101 models
Comfortable and sturdy Abrams tank track bracelet made for tank fans. Has easy clip fastening. Assembly: Cut filament in right lenght (about 15 mm) and gently insert with aligned another track element. Pohodlný a pevný náramek ze článků…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
M1 Abrams - wall art - keychain Scale it to your needs Happy printing!
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
ABRAMS M1A3
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Part of the Japanese little Oni mask series - see also Little Coral , Little Sakura , and the elemental series InfernOni , TyphoOni , OniKaze (Air, Wind) DISCLAIMER. It took almost as long to take the supports off this thing than to print…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
Since the supplied magazine bottom from Mantis didn't fit my CobraMag(9mm), I designed this alternative bottom piece. I added a picatinny rail so I can mount my mantis to these magazines. It was designed to fit a 9mm 1911 CobraMag and…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Universal Flight computer mount for 10cm diameter rockets this is a rough draft name not definitive yet description and instructions to be edited
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Tvorba modelu válečku pro třídicí linku brambor
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
This is a remix of https://www.thingiverse.com/thing:4718232 Print at 0.12mm layer height with supports on build plate. Assembly instructions (See images below for reference): Remove support block from under the back of "Turret Top.stl"…
NEW MODEL HERE: https://www.printables.com/model/695019-m1a2-abrams-sep-redux 1:42 Scale M1A2 Abrams Modeled in Fusion 360 The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense (now General Dynamics…
M1A1 Abrams Tank Model A detailed 3D model of the M1A1 Abrams tank. The turret can rotate, and the parts must be glued together. Scale 1:72
OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…
OUTDATED CHECK MY PROFILE FOR NEW MODEL
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. I will eventually get to 3D modeling my own 3D model, but for the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
The combat operations of the early 2000s with Operation Iraqi Freedom showcased that the M1A2 System Enhancement Package (SEP) still had rooms for improvements. Combat-oriented upgrades such as the Tank Urban Survival Kit (TUSK) I and II…
me gonna put person on mg cause yes
Brambo is here to crash through your print queue with round vibes, snorty charm, and... an optional tail! Cute, compact, and a bit wild – he’s your new forest desk mascot. ✔ Includes two 3MF files: • Monocolor version – with and without…
I redesigned my model of the Abrams, in many ways. First, the tracks and hull were split for easy printing, and the turret rotation has a better mechanism. Next, I made it modular, but adding options for addon armor. There are options for…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army M1 Abrams tank…
Refer also to this link: https://www.thingiverse.com/thing:5824415
This is a print in place design with very little support material. The goal is to fold the cubes together to form a larger 2x2x2 cube. Note that the two edge blockers need to not interfere with each other. There's one near solution where…
The M1A2 SEP (System Enhancement Package) is an upgraded M1A2 Abrams. Its most significant upgrades is the better thermal sights for not only the gunner and commander, but also the driver as well who previously only had access to night…
The print turned out great but please ignore my paint job. 0.2mm layer height (I don't even own a Prusa but I love Printables), supports (touching build plate only), requires a bit of sanding depending on your printers cooling. Enjoy!
A detailed model of a M1A1 Abrams Would Not Recomend printing this model small.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Want a custom design like this? I take on commission work — send me a direct message on this platform to get started. Support My Work If you'd like to support what I do, consider joining my Patreon . Members get weekly behind-the-scenes…
Hello everyone, I have vectorised a technical drawing of the US M1 Abrams Tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10 minutes! Please note the settings in the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bram Stoker's Dracula - Count Dracula Old - 1992 3D printable model.
Bram Stoker's Dracula - Abraham Van Helsing (Anthony Hopkins) - 1992 3D printable model.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Bramblin, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Brambleghast, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
3D MODEL DESCRIPTION This tank was built on a 1/20 scale. All STL files have been uploaded. I built my own project using an ESP32 and a PS4 controller, but you can also use a different electronic control system if you prefer. I’ve also…
The M1 Abrams is an American main battle tank designed for modern warfare. It was first introduced into service in the early 1980s and is named after General Creighton Abrams, a former U.S. Army commander. The Abrams has heavy armor,…
Printed with black PLA. Let me know your opinion in the comments, feel free to share ideas for other things i should create and have fun with your abrams x. Follow me for more cool silhouetts and more.
