Counting matching models…
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…
Here's a B.C. Rich Warlock style guitar body I made. This is a fully functioning guitar body, just add a neck and electronics! I started making this in July 2022 right around the time Stranger Things 4 ended since I wanted the guitar from…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Easily printable parts for Lego Minecraft figures more work on more work also on https://dxbworks.etsy.com
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
This is a remix of a number of Halo Suits but a derivative of the links below. Still a work in progress, but getting there. : ) Sorry the files are all over the place but I'm not a very good tidy file keeper. There may be double ups and…
This model is made by: DoksterCat (me) My SketchFab page: https://sketchfab.com/dokstercat My Printables page: https://www.printables.com/@dokstercat_1161528 The LEGO body can are be separed or you can just have the full body. :)
2-Digit body for v3.0 of the 7 segment display. Single-digit version found here: https://www.printables.com/model/959686-7-segment-mechanical-counter-version-30-ratchet-fo Uses all the same internal components as the single digit version.
The (imo) Ultimate OneBlade Wall Mount (for Philips OneBlade Face & Body ). Precisely modeled for tight tolerances for friction fitting multiple accessories onto a space-saving wall mount (pressure fit/interference fit). No supports…
2-Digit body for the 7 segment display. Single-digit version located here: https://www.printables.com/model/860058-7-segment-mechanical-counter-version-21-ratchet-wi Two options: Standard depth (just like the single digit version)…
This is a Porsche 911 GT2 (Type 993) slot car body. It is designed to be used on the "Scalextric Super Resistant Team GT Lightning" car chassis. Those cars are widely available for around $25. Approximate scale = 1:32. Much of the credit…
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be attached to the front with 4 M3 screws. When using my chassis you…
Update : In V3 is the complete disassembled backcover of the Ally. Use standard if your PC has problems with the higher detail file ________________________________________________________________ Use V2 - Asus ROG Ally body with more…
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. ¨ Read the tutorial:…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
Print another model with magnets!
At the base of the trophy there is a slot to use the new text tool in Prusa Slicer 2.6.
I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own…
Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different…
No Supports > 35% Best in TPU (more confortable)
🇰🇭 សមសវគមនមកកនបរទសកមពជ Welcome to Cambodia! Angkor Wat (Khmer: អងគរវតត , "City/Capital of Temples" ) is an enormous temple complex in northwest Cambodia, and the largest religious monument in the world ! It was built by the Khmer King…
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. Read the tutorial:…
The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot Inspired by the models from FAB365: http://www.fab365.net/ My design process is covered in…
UPDATE 20230818: v2 has improved fitment! Designed for Nikon FE2 but might fit other F style bodies! I was tired of all the printable dust caps being less than ideal for printing. I designed this cap from scratch by measuring the body and…
Reuploaded with most recent fixes and edits. Thingiverse and discord have all the old files if you want them. *PAAR stands for Printable Airsoft Assault Rifle duh This is a set of files to get a body of an M4 looking thing designed to be…
**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…
Boden tube to extruder assist used to straight the boden tube at the top of the extruder so the filament goes in easier.
SCX24 JEEP Wrangler body Category: R/C Vehicles
UPDATE 11/09/2026 Someone had issues with the front cover while using the polar cooler so you should be aware that these covers were made before the polar cooler and from what I can see they won't fit without some hacking. I Will consider…
Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)
Articulated Action Figure 1/18 , 10 cm, but you can scale it down or up Blender file and STL files
I printed with:- Material: Matte White PLA (Bambu Lab) Infill: 0% Walls: 2 (although 1 wall would allow better light transmission) Layer/height modifier (0mm to 2mm): - Infill: 60% Walls: 3 Material: Black PLA-ST (eSun) [This creates a…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
The body cap has a slightly undersized M42x1 thread and the rear lens cap has a sightly oversized M42x1 thread. This ensures a loose fit. The prints shown in the pictures were done with a layer height of 0,15mm.
Lego Army Jeep Willys 1945
Print in PLA with 5 walls; yields very strong part with little to no flex. For me, the OG version would either delaminate or just break during unwinding.
Thank you all for the kind messages! Can't wait to see your images, please tag them in social media #ligero69 where possible. Much love! ……… Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required…
This mod of the MMU2S part mmu2-pulley-body decreases the space around the pulley axis and has more support guiding the filament than the standard part. When printing flexible filaments through MMU2S they tend to get stuck in the pulley…
Here's the new version of my cyborg conversion kit for Dummy 13, aiming to turn the figure into a 30min. Sisters/Frame Arms/Desktop army type of figure while taking advantage of soozafone's great chassis design. The head is a new spin on…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body. Print instructions Print as it is. I used PLA. Use a support enforcer in the part where the metal tip goes. Print it strong so use high…
This model is compatible with the lego system.
