Counting matching models…
==== CZ ==== Běžná nábytková úchytka na skříň nebo šuplík ve skříni. Rozteč děr: 96 mm, Rozměry: 104 x 26 x 11 mm Rozteč děr: 128 mm, Rozměry: 136 x 26 x 11 mm Rozteč děr: 160 mm, Rozměry: 168 x 26 x 11 mm Díra na vrut: průměr 3mm Tisk:…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Homer Budha .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10cm Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar This…
Print model IO shield for Gigabyte GA-B320M-S2H
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
Unleash your inner Rambo, with this trip wire boobytrap, pulling the ring out of the end releases a hammer that detonates a snap cap from a cap gun. only requires 3 small parts, a rubber band and come caps. This can be strung across a…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
A very big thanks to TBone for having created this model in Pepakura, Check out the link http://53rdfac.proboards.com/thread/969/galactic-marine-pepakura You can also down load this and other pepakura models from TBone9600's link below…
Pant nábytku – opakovatelné otvory 26mm
Knob designed with attention to the best possible grip comfort. Turn the knob by 45°, depending on your prefered grip position. Hole for screw with included M4 thread. Print instructions I used PLA, but any material will do No supports…
Hex design Toolstand V1 for 7 RC / Hobby Tools / screwdriver with parts tray. If you like my designs and if you want you can support my hobby by clicking the links below and maybe you want to buy some tools for this tray. Please don't…
Gigabyte AORUS logo transfered to STL territory.
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
Rear Io shield for the Gigabyte GA-H97-HD3
replacement io shield for A520M DS3H Category: Replacement Parts
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
a low profile 4 video output bracket for the gigabyte 1650, there are no 4 output designs only 3 outputs, so I made on Print as densely as possible if possible with PETG or ABS because the low profiles are hotter, check that the screw…
It's a mix of 2 things. 4946834 + 5039701 = this remix (5196877) ===update/add==== 01.17.22 : add stl for TBS fusion VRX Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter Supports: Yes Resolution: 0.12…
Support piece I made for my Gigabyte Vision 3070 to stop it from sagging. It may work for other GPUs. Default Height between GPU and PSU Shroud is 80.6mm. Default card width is 101mm. Fusion 360 file attached.
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
🇺🇸 Welcome to Denver, the Mile High City! MiniWorld3D's founder Dany Sánchez lived in Denver for some time and created several models representing landmarks of the city. The Central Presbyterian Church of Denver, Colorado is a historic…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas pant, panty na ruzne skrinky, krabicky, truhly,... prostě na ruzný nabytek dle Vasich predstav. Tisknuto bez podpor…
moddied gpu bracket, to fit gpu and psu
Fits this and probably similar motherboards
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
* Update 1/22/22 * Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere. * Update 1/17/22 * Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to…
This model uses the following parts: Parts 100 RPM motor 12V AC Adapter 12V Panel Mount Barrel Jack Speed Controller Canopy Ties Heatset Inserts 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp) 1…
FPV camera adapter 19mm to 26mm. Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design but included as an STL), the original can be found here -…
Today my Fatshark Sharkbyte fpv bundle arrived. Unfortunatly the fan-mount for the reveiver unit was missing so i had to print one by myself. I´ve testet the fan-mount on Fatshark Dominator HDO2 goggels and Fatshark Dominator HD3 goggels.…
Czech Potřeboval jsem atypické klínky pod nábytek, a protože jsem je nenašel, tak jsem jich několik vytvořil v několika rozměrech. 40x8x10 mm 40x10x8 mm 40x15x10 mm 50x8x10 mm 50x10x8 mm 50x15x10 mm 80x10x8 mm 80x15x8 mm English I needed…
My backplate for Gigabyte motherboard B450M DS3H (rev. 1.x). Number of walls 3, layer height 0.2 mm, infill 15%, 0.4mm nozzle, no supports.
I built a computer for my father a few years back that was missing an IO-Shield. I figured I might share. Also includes a Rick Silhouette with “Peace Among Worlds” :D Fits this Motherboard: Gigabyte-B250M-DS3H…
Dvoudílná cívka na zbytky filamentu. Díky možnosti rozšroubování lze jen nasadit už smotané zbytky filamentu bez nutnosti převíjení. Úzká varianta má zhruba poloviční šířku než široká. Velká cívka má prostor pro filament asi 2x vyšší než…
I modeled this shield after the motherboard dimensions. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. The photo was taken before…
Couldn't find a case for this obscure Meshtastic compatible board, so I made one, here you go. Autodesk Fusion and STEP files included, remixes welcome. Hardware required: 2pcs. M2 screws + heat set inserts (the case snaps together,…
An IO Shield replacement for the Gigabyte B250M-DS3H based of Paul Bibb's model
Nábytková noha. Koukněte i na mé další modely .
