P
PrintablesPeter Farell
Little Green Army Women : Forward Observer.
Little Green Army Women : Forward Observer. Pairs Nicely with This model in Myclub
- Downloads
- 111
- Likes
- 15
- Rating
- 0
Search results: bse
Counting matching models…
P
PrintablesSteveT
Rollers for Roll-On Roll-Off Observatory Shed for Astronomy
Rollers for Roll-On Roll-Off Observatory Shed for Astronomy. These run on pipe of diameter 14 to 18 mm, preferably stainless steel pipe.
- Downloads
- 39
- Likes
- 13
- Rating
- 0
P
Printablesh2odragon
Mgt Sign: Observe exsanguination safety protocols
100x160mm sign, bearing a relevant reminder from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You may wish…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
Printables44sunsets
The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (2021)
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
- Downloads
- 2,081
- Likes
- 273
- Rating
- 4.95
P
Printables29flo
Absent One
All my photos are REAL and show an actual 3D-printed figure photographed by me. This figurine is hollow inside , which opens up various possibilities for its use - for example, with a light inside, it can serve as a lamp. [ Suggested…
- Downloads
- 1,840
- Likes
- 456
- Rating
- 5
P
PrintablesAsh Colley
One Wish Willow (Obsession)
Movie Prop From The Movie 'Obsession' (One Wish Willow)
- Downloads
- 1,630
- Likes
- 50
- Rating
- 4
P
PrintablesCasey Billadeau
Obsessively Accurate TNG Starfleet Combadge V2 - 2360s
Hi! This is the latest revision on my uber-accurate Starfleet combadge. My first attempt at this came back in 2020 when I had only reference images to go off of. I later acquired a badge from the now-closed Xscapes Props, cast from a…
- Downloads
- 913
- Likes
- 114
- Rating
- 4.67
P
PrintablesJorge Cano Gorrachategui
One Wish Willow of Obsesion
One Wish Willow stick from the Obsesion film
- Downloads
- 415
- Likes
- 15
- Rating
- 0
P
PrintablesQuittenkompott
Zugspitze and Eibsee Mountain relief
Looks great with 0.2mm layer height but only gets better with smaller layer height! Very easy to print, doesn't need anything special.
- Downloads
- 359
- Likes
- 21
- Rating
- 5
P
PrintablesHarry Shone
Climbing / Abseiling man wall art
This is a recreated 3D model of an available bronze sculpture you can buy online. Requires quite a few supports due to the odd geometry. He's got holes in his hands so you can easily thread the “rope” into his hands. Hope you enjoy.
- Downloads
- 352
- Likes
- 25
- Rating
- 0
P
Printablesjs500
Obsession with All Expansions Through Characters Insert / Organizer
Update May 14, 2026 : If you have the Victorian Box, please see this updated insert instead: This is an insert / organizer for Obsession with all the released expansions through the Characters expansion (but see a few excluded items…
- Downloads
- 344
- Likes
- 78
- Rating
- 5
P
Printablesnullrails
Streamline Observation Car for Dragon Railway
Streamline Observation Car - Compatible with Dragon Railway This is a streamlined observation car, inspired by the stainless steel cars used in mid-20th century passenger trains like the Chief . Scale and Size : While the original…
- Downloads
- 307
- Likes
- 36
- Rating
- 0
P
PrintablesMontoro
Bolt Action WW2 German Forward Observer No Base
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
- Downloads
- 299
- Likes
- 26
- Rating
- 0
P
PrintablesStigern
Subsea Fairy House
Subsea Fairy House – Deep Sea Magic in Miniature Dive into the whimsical depths of the ocean with this charming Subsea Fairy House! Designed to look like a cross between a coral-covered cottage and a nautical hideout, this model is…
- Downloads
- 288
- Likes
- 90
- Rating
- 0
P
Printablesolivvybee
Obsession Box Inserts
Inspired by Steeveeet's insert for the purple box , I've designed an insert for the other purple box and the player boxes for Obsession (2nd edition). The player box insert holds the five starting tiles, the reputation tokens and tracker,…
- Downloads
- 263
- Likes
- 37
- Rating
- 4.33
P
Printablesjs500
Obsession Insert / Organizer - Holds 2nd Ed. Base Game, Wessex, Upstairs Downstairs, and Useful Box
Update: I posted an updated insert that supports all the released expansions for Obsession through the Characters expansion here . ***Original Post Below*** This is an insert / organizer for Obsession (2nd ed.) with: • Wessex Expansion; •…
- Downloads
- 251
- Likes
- 53
- Rating
- 5
P
PrintablesBeusekomse Baan
G-Scale (1:20 / 45 mm track) Ffestiniog Railway "Bug Box" Observation Car
Glue the front walls to the sides with CA glue (use filament as dowels). All other items are mounted using M2 screws. Standard LGB wheel sets rotate in 6 x 3 x 3 mm bearings. M4 bolts are used as weights in the coupling hooks.