I love dummy 13 but found no female version I found that really mached the asthetics of the original dummy 13, so i tried to create my own. This is what i came up with. Thanks to @zoozafone for creating and sharing the ingenious model!…
💖✨ Thank you for always being by my side, giving me energy, and inspiring me to create even more designs for you 🐿💞 If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon:…
Samsung Galaxy Watch 4 - Body Case - 44 mm
I came across @MARCPRUDHOMM_1986375's excellent design for an inline filament cutter designed to fit the Qidi X-Max 3/X-Plus 3 models, but found it didn't quite suit my Qidi Q1 Pro. The longer tube on the bottom of the original body did…
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
This is a remix of the Honeycomb Stratocaster Body by Smadoo which itself is a remix of the Honeycomb Stratocaster Body by Conceptor. The design from Smadoo sadly was to big for my Prusa Mini so I redesigned it to fit my printer and went…
Y Axis Belt Tensioner Body for Ender S1/ S1 Pro to replace mine when it cracked. This replacement slides into the extruded rail to provide additional stability. +2/22/2025 Added File Ender3S1_GCR_Belt_Tensioner_Body_v8 specifically for…
De body smashed flat between youre pages, the only thing sticking out is the yellow smile 2 versions of the body with and without back layer (for strenght if needed) Printed in 0.12 hight 0.4 nozzle and a version for an orginal lego head…
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. Join our : Discord The Chassis for this model can be downloaded here:…
Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required may set you back about $105-135+. With material on top of that, consider buying the real thing at: https://sprkplg.com/product-tag/llg/ If you…
here is my jeep wrangler body for a trx4m. i print the main body and glue the details on how ever you want. it comes with the bumpers it needs to be put on a trx4m. it wont work on the normal bumpers. be sure to support the main body well…
This is a set of files to turn the humble pistol that is the xshot fury x into a rifle size blaster with a side bolt prime and stock. Performance doesnt change, the stock barrel is a good length, if you want to improve on that part find a…
Found this awesome file here http://www.blendswap.com/blends/view/86558 I spent the last week stripping the shells back. If you would like the suit you can grab all the files already devided up over at my shop on Etzy and create your own…
Printer CR10S Time 75-80 Hours Size: 380mm height (400mm is the printer max) Material: PLA
A small tool for easier body measurements, especially in situations where only one hand is available. Ideal for wrists, biceps, and similar areas. It is compatible with tape measures in centimeters and has a tolerance of approximately 1-2…
Remixed bodycap for nikon dslr and slr bodys. Thanks for Physics Dude for original model.
This is the second version of my Voronoi Stratocaster. The files for the first one have been lost, so we will pick up here! This second version fixes several issues with the first. Many of the dimensions were changed to work better,…
The skinfold method is a great way to estimate one's body fat percentage. This body fat caliper will help you calculate you BF % and track your progress. The scale is in mm and goes from 0mm to 60mm. Each line represents a 5mm increment…
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
This is a Fender Stratocaster-based body with a honeycomb pattern design on one half of the body. There is the model combined as a whole, but there is also a model of the guitar split into 7 pieces to fit onto print beds, with a channel…
This is a perfect place to hide a house or even a business key. I got tired of locking myself out of the house so I invented this. It looks just like an LB conduit body that everyone is used to seeing attached to the side of a house about…
Y Axis Motor Mount Body for Ender S1/ S1 Pro to match the belt tensioner body I replaced. The Y Axis limit sensor slides in and is friction fit. The OG model requires the attached pull tab to clip on to the wiring connector. This allows…
You can use it to study anatomy or for base mesh to modeling other characters.
UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…
Remixed with the original tray for wider tray body making it easier to catch extrusion when hotend is at left most pos
This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others… I modeled this cap after an existing cap. The print is not quite so simple, as the guides for the bayonet catch have a slope. I…
I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
Lost the body cap for my fuji x camera, remixed file to recreate the same. Should be comparable to Fujifilm's Camera Body Lens Cap BCP-001 Printed with a 0.6mm nozzle at 0.2mm layer height with support cubic infill for ~35min print time.…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
This torso and head will replace your Dummy13 torso and head. Best if printed at 150% or larger. The torso has all the connectors printed inside so it is one piece. You will need the neck and head mount for the Xenomorph head. I am…
Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.
When a bottle is getting low enough that it stops dispensing the content, what do we do? Add water? That makes the content less concentrated and makes is thinner. Remove the cap and start pouring by gravity? Not very convenient. Through…
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
February 2023 update: Added a tonneau* (in french dans the texte) cover with some cable management (holes) and a place to stick the power-on switch that kept hanging out of the car. This can be used with the V2 of my RC car. You need to…
Hollowed out the excellent model to make a slot car shell. Print Settings Printer: Ender3 Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PLA White Category: Hobby
This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to…
Only included a step file with the designs, so its easier to modify if needed. I know the side panels dont line up perfectly with the fenders, because they were designed separately and I put them together in one file. They should fit…
This is rambros ' excellent EMD GP60 model for Dragon Railway , remixed with a Norfolk Southern livery to print on a Bambu AMS. This contains the new files for the NS livery, the rest of the parts and full assembly instructions can be…
### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…
Freddy Fazbear Full-Body Suit Original .blend files are included for tinkerers who want to modify Freddy in their own way, since my own cuts weren’t done very well. These files are hidden inside the Freddy Fazbear collection within the…
The .3mf file has custom orientation & painted supports for the better quality printing.
For my needs, I made it easier to access the electronics, the battery Material Magnet 10x4 strength 3kg ( https://www.unimagnet.cz/p-10_z831/ ) 3 pcs screw M3x8mm (used original) 1 pc screw M5x8-10mm Robaki - many thanks for a great model…
A realistic Deadpool body bust , capturing the bold personality and iconic look of Marvel’s favorite anti-hero. This model showcases detailed textures, muscular structure, and the recognizable red-and-black suit , bringing the character’s…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
The jaw is printed on the body so you don't have to stick it on anymore
I created the template based on a Telecaster body model by Gustavo Rocha in GrabCad. I used it for a guitar I'm currently building. There are six parts to the template, each part sized to fit on a Prusa Mini+'s build plate. I printed them…
A scaled-down version of the original. Many bathroom products come with pumps to extract the bottle contents, but the tubes on the bottom of the pumps don't reach all the way to the bottom of the bottle. Thus, after the pump stops…
