Counting matching models…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…
*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…
Newborn baby skull from https://cults3d.com/en/3d-model/various/craneo-nino-recien-nacido . I have made significant modifications in Blender to clean up the models geometry for better printing. Looks like Sam from Trick ‘r Treat, but this…
Cupra Born has some big trays to store things. But it is difficult to organize cards, pens, coins for shopping carts etc. So I first tried the model of Sven Van Opstal at Thingiverse to insert in one of the cup holders. In my case it had…
I've designed a pacifier for the Baby Born doll of my daughter. You'll have to print all 3 parts and stick them in each other. The pieces should hold together pressing them in each other with some force. If they turn out too loose…
3 Part Celestial Dial Pendant from Bloodborne. Modelled at 10cm diameter. Probably will turn out better with a resin printer but I printed this with ULTRADETAIL setting in prusaslicer and it turned out nice.
General Grievous, born Qymaen jai Sheelal walks amongst the destruction. Will add light sabers in future.
Happy Halloween! One of my favorite games as of late has been the RPG Bloodborne. 7 years later, and it still holds up. I love the Gothic atmosphere of the game, the challenging gameplay, and more pertinent to my little hobby here, the…
Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…
Re sculpted this helmet based on the models from Jedi Fallen order. Feel free to use/modify/sell prints along as you credit me and link back to here. Just don't sell the file.
Detail printing by entry down with supports. Layer height 0.2 mm Nozzle 0.4 mm
The wife wanted some colorful hangers for the new baby and asked that I whip some up. Super simple and easy to print and strong. 195mm (7.75") wide Does not fit standard closet bar.
These will need supports but I do my best to make them print friendly. Be mindful of weapons etc... when removing supports! Updates: Feb 20 added one more standard zombie in a custom pose Models in this collection: Standard Zombie x 3…
My DM made a remark about the Dragonborn by BriteMinis not having a tail, and that he would really like to have a version with a tail. Here you go. Huge thanks to Brite Minis for creating their wonderful miniatures in the first place!
once you wear this daredevil helmet it'll make you feel as if you were born again.
This is a big, big boy. When I modeled The One Reborn, I was taken by surprise that I would need a gargantuan base of 8 inches in diameter to truly capture the scale of that creature. When I made the Amygdala however, I KNEW I would need…
Dragonborn Paladin dnd miniature with a battleaxe. There are two file versions: one with a base and one without. I sculpted the model in Zbrush and scaled and rendered it in Blender. I recommend printing it using a resin printer.…
This model is a redesigned Voron Stealthburner X Carriage mount for the Flying Bear Reborn 2. The major goal of this redesign was to be able to use the wide Stealthburner ecosystem on the Reborn 2. Further goals were to preserve as much…
This is a remix of the Daredevil Born Again helmet, which has 3 parts and each holes for 4 and 6 (x 2) mm magnets. Obviously my printer is quite small and the files do take a while longer than they should- but with pauses, you can easily…
Fantasy - Dragonborn Warband: heavy infantry guards with swords, medium infantry warriors with spears and bows, light infantry levies with javelins for 28mm wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't…
I made this suit/suits awhile ago and was never really satisfied with how it came out and kind of forgot about it. Few days ago I was digging around some of my old work looking for some reference material when I stubbled across this once…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
To scale glass dagger from the epic series Mistborn by Brandon Sanderson.
Little print to raise the arm rest of your Cupra Born
Yeah. Kind of getting out of hand now.
Bootsystem - MVP with a hook for small shopping bags or the original charging cable. Use the orientation for the buildplate as provided in the STL. For more robust results: 4 Walls 8 Bottom layers 8 Top layers 0.2 layer height 25%…
A keychain of the Hunter's Mark from Bloodborne made by From Software
Boeing 737 Airborne Early Warning and Control This is a printable model of Boeing E-7 AEW&C aircraft. You may need to scale. The pictures uploaded printed at half scale. Too much scaling can be destroy some parts, you should be aware of…
Born Bad Buzz from brawl stars. I wish I had a dog like that.
Official air outlets for Reborn 2. Just posted here for easy access
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
1 Introduction This model introduces the VzBoT-Vz330 gantry to the Flying Bear Reborn 2. It enables the usage of the Vz-Printhead without changes. Key Features 180° rotated Vz330 - 2WD setup Support of the Vz-Printhead without further…
Visual stimulation can be helpful in your baby's learning. Print these cards in high contrast using your multi-filament printer! Also work as coasters. Each card is double sided, and can be hung with a printed clip. Print settings for…
VJM787 made a fine detailed model of the ASU85. Unfortunately it is not printable in smaller scale, especially the tank track fall apart. I liked to make it printable for a future project, so I did. On CAD-screenshoot you can see all red…
Based on Earthborne Rangers - Organizer by CaseW0Lf (https://www.thingiverse.com/thing:6187016).