- Downloads
- 239
- Likes
- 24
- Rating
- 5
P
PrintablesSteeveeet
Obsession board game insert: Make it tidy for the Gentry
The wonderful board game Obsession has delightful theming and components, this will help organise them. It will fit inside one of the component boxes and hold everything (apart from the bag of improvement tiles). It's designed to make…
- Downloads
- 236
- Likes
- 32
- Rating
- 5
P
PrintablesIan McDermott
Obsession Board Game Insert (incl. Expansions)
This insert will hold all of the components for the following editions of Obsession and it's expansions, anything outside of this that you may have (1st ed, Useful Box, etc), I cannot say whether it will fit or not: Obsession base game -…
- Downloads
- 225
- Likes
- 29
- Rating
- 5
P
Printablesjs500
Obsession Victorian Box Insert / Organizer - Fits Playmat, Rules Compendium, and All Expansions to Date
This is an insert / organizer for the Obsession Victorian Box (big box) with the playmat, consolidated rules compendium, and all the released expansions through Characters (but see the excluded, mostly redundant items listed below). It…
- Downloads
- 214
- Likes
- 37
- Rating
- 5
P
PrintablesSpacebunny
Coffee Obsessed & Coffee makes me poop & plain one (remix me!!!) ; Keychain/Charm.. Articulated
Coffee obsessed. Why yes, yes I am. How would you like your coffee; Small Medium or Large. (larger the more easier to read) Any other sayings you want let me know. I can do longer arms and feet too. -No supports, yes brim, enable thin…
- Downloads
- 188
- Likes
- 30
- Rating
- 5
P
PrintablesKick1Fire
Stickman Observateur
Découvrez le modèle 3D du Stickman Observateur, une représentation curieuse et attentive d'un personnage emblématique dans une posture d'observation. Ce modèle ludique et minimaliste est conçu pour être imprimé en 3D, ajoutant une touche…
- Downloads
- 179
- Likes
- 17
- Rating
- 0
P
PrintablesDaniel Zimmerli 🖖
Remix of Obsessively Accurate TNG Starfleet Combadge V2 - 2360s
All credit to the original designer. All I did was split it up. Enjoy! UPDATED to be 3 separate STLs one for each color.
- Downloads
- 178
- Likes
- 56
- Rating
- 5
P
PrintablesDirtClodimus
PanzerObserver 2.4 Camera Cover Remix for OV5640 Camera
This is a simple remix of the cover from the original PanzerObserver2.4 camera mount. Check out the original design to see if it's what you need instead. I purchased this camera and it didn't need the extra hole that the original cover…
- Downloads
- 173
- Likes
- 15
- Rating
- 5
P
PrintablesDeeDee
Glasses for observing the Solar eclipse
The model fo laser cut is adapted for polypropylene with a thickness of 1.6mm Original model: https://www.instructables.com/Homemade-Glasses-With-Laser-Cutter/…
- Downloads
- 171
- Likes
- 17
- Rating
- 5
P
Printablesconceptual_hardware
BSE_01 Cyberdeck
Hackaday.io Project Page The future is here, it's just not evenly distributed" - William Gibson This is a custom built cyberdeck designed around a raspberry pi 4, waveshare 12.3" screen, 12v Battery, and a mechanical keyboard. Print: 4 x…
- Downloads
- 138
- Likes
- 91
- Rating
- 0
P
Printablesorto
Palomar Observatory
This is the mini replica of the Palomar Observatory. I downloaded it from Trimble SketchUp 3D Warehouse. Below is the link: http://sketchup.google.com/3dwarehouse/details?mid=bb19b2f9a6f6d605b63de0163627bef7 happy printings, Category:…
- Downloads
- 97
- Likes
- 3
- Rating
- 0
P
Printablesonorinbejasus
The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (with shell!)