Simple to print, you dont need a multi colour AMS or MMU unit . All you need is black and white filament. This will print in any FDM printer capable of printing 0.08 layer height. This filament painting is created with Steve Lavitas'…
Parts: The side plate replaces two sloped parts on the left side of the cannon The muzzle brake replaces the large cylinder part halfway down the length of the barrel The turret parts replace the small slope pieces that make up the front…
My Anycubic Kobra Max printer had to be placed on a table “sideways” so the build plate action moved left and right when standing at the table looking at the printer. This orientation placed the arm for the filament spool hanging off the…
its an updated version of my previous model of this tank
This is a cool piece of decoration for any room! Print settings: Nozzle: 0.4 or smaller Layer height: 0.15 quality (I strongly recommend you ironing the top for a better print results in the end.)
FULLY 3D PRINTABLE MODEL OF ABRAMS IN 1/35 SCALE NEED GLUE Top turret gun lockin is fragile be careful MANUAL: I count on your feedback
I am proud to present a new Printable Interlocking Puzzle Cube, but this time I didn't design it. Following the release of PIP#2, I was contacted by Bram Cohen (puzzle designer and author of the BitTorrent protocol) asking whether I had…
Gracie Abrams Signature Star Necklace/Earring
pomocníci pro kreativní přípravu jídla, creative food preparation helpers
Simple 3D printable model of an M1 Abrams tank, designed as a single-piece print with no assembly required. Captures the iconic shape with clean, minimal details, making it quick and easy to print—perfect for display, painting, or…
pomocníci pro kreativní přípravu jídla, creative food preparation helpers
Miniatures for the Hundred Acre Woods expansion for BrambleTrek, witten by A.R. (Ash) Swain, original artwork by Marta Kowalczewska and Jan Cruz. Based on the original BrambleTrek by the same author and the original work of Winnie the…
This is my adapter for mounting the Hero Me Gen7 to the Anycubic Kobra. Please see https://github.com/Jookia/KobraMe for source code. You will need: 1x A Hero Me Gen7 6x M3 heat sets 6x M3 8mm screws (optional, the Kobra toolhead screws…
I wanted more flexibility with which screws/bolts could be used with the mount. I like the idea behind the bracket and how it allows for easy removal of the raspberry pi. I had issues with the lay lines separating on the former model when…
Do pobrana koło napędowy do bramy przesuwnej automatycznej do przekładni/napędu KIBY. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń,…
I print it on 0,16 layer hight and it looks and works fantastic. Two useless handles I was deleted but little supports are still needed for two hinges.
The sole adhesive of my Vibram FiveFingers shoes had failed and I wanted to repair it with ShoeGoo. Some areas were easy to clamp for the 24H or so curing time but some of the does were going to be a challenge to get good surface contact.…
pomocníci pro kreativní přípravu jídla, creative food preparation helpers
Gate/wicket lock cover. Protects the lock from rainwater ingress. Glued with double-sided tape. Two sizes: 30 and 35mm. Osłona zamka bramy / furtki. Chroni zamek przed przedostawaniem isę wody opadowej. Klejone na taśmę dwustronną. Dwa…
Zapinka do siatki bramki OMEGA. Do pobrania pliki w stp, stl i obj modelu wg. poniższego szkicu.
pomocníci pro kreativní přípravu jídla, creative food preparation helpers
Medaile na bramborový den, tisk v lepší kvalitě
Count Dracula — Bust Inspired by Bram Stoker’s Novel This bust depicts Count Dracula as Jonathan Harker first encounters him in his castle at the beginning of Bram Stoker’s novel. I chose this early appearance, before the Count grows…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Green Transmission Distance: 6 PLA Sunlu Orange Transmission Distance: 8.5 PLA Sunlu White…
This is a cigar rest i designed for my cannister(can) cup shot from an M1A2 Abrams. Anyone with a can cup will love this. It is a simple print that is very useful.
