see the seams on most…
Just collected these cute miniatures from the web and resized them to fit a 28mm base. Please acknowledge the original creators. Each member of the family has its own! I play with the F-ing fabulous unicorn. 0.4mm is fine, sand them,…
These are simple bee-shaped markers used for the Apiary boardgame. The game comes with small cubes which are fine enough, but aren't very fun. This will make them much more appropriately themed. They measure slightly larger than the cubes…