Easy to print TTRPG (DnD) player character of a female dragonborn rogue thief. Wokrs well with 0,2 and 0,4 nozzle. Made for 25mm and 28mm scales.
This model is a custom mount for the MAK Vector Duct for the Flying Bear Reborn 2. The MAK Vector Duct (slim version) uses a 5015 blower for part cooling and fits perfectly into the dimenions of the Reborn 2. Link to the MAK Vector Duct:…
U.S. Army Airborne Badge Wall Art 8.3 inches x 4.1 inches Model is sized to print on a standard Ender 3 but can easily be scaled up/down.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Remix of the great models of Pfelpensson & somtec (see source section below) The truck cabin was modified to airborne version of the GAZ66. The Zu23-2-canon is a fixed one with strengthening at some places, to be able to print. Sized for…
In some situations I have to sit in my CUPRA Born and wait while it is charged. Often I am watching some videos on my tablet. With this holder it will be more ergonomic, because the iPad will be attached to the entertainment monitor of…
Printed on my MK4 with MMU3, with 0.25mm nozzle, and variable layer height. Hatchbox Grey PLA. Depending on your printer configuration and settings you may need minimal supports. I still need to clean up print as you can see some of the…
This set of 20 bookmarks features the iconic Allomantic symbols from Brandon Sanderson’s Mistborn series, also known as the Steel Alphabet. Each bookmark represents a different metal used in Allomancy, making it a perfect set for fans of…
Kelsier's dagger from Mistborn! This is designed based on the one that was available in fortnite. It can fit a 300x300 bed printer. Mirror the pieces to get the complete dagger. One side will take roughly 108g at 17.5 hours at .28MM layer…
Overlays for the Mission Cards from Brandon Sanderson's Mistborn Deckbuilding game. It is very easy for the markers to get knocked around or off the cards. This overlay makes distinct slots for the markers to sit in, making it more…
The box contains 4 smaller trays. Two for all the game tokens and two for the energy tokens besides the aspect cards (easier management and no displaced tokens). Print: 1x “ebr_box_lid” 2x “ebr_ins1” 2x "ebr_ins2" Printed on Creality 6-SE…
Atium symbol from Brandon Sanderson's Cosmere. Designed to be used as a bookshelf decoration.
This model was right at the top of my list for a while now. While the Orphan of Kos is a much harder final boss than this guy, the Moon Presence wins in terms of visual appeal. I went into this project thinking it was going to be an easy…
Let me know if you like it!
The central storage compartment is very deep and depending on what you want to store in it, it's not that practical. This storage tray adds a top layer where you can put in little parts and pieces. Still allows to put a drinking bottle in…
Cupra Born charging tray oprimization for better charging. Model was tested with iPhone 15 for a week and never stopped charging, not even during heavy driving. Filament: PLA Printer: Creality Ender 3 V3 SE
Daredevil born again helmet stand: I tried to set this up for easy printing. The text & the cityscape on the logo are separate files and glued together. Once glued together there is a notch in the base where the completed logo can be…
28mm Dragonborn Warrior with javelin Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
A cheaper and simpler version of the HIVE designed in fusion 360. Print List: 1x Hive Frame 1x Hive Drawer Buckets (add sizes together and it should add to 12) 1x Label (Use Inkscape or similar to edit) Print Settings: The Buckets can be…
Few mm of build volume on the Y rail will be lost. Additional hardware needed: pair M2.5x6 FHCS, few heat set inserts. Warning! Do not even attempt to fire it up before clearance check. Requires some hardware modifications: X endstop…
No supports needed. There is no actual chicken inside.