My desk is not that big but has to accomodate a 32in monitor, a laptop stand and a headphone holder somewhere, so i bought a BRAMLEY Power monitor mount, and designed this holder for the central tube. inner diameter is 35,2 mm, so if…
имеются минимальные внутренности, размеры вы можете подобрать сами, как душе угодно
Wózek prowadzący do bramy Mido 600, 800, 1000
Learn more about Braillest's embossing and repair process here . https://github.com/braillest-books/Dracula-by-Bram-Stoker
I bought a Bramble Cluster Case from C4Labs, but it was missing one of its trays. This was mocked up to fit as a replacement, and has been working wonderfully without issue. Print in PETG for best results.
Made these for a book that I am writing.
daš na 2 prsty prilozis k bramburku lehce das prsty k sobe a pak dat jen do pusy : )
Tested it works with the Sliding gate opener(przesuwny napęd bramy). Printed in SUNLU PETG with 0.15mm layer high.
Series: Vhorlath Realms Season: Season III – The Shattered Crown Faction: Beastfolk – Thornbound Herds Model: Brambleshield Guardian The Brambleshield Guardian stands where the old woodland paths narrow. A broad rootwood shield and heavy…
I needed to push some cabling to the roof so i scanned this tille and adjusted as required.
[PL] Zgubiłeś lub zniszczyłeś plastikową podkładkę między trzpieniem a uchwytem ramienia napędu bramy Nice? Ten mały element to tuleja ślizgowa, która zapobiega tarciu metalu o metal i zapewnia płynny ruch obrotowy podczas otwierania…
A handheld paper ball blower styled after the M1 Abrams tank cannon. Roll a small piece of paper into a ball, insert it into the barrel and blow through the back to launch it. The model prints in one piece without supports or assembly and…
[PL] Zaprojektowałem wytrzymały uchwyt montażowy do napędu bramy wjazdowej firmy Nice. Projekt sprawdza się idealnie i solidnie trzyma konstrukcję. W plikach znajdziesz sam główny uchwyt, dedykowane tulejki dystansowe (2 sztuki na stronę)…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
3D printable topographic miniature of Bramsche - 🇩🇪 Germany Capture the beauty of Bramsche 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 52.409, 7.976 (LatLng) .…
[PL] Zaprojektowałem wytrzymały uchwyt montażowy do napędu bramy wjazdowej firmy Nice. Projekt sprawdza się idealnie i solidnie trzyma konstrukcję. W plikach znajdziesz sam główny uchwyt, dedykowane tulejki dystansowe (2 sztuki na stronę)…
[PL] Zgubiłeś lub zniszczyłeś plastikową podkładkę między trzpieniem a uchwytem ramienia napędu bramy Nice? Ten mały element to tuleja ślizgowa, która zapobiega tarciu metalu o metal i zapewnia płynny ruch obrotowy podczas otwierania…
NEW MODEL HERE: https://www.printables.com/model/695019-m1a2-abrams-sep-redux 1:42 Scale M1A2 Abrams Modeled in Fusion 360 The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense (now General Dynamics…
A 3d-printable model of a helmet from the anime Seven Deadly Sins I made for commission and allowed to publish
3D printable topographic miniature of Bramsche - 🇩🇪 Germany Capture the beauty of Bramsche 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 52.409, 7.976 (LatLng) .…
Bram Stoker's Dracula - Mina Harper (Winona Ryder) - 1992 3D printable model.
Bram Stoker's Dracula - Jonathan Harker (Keanu Reeves) - 1992 3D printable model.
Bram Stoker's Dracula - Abraham Van Helsing (Anthony Hopkins) - 1992 3D printable model.
https://www.youtube.com/shorts/_mXaOu501l8 Brama Herman, kontraktony otwarcia zamknięcia bramy na kątownikach do druku 3D, sterowanie Supla.
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. I will eventually get to 3D modeling my own 3D model, but for the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
![Subramanya, the Radiant [Easy to Print Filament Painting]](https://media.printables.com/media/prints/599405/images/4772133_51294982-c619-4633-ac90-29868a64e7f8_1c35125f-53e2-4055-8357-b97e62833320/rt-1.jpg)