BACK PLATE 3D PRINT 2 COLORS AND LASER CUT TO ADD ARGB LIGHT
used regular .2mm print profile print with supports backplate is optional
A sliding hard drive rail for 3.5" drives. This is an extended length version designed for primarily for shucked disks which only have 2 instead of the typical 3 screw holes on either side. The rails which are included with the cases I…
Again a classic second hand case, the motherboard arrived but not the io shield. I made a simple drawing on Tinkercad and tested it, it's not perfect but it will work. Use it as you want completely free :)
I made a vertical stand for my BRIX PC. I use a GB-BER3-5400, but some other models should fit too. It should print fine with supports enabled. The fit on my machine is great, just slightly snug. The part does not fall off the PC when…
Asus ROG - AORUS Gigabyte Keychain - Alienware Dell - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you…
I designed this extension to turn a gigabyte brix mini pc into a pfsense router. I will add more details at a later date. Just posting it to share with someone.
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
Made an IO shield for a Barracuda Web Filter 310 (BYF310a) and a Gigabyte H110M-H motherboard. It might fit other Barracuda devices and can be a good starting point for customizing it to other motherboards as well. Instead of designing…
Make the perfect addition for your desk with this stylish dock for your hard drive! Built specifically for the WD My Passport external hard drive, our dock gives easy access to put your drive in and take it out easily. Our dock is open on…
❣I had come into a Gigabyte G1 Sniper Z87 Motherboard, unfortunately it was without the I/O shield. I modeled this one up as a replacement to use the board in a build. Unfortunately, I didn't take any pictures of it installed while I had…
I designed these brackets to mount a Gigabyte Aero Geforce RTX 4090 in a Hyte Y60 case. The standard vertical mounting position for this case will leave the RTX 4090's fans pressed very close to the glass, which restricts airflow. This…
0.2 mm 1-5 layer blue 1mm 6-10 layer red 2mm 11-15 layer white 3mm 16-20 layer gold 4mm
mobo io shield Category: 3D Printing
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
I designed a small wallart of Gigabytes Aorus logo. It has a raceway for a RGB LED Strip (see pic 2) and four mounting holes for screws. Its dimensions are 290x295mm so it can easily be printed with a 300x300 mm 3D printer. I highly…
Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 🚃UPDATE: doplněn model se spřáhly na obou stranách pro spojení více lokomotiv Všechny modely zde: BabyTrains Kolekce od autora Ondřej Kabelka |…
for vent and/or cable cover, diameter 60mm and 106mm
These are the parts I have come up with so far for the Five33 switchback HD frame . I am flying with Sharkbyte so I won't have any DJI designs in here. The original VTX antenna mounts will work for this frame as well. You can find them on…
Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 🚃UPDATE: doplněn model se spřáhly na obou stranách pro spojení více lokomotiv Všechny modely zde: BabyTrains Kolekce od autora Ondřej Kabelka |…
A remix from Tiny Compliant Fidget Toy This multi-stable mechanism has 256 different states. It's a physical byte , and it's equivalent to an 8-bits DIP switch used in electronics. As the author of the original design says, bistable…
Nábytková noha s nastavitelnou výškou a skryté vruty
My ID card holder was broken, so I designed and printed my card holder. I like Japanese patterns, so I tried designing card holder with Asanoha, Shippo and Seigaiha patterns. My printer is Mini+, so I tuned setting to print by Mini+ with…
Inspired by optimumtech's recent YouTube video, I decided to also try a 4060 LP build. However, my printer isn't tuned in right, so I needed something that is a bit less fragile and very easy to print. I also didn't want to use a riser,…
Nábytek pro panenky, stůl je tisknut nohama nahoru, židle vyžaduje límec a podpěry. Tisknuto s PLA
Firstly, a disclaimer: This is my first serious project made in CAD software, I am a novice at this so the model might not be 100% perfect. I will be refining the design later on so any feedback is appreciated. Do this mod at your own…
EN: BabyTrains - Wheels (Kola) 🇨🇿 Česká verze níže 📝What is BabyTrains? Story here . Overview of All Models on Printables: BabyTrains MINI BabyTrains BabyTrains motorized for LaskaKit 1) Design M3 Wheels are designed to attach with M3…
Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 Všechny modely zde: BabyTrains Kolekce od autora Ondřej Kabelka | Printables.com Potřebný materiál: 1 ks Šroub M3x16 4 ks Šroub M3x12 2 ks Čalounický hřeb…
3mf ready to print.