A small remix on The Observatory to fit a MBP M1 Pro with an attached plastic shell. I expanded the opening to be 19mm across so that it snuggly hugs my MacBook Pro.
- Downloads
- 91
- Likes
- 6
- Rating
- 5
P
PrintablesChristina Schwarz
Absetzkontainer 7m³
Kann als Aufbewahrung verwendet werden. Ebenso selber in der Größe skalierbar. Ich habe es für einen Kunden erstellt der in der Baubranche Tätig ist und seinen Schriftzug außen haben wollte als Werbegeschenk.
- Downloads
- 88
- Likes
- 3
- Rating
- 0
P
PrintablesTomishape
Obsession with geometry - Organiseur de bureau
L’utilisation du motif triangulaire sur ce design, m’est venue après l’avoir utilisé sur un précédent modèle, la boîte à bijoux Pearl. En effet, en imprimant le dessous d’un modèle sur quelques millimètres et ensuite, toujours sur…
- Downloads
- 78
- Likes
- 15
- Rating
- 0
P
PrintablesBen Dansie
Nuroh Gribsek - Head Sculpt
The ever cheerful Nuroh Gribsek. Currently reworking in to a full character. :) Quick bit of weekend fun in Zbrush. Printable without support.
- Downloads
- 68
- Likes
- 5
- Rating
- 0
P
PrintablesBen Dansie
Nuroh Gribsek - Master Blacksmith
A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. Tested fine with FDM and…
- Downloads
- 65
- Likes
- 5
- Rating
- 0
P
Printablesfixumdude
Subsector3D Birthday Model
Star Trek theme badge model created for Subsector3D's birthday 2023. Designed with different heights to allow for color changes if desired.
- Downloads
- 61
- Likes
- 34
- Rating
- 5
P
PrintablesCiccioPuzzo
H0 GM Aerotrain Coach-Observation
This is a rare-to-find model in the world of H0 train modellism. It's the last coach of a famous “design” train produced in 1955 by american GM, called Aerotrain. More on Aerotrain (GM) - Wikipedia The model has highly detailed interiors…
- Downloads
- 60
- Likes
- 5
- Rating
- 0
P
PrintablesScalda
3D Mystery Box Project july 2019 - indoor temp/humdity sensor with webserver
HI, Here we have the full project files for the July 2019 3D Mystery Box, This is an indoor temp and humidity sensor, the case is just one someone designed hence the remix as it works extremely well. You will need to add these libraries…
- Downloads
- 57
- Likes
- 6
- Rating
- 0
P
PrintablesBooks
Chandra X-ray Observatory
Public domain model of teh Chandra X-ray Observatory from the Smithsonian Astrophysical Observatory. Originally uploaded to the Smithsonian 3d digitization archive .