The vents on these printers are incredibly fragile. They really should have the STL files available. These will do in a pinch. Mine were heat deformed in a thermal runaway event that you can find on Youtube. I asked support for the STL…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
28mm Dragonborn Warrior with Bow Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Yes Resolution: 0.2 mm Filament: Creality PLA White Notes: I added support for the bow directly in the file Category: Games
You are in for a real treat. I've been on a modeling binge, and that is mostly in preparation for something special I'm doing this October. Modeling the Cleric Beast was part of that. This model actually turned out much easier than I…
When I saw the Guardian in Starfield a few weeks ago, the first thing I did was search online to see if anyone had modeled it for 3D printing. When I saw that no one had, I opened Shap3r and 15 hours of work later, here it is! As this is…
The Nerf Jolt is one of my favorite blasters because of its compactness, cost, and reliability. One of the only things I don't like about it is it is not very accurate. This model allows you to simply clip a barrel onto the blaster and…
Dragonborn Paladin miniature for tabletop RPGs. Equipped with dragon-themed spear and shield. Create custom, print-ready miniatures at [** Miniature-Maker.com **]( https://miniature-maker.com ). Generate unique characters in minutes for…
Happy Halloween! Well, it's finally over. My last boss from Bloodborne: The Old Hunters, and my most favorite out of all of them, is the grotesque man-horse Ludwig. This wasn't my most challenging sculpt out of the five, that honor goes…
"A corpse should be left well enough alone." Out of all the five bosses from the DLC, I think Lady Maria was the most challenging to sculpt. It's simply the level of detail in her clothing that did it. Unfortunately the last week for me…
With the release of the Huntsman models, I realized I should step outside my comfort zone and start modeling enemies with clothes. This is especially true if I want to do Bloodborne bosses such as Micolash, Lady Maria and Gehrman…
I wanted to recreate Josef and Marie praying over newborn Jesus scenery, that looks just like a two dinosaurs fighting over a table saw. I've added small stand legs, so you can put model on a table or anywhere you want. Also I made the…
Two turtles are both sitting on the ends of a long symmetrical "stone". They like to spin around in circles. Looking at each other, deeply in love, they easily turn in either direction when you let them spin. When they sit next to each…
DIY top cover, I'll soon provide build details
This is my take on a Dragonborn Paladin. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
must add supports to model
Filament guide for placing spool internally in the printer printed in place, no raft, no supports, for best thread quality use 0.16 layer height Print Settings Rafts: No Supports: No Infill: 25 Filament: U3Print PETG Category: 3D Printer…
Bonjour, J'ai modélisé une version de l'évolution de la moto pour un ami motard qui aime la moto sportive. Si vous n'avez pas d'imprimante n'hésitez pas à me contacter pour avoir le votre ! Pensez à vous abonner à mon compte pour être au…
Yay! First model of the new year! I was working on this one since late December, and I think it turned out pretty good. The reason why it took so long to release is mostly because I ran out of resin, and had to wait for more. However,…
This is my take on a Dragonborn Barbarian. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Представляем вам 3D-модель бойца элитного спецназа ВДВ РФ — военнослужащего 45-й отдельной бригад
This model is compatible with the lego system.
This project was a long time coming. I've been working on this series of miniatures for what feels like months, I started on these even before I worked on the Camp Clearwater miniatures. Part of what took them so long was creating three…
This is my take on a Dragonborn Warlock. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
This is my Double-headed Dragonborn Paladin. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
Flexible cable channel for Reborn 2 v1
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Daredevil Born Again episode 1 broken horn piece. Great gift / conversation piece for any Daredevil and Marvel fan. Quick print, .12 layer height for quality, no supports needed, any infill you want is fine, and a brim is helpful for bed…
This is my take on a Dragonborn Druid. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
3x Mission Card Overlays (Of any of the versions, see edit below) 12x Bonus Indicators Print off the three mission pieces in whatever combo you like. I suggest doing a filament swap at the last few layers to get the numbers to be more…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
This is a remix of the printed Y gantry parts of the VzBoT-Vz330 for the Flying Bear Reborn 2 VzBoT Gantry Mod . There are two different variants offered: Shaft variant 1 (SV1): To be used with M4 shoulder screw and hex nut (Mellow screw…
It's better if you change the color during the print in the last layers to differenciate the coin part from the symbol, but you can just paint it with a marker pen. I used a 0.6mm noozle.
28mm Dragonborn Line Infantry Soldiers with muskets Made with Desktop hero 2.0 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
A Dragonborn RPG figure created in TitanCraft for games like D&D.
The files for installing HoneyComb on the sidebar of the Reborn2 printer. It can be used for tools, electronics. You are limited only by your imagination
Just got Earthborn Rangers with the deluxe token set, but needed an additional set. tradenmyr made a great set over on Thingiverse , but the tokens were slightly smaller and didn't have the painting done so I've updated that here.…
Mounting helper for Flying Bear Reborn 2 Linear Rails Print with 15%iInfill Print of each and dont forget to adjust your Z-Offset after adjusting rails :)
GrimGrin from MtG. my brain refuses to think of him as anything other than GrimGrim. If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
This is the third iteration of a project I have been working on. This one is the best I have made yet. I wanted my Jolt blaster to be a bit more accurate so I designed a folding barrel system. You seriously feel like James Bond when…