A simple keychain model. In Slicer, you can set a double color in layers. I recommend printing only one perimeter. If you want a different name or place, send me a private message and I'll add the keychain here.
BOM M3 x L6 Screws (4 pcs) M3 x L8 Screw (1 pc) M3 x L4 x OD5 Heat-set Insert nut (1 pc)
EN: BabyTrains MINI - Locomotives 🇨🇿 Česká verze níže 📝What is BabyTrains? Story here . Overview of All Models on Printables: BabyTrains MINI BabyTrains BabyTrains motorized for LaskaKit Each (almost) loco is available in several…
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
Made this covers per request and got permission to publish. 3 versions with bit different logo designs. I printed them with clear Extrudr PETG on the bottom and black PETG on top. On the bottom parts I used a variation of the…
PCUSA Cross for you to use in any projects. Enjoy.
EN: BabyTrains MINI - Cargo cars a cargos 🇨🇿 Česká verze níže 📝What is BabyTrains? Story here . Overview of All Models on Printables: BabyTrains MINI BabyTrains BabyTrains motorized for LaskaKit Parts needed for 1 cargo car 🚃 : 1× Bogie:…
Adapter that will make this light ( https://princetontec.com/product/byte-tactical/ ) fit into the ACH Rhino Mount/NVG Mount. It uses a pen spring to pressure fit into the slot. Recommend to print in ABS/ASA since it's a part expected to…
Ich habe mir hier einen kleinen Halter für den Wickeltisch zusammengestellt, damit die Packung der Wattetücher nicht auch noch neben dem Wickeltisch rumfliegt. Designt habe ich diesen Halter passend für die Wattepads von Rossmann der Make…
Gigabyte GA-D525TUD IO Shield
GIGABYTE RTX 4070 Fan Filter Made this since I currently have an open bench setup. Requires 3x M3*6 screws Printed in PETG to test but may require a different filament for long term. You will need a 256x256mm bed or larger to fit this…
New version can be found here . Novou verzi najdete zde . Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 Model lokomotivy inspirovaný legendární českou hrou Hra Vlak (The Train). Všechny modely zde:…
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
FPVCycle Babytooth (https://fpvcycle.com/products/fpvcycle-babytooth-frame-choose-your-thickness) Canopies for everyone! :D Various versions with different Antenna mounts!
@6d6178 @snail Challenge accepted. This attached STL contain all of the required 80 bytes STL file header and 4 bytes reserved for unsigned integer. This is CAN NOT be printed nor sliced, But can be examined to ensure it contains the…
You will need: 4 × Noctua NF-A4x10 12V PWM fans (for both ASUS and Gigabyte versions) 1 × M2 self-tapping screw (only for the Gigabyte version ) You need to modify the fan cables — please check the pictures I uploaded. I made a custom…
This is a logo plate I made for someone as a custom led logo. With permission to publish this. Print settings: bottom part is 3mm, should be printed with clear filament, I used Extruder PETG. Top is 1mm black PETG. Use M600 to change the…
Requirements: 4x M4 threaded inserts 1x Included VESA mounting plate and bolts I printed mine in Bambulab PLA-CF and it works very well. The power brick will be sticking out of the back, as it is otherwise too long to fit without the…
Meet BYTE — your compact companion from the Spindlelands! Byte is a utility-class ModBot built for scanning, scouting, and assisting with field diagnostics. This free model kicks off the ModBots universe — a world of post-industrial bots,…
EN: BabyTrains MINI - Bogies 🇨🇿 Česká verze níže 📝What is BabyTrains? Story here . Overview of All Models on Printables: BabyTrains - Coupler (Spřáhlo) BabyTrains - Wheels (Kola) BabyTrains MINI - Bogies (Podvozky) BabyTrains MINI -…
I/O Shield For Gigabyte GA-H170N-WIFI motherboard
Compatible ioplate for motherboard Huananzhi x79 Deluxe
Bracket for mounting Gigabyte RTX 5060 LP
Just trying it out, if it gets 20 downloads i will post more