- Downloads
- 57
- Likes
- 9
- Rating
- 4
P
PrintablesBen Dansie
Multipart - Nuroh Gribsek - Master Blacksmith
A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. This remix is split in to…
- Downloads
- 56
- Likes
- 10
- Rating
- 0
P
PrintablesLuis Geissler
Abandoned Observatory - Diorama
A friend of mine is celebrating his birthday soon, and since we often play DnD together, I wanted to give him something related. When we play, he always takes the role of the game master, and since the game master has to roll dice most…
- Downloads
- 56
- Likes
- 21
- Rating
- 0
P
Printableskent
PanzerObserver 2.4 Camera offset mount. Remix for OV5640 Camera
For gantry mounted OV5640 Camera on Voron 2.4. It offsets the camera under the gantry so it won't be blocked by the X axis
- Downloads
- 56
- Likes
- 11
- Rating
- 0
P
PrintablesAlwin Oz
Window frame for acrylic/plexiglass observation window for a 3d printing enclosure
The Window size should be the same as the bottom frame layer & should be able to hold it. Use petg for heat-resistance. I cut a hole in the wood a tiny bit smaller than the window, i measured the acrylic would fit in the frame of the 3d…
- Downloads
- 54
- Likes
- 9
- Rating
- 0
P
Printables3Dag
REMIX OF PIKACHU - XMAS REMIXABLE BY PRINTEDOBSESSION
Remix of Pikachu - Xmas Remixable - Fan Art by printedobsession aqui el link de su modelo original:…
- Downloads
- 53
- Likes
- 12
- Rating
- 0
P
Printables3D Mechman
Atakule - Communication and Observation Tower in Ankara, Turkey
Atakule is a 125 m (410 feet) high communications and observation tower located in the Çankaya district of central Ankara, Turkey, and is one of the primary landmarks of the city. As the district of Çankaya is itself on a hill, the tower…
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
PrintablesIvoryHammer
Rollercoaster Tycoon Observation Tower
Observation Tower from Roller coaster tycoon 1/2
- Downloads
- 50
- Likes
- 7
- Rating
- 0
P
PrintablesRutgerM
Sign to indicate: absent, present, do not disturb, silence
Three different parts that fit together to form a do not disturb sign with four messages. Currently in Dutch and English. Print one out of the two middle circles. The middle ring should be printed in two colors. The last 0.2 mm layer…
- Downloads
- 47
- Likes
- 7
- Rating
- 5
P
PrintablesDennis Matl
Walthers Oscar Observation Car
Print files I used to create my version of a Walthers Oscar observation car. It is printed in HO Scale Printed on a Mars 2 Pro. Generic plant based grey resin. Standard settings. Printed at 45 degree angle. Look at the attached pictures…
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesKick1Fire
Stickwoman Observatrice
Découvrez le modèle 3D de la Stickwoman Observatrice, une représentation curieuse et attentive d'un personnage féminin emblématique dans une posture d'observation. Ce modèle ludique et minimaliste est conçu pour être imprimé en 3D,…
- Downloads
- 42
- Likes
- 14
- Rating
- 0
P
PrintablesMinus One
The Living Observatory
What if an entire civilization lived on the back of a giant turtle? That single idea became this fantasy scene, complete with glowing crystals, waterfalls, and a miniature observatory. This is exactly the kind of creativity I love…
- Downloads
- 41
- Likes
- 35
- Rating
- 0
P
PrintablesBuildersMark
Observatory
Observatory had print in place axis to lean the dish
- Downloads
- 41
- Likes
- 6
- Rating
- 0
P
PrintablesTom B
Ikea OBSERVATOR Bracket for Closetmaid Wire Shelving
This bracket was designed to allow an Ikea OBSERVATÖR wire basket to be attached to a ClosetMaid Close Mesh Wire Shelf. These baskets can be had for around $3 USD, which is a bit cheaper than the ClosetMaid version of these baskets. Feel…
- Downloads
- 40
- Likes
- 11
- Rating
- 0
P
PrintablesNolando
Obsession Gentry Card Divider/Insert
This is a simple insert for one of the purple boxes included with the second edition of Obsession to separate the gentry cards. It leaves a little extra space for other tokens or cards as well. This insert works with sleeved cards (here…
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
Printablesfo43
PRR POS21 Interior for Rivarossi Observation Car
Drop-in interior for the Rivarossi Streamlined Observation Car, of the Pennsylvania Railroad POS21 class observation sleeper car. Based on Pullman plan 4133,…
- Downloads
- 39
- Likes
- 3
- Rating
- 0
P
Printablesxchgre
Chandra X-Ray Observatory
NASA's Chandra X-ray Observatory is a telescope specially designed to detect X-ray emission from very hot regions of the Universe such as exploded stars, clusters of galaxies, and matter around black holes. Because X-rays are absorbed by…
- Downloads
- 39
- Likes
- 21
- Rating
- 5
P
PrintablesDennis Matl
Walthers HO Observation Railing
Railing for my Oscar platform. Designed to be printed in resin. Can be added to platform and printed as one piece. You will need a steady hand to paint it as an assembly.
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesStolle
Anhänger für den Rucksack "Bitte nicht schubsen, habe Bier im Rucksack"
Hier findet ihr einen Lustigen Anhänger für euren Rucksack, Er kann an ein Gurtband oder ans Molle System befestigt werden. Es sind STL in deutsch, englisch oder auch ohne Beschriftung vorhanden.
- Downloads
- 38
- Likes
- 16
- Rating
- 0
P
PrintablesCh'marr
STOP Think Observe Plan
Print in red. Change to white for the last few layers. Made this way back in 2020. Remember 2020? I wish I didn't.
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesSteedMaker
Chamber Observatory
A nature observatory but it could be used as a temple or a chamber. Check out this 360 video to get a better sense of what it might be like to be inside the structure. Print Settings Rafts: No Supports: No Resolution: Hires Notes: I think…
- Downloads
- 36
- Likes
- 12
- Rating
- 0
P
PrintablesDanAndersen
Stabilizer for Kosmos Sea Dogs / Urzeitkrebse Starter-Kit
The “aquarium” added to the starter box of the “Urzeitkrebse” or Sea Dogs by Kosmos is prone to tip over - especially for the young kids who are the typical owners of the triops like sea dogs. The kit can be bought for around 10 Euros at:…
- Downloads
- 36
- Likes
- 4
- Rating
- 5
P
PrintablesBoardgamefun
Obsession Card Holder
This is a card holder for the board game Obsession 2.1E The card box fits inside the card-board-box that comes with the game. It has deviders for each card type of the game. Important: sleeved cards will not fit! The second box is for the…
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
Printablesheartprinter
Abseil-Acht zum Üben | figure-eight descender
Ein Abseil-Achter zum Üben von Routinen. Ist nicht der schönste, aber erfüllt seinen Zweck. ca. 13 cm hoch und ca. 7,5cm breit.
- Downloads
- 34
- Likes
- 4
- Rating
- 4.67
P
PrintablesErwinDesmond
![Ender 3 (and subsequent versions) nozzle wiper [REMIX]](https://media.printables.com/media/prints/738323/images/5768852_1b514a82-eb1a-4106-a2a5-81b1a0dfadf2_bce9c690-aa87-4049-9bec-bbc8bbf10310/20240126_034018.jpg)
Ender 3 (and subsequent versions) nozzle wiper [REMIX]
Modified version of a design from racustomworks (cults3d.com). Made the Brushholder, more compatible for silicon brushes. Made the walls thicker for sturdyness. and added larger radius on the corners. Changed the bracket to be more…
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
Printablesherbert
Dice with colored pads - Würfel mit Farbseiten
A simple dice with cylindric wholes on the surfaces to be filled with the colored pads. Instead of colored pads you can also use other zylindric elements with icons, letters, digits, etc. Ein einfacher Würfel mit zylindrischen Öffnungen…
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
PrintablesAbnormAnomaly
Magnetic Clip for Remix of Obsessively Accurate TNG Starfleet Combadge V2 - 2360s
This is only the gold back portion of the model with places to glue in two magnets and a magnetic clip so you can wear it. You can find the rest of the files on the original model. Print these 2 pieces and the black and silver pieces of…
- Downloads
- 31
- Likes
- 11
- Rating
- 0
P
PrintablesLowPolyFigures
Low Poly Telescope Observatory Small
Low Poly Telescope Observatory Small
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesHaggiwatt
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesAlgol
Universal 3D Printable Solar Filter Holder for Camera Lenses - 79mm lens (for Eclipse or observation)
Description: This is the 79mm filter; for 105 go here: This is a modular 3D printable solar filter holder designed for DSLR and mirrorless camera lenses. The design consists of two main parts: Base Top retaining ring Together they…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
Printableslayer.works
Partial Eclipse Phenomenon Observation Tool
During a partial solar eclipse (or the partial phases before and after a total solar eclipse) certain phenomena can be observed using this tool. Print this shape and hold it in direct sunshine where the shadow is cast onto the ground or…
- Downloads
- 29
- Likes
- 3
- Rating
- 5
P
PrintablesAlgol
Universal 3D Printable Solar Filter Holder for Camera Lenses - 105 mm lens (for Eclipse or observation)
Description - This is the 105mm filter; for 79mm the link is here: https://www.printables.com/model/1796737-universal-3d-printable-solar-filter-holder-for-cam This is a modular 3D printable solar filter holder designed for DSLR and…
- Downloads
- 28
- Likes
- 4
- Rating
- 5
P
PrintablesPhilDotC
Collapsible 1.4m Radio Telescope for 1420MHz Hydrogen Line Observations
My design was inspired by a radio telescope I saw that was made out of an umbrella style photographers light reflector. It was less than 1m in diameter and the EMF fabric was stuck on the inside. I thought it would be much neater (and a…
- Downloads
- 27
- Likes
- 11
- Rating
- 0
P
Printablessilence
Erbsenschote Schild/Pea sign
Ein Schild, dass man in den Boden/Feld stecken kann um nicht lesenden Kleinkindern beizubringen, dass auf dem Acker Erbsen angebaut werden. Ich empfehle die Verwendung von Stützstrukturen. A sign to indicate peas being grown in the field…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesRob C
A toy train I made for a friend's train-obsessed child
This is a toy train engine for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Downloads
- 25
- Likes
- 6
- Rating
- 0
P
PrintablesMatej Pašák
Bee house with transparent wall for observation
Students will design, print and assemble a bee house with a transparent wall that allows the development of solitary bees to be observed.
- Downloads
- 24
- Likes
- 10
- Rating
- 0
P
Printablesomgwtflolbbq
Walker Observer Droid
Inspired by the Walker Observer Droid by The Droid Foundry I love their little robot designs and wanted something similar that was easy to print.
- Downloads
- 23
- Likes
- 8
- Rating
- 0
P
PrintablesNovel Tinker
Obsession 15 UC secondary mirror cover
Print is simple and will probably work with any reasonable settings. Print flat side down for both parts. I printed mine with a 0.6mm nozzle at 0.3mm layers in black Overture PLA. The threads are a little tight intentionally so they don't…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesHot_Dog_Head-
Object of Obsession Charm from DBD
“He was watching me!” -Laurie Strode Category: 3D Printing
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesSimon
Haken für Siku LKW mit Absetzmulde 1695
Siku LKW mit Absetzmulde 1695
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
Printablestabicat
Obsession board game first player and round tracker pawn marker
This is the pawn used as a first-player marker and a round tracker for the board game Obsession. If you lost (or just don't like the color or size) either of the these markers, just print another one! Be sure to print with Seam Position…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesAlexander Hock
Schlüsselanhänger Abseilachter
Dies ist ein Schlüsselanhänger von einem Abseilachter der in der Kletterei normalerweise verwendet wird. Nicht fürs die Klette Anwendung geeignet
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesJacopo Bozza
Herschel Space Observatory
Herschel telescope studied the formation and evolution of stars and galaxies. Also, it observed from the far-infrared into submillimetre wavelengths, bridging the two. I created this model on Autodesk Fusion using Herschel's photos and…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesShane Kerr
BSEED Zigbee EU outlet wall plate
I wanted to Zigbee outlets so I could track energy usage without using plugs. I ordered some from BSEED, and they are great. Unfortunately the plugs are 50mm × 50mm, instead of what I think is the standard 55mm × 55mm. The outlets I…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesRob C
A toy train flat car I made for a friend's train-obsessed child
This is a toy train flat car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Downloads
- 18
- Likes
- 7
- Rating
- 0
P
PrintablesSteve Genoud
Observation window for a pinhole camera
I didn't plan ahead to buy eclipse glasses, and by the time I looked, there were none left. So I built my own pinhole projector using a cardboard tube, aluminum foil, and this screen window template. Sizing the pinhole: There's a small…
- Downloads
- 18
- Likes
- 4
- Rating
- 5
P
PrintablesStadsgaard
Feinstaubsensor case
This is a box for a sensor.community compatible particulates sensor. It supportes the SDS011 and NodeMCU and BME280. The case is not watertight, but almost. There are openings to let airflow into the sensors. 9 3mm screws to hold all the…
- Downloads
- 18
- Likes
- 0
- Rating
- 2
P
PrintablesCrescent_Dawn
Man Portable Observation Unit - A2
Simple printable flying wing uses two 9g servos, one a2212bldc, and an electronics package of your choosing. Print all of the parts at no top or bottom layers and one perimeter with no infill. DO NOT USE VASE MODE
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesMohammed Hijaz
8x and 16x Cuvette Holder with Observation Hole
A small Cuvette holder with 8 slots designed to be easy to carry around the lab. It includes observation holes for each cuvette so its easy to check if it has been filled up from the side as well as from the top. The two rows are…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesMakerBees
SubSector3D
Size and errors have been fixed, sorry about previous issues. Thank you for the chance to contribute to the Reptile Show.
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesKiwiDamo
Kolink Observatory HF Mesh PC case plate
The Kolink Observatory HF Mesh PC case has a large gap in the side near the power supply. This plate snaps into place to cover it. For the white case in the photos, I added the users name to the plate. Print Details 0.2mm layer height…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesRob C
A toy train tanker car I made for a friend's train-obsessed child
This is a toy train tanker car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesRob C
A toy train hopper car I made for a friend's train-obsessed child
This is a toy train hopper car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. ***check my profile to see the other cars in this set!***
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesLowPolyFigures
Low Poly Observatory Control Room
Low Poly Observatory Control Room
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesRobo-san
Rosalina Amiibo stand: Comet Observatory Library
An Amiibo stand inspired by the design of the Comet Observatory Library. Specifically designed for the large “Super Mario Galaxy / Rosalina" Amiibo.
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesHermannTheGerman
Sockel für Zugspitze und Eibsee Mountain relief
Ein kleiner Sockel mit und ohne Schriftzug
- Downloads
- 15
- Likes
- 2
- Rating
- 5
P
PrintablesRob C
A toy train I made for a friend's train-obsessed child
This is a toy train engine for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
Printables#Petter3D
Holder for Impact Subsea Depth Sensor
This is a mounting bracket for a ISD4000 Depth Sensor from Impact Subsea. It may also fit some of the other sensors from Impact Subsea. Print with 100% infill
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesMoWeBo
Obsession Big Box Inlay for Cards
The german version of Obsession (basic without expansions) has some smaller cards, so i created a simple inlay for one of the big boxes inside. For the family boxes i used this one from jscherpelz . Category: Games
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printables#Petter3D
Holder for Impact Subsea ISS360 Sonar
Simple holder for Impact Subsea Sonar - ISS360 This will not fit the Impact Subsea Sonar - ISS360HD
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesJeroen3
Cross-brace for GERTON using OBSERVATÖR
Print 2 pairs out of PETG with 0.4 or 0.6 nozzle, increase perimiters to at least 4, infill default or 100%. Additional parts required for one cross-brace: 1x IKEA OBSERVATÖR 4x M4x20 Hex 4x M4 Hexnut f3d file included to adjust to custom…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesServError
Ranger EX and Quanum Observer better wheel hubs
Edit - Added V2 with better support on the sides and slightly better fit to prevent the wheels from wiggling in place. Replacement wheel hubs for the main gear of the Ranger EX from voltanex. The original hubs are pretty soft and weak and…
- Downloads
- 14
- Likes
- 0
- Rating
- 0