Counting matching models…
I needed a flashlight holder for wurkkos FC11 for my chest pouch at work so I made one. printed with petg. has a hole for a magnet to help but work with out it. Print it standing up otherwise the clip is not strong enough to bend and…
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
This is a remix of the original “Intel NUC 12 Pro Innodisk EGPL-T101 cover and accessory port kit” , adapted to fit a FENVI 10GbE module based on the Marvell AQC113 chipset . I built this because I wanted a small, quiet and…
I've married DC115 plate with pins that fit the DC charger with Wall Control back plate.
A remix of the 22mm version to fit a 16mm pole (e. g. Homebox Q80+)
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
New version with better fit and thicker walls for more strength. This is for any printer with a door that has a gap at the top of the door. Mount for a Tapo C101, C110, C111, or C110P2 camera.
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
I needed a long nozzle to fit into narrow areas, so I made one. It seems to keep a good seal around the insertion point and keeps good vacuum. Below are the settings I used. These are only a recommendation as this will probably print with…
This case has an opening in the back to allow space for the pins for when using it without the flipper.
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
External Tapo C110 mount for the QiDi Q2. Mounts on the upper hinge. Angled to aim camera 20 degrees down and right. Replace the two original (M3x8?) button head cap screws with a pair of M3x10 ones. I recommend printing in ASA with the…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…
This holder accommodates 11 additional C115 or C210 soldering iron tips and fits into the Aixun T3B ( https://s.click.aliexpress.com/e/_c3ODuVJl or https://amzn.to/4d6iHwA ) soldering station stand. Do not change the orientation, or the…
Overview A lightweight adapter plate designed specifically to mount the Depo Peresvet 140C11 Mini-PC to a standard VESA 100x100 monitor arm or bracket. Since the original mounting holes on this PC have non-standard dimensions, this…
A mounting plate for the Tapo C111 camera. This was created so I could mount the camera indoors to an existing wall speaker mount.
An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also. Height = 15.5mm Diameter =…
Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins
This adapter is made to fit JoshZ's camera mount . If you need the actual 3d model file from Fusion 360, please ask for it in the comments. Print settings: 0.2mm Layer Height 10% Infill Snug Supports increase print speed to 255% on the mini
Diese Klemme ermöglicht die Befestigung der Tapo C110 Webcam am Z-Motor eines Prusa Mini 3D-Druckers. Die Halterung enthält eine Kugelaufnahme für flexible Ausrichtung. Zur Montage werden eine M3-Schraube (mind. 25mm Länge) und eine…
Designed a holder to attach my Wurkkos FC11 to a mount from a broken bike light and it came out really nice with lots of grip (holds firmly even on pretty rough terrain) When I looked for files for a holder I didn't find any, so I'm…
Weather station case for an esp32 D1 mini and a RF receiver. Project repository for the hardware: https://gitlab.com/raupulus/esp32-weatherstation-bresser-read-868mhz-cc1101
TP-Link Tapo C110, Home Security Wi-Fi Camera
A generic bracket that connects to where a Celestron finder scope would normally connect on a C11. I believe the C9.25 also uses the same base. Out a M3x25 nylon flat-head screw through the knob and a nut in the recess of the knob, then a…
Small pet enclosure mount for the Tapo C110 camera. You do not have to modify the camera at all, simply remove it from the existing shell, put it inside this shell, and then place the cover from the original shell onto the new shell. This…
Tapo camera mount. Mount as you need: double-sided adhesive tape, magnets, screws, cable ties, zip ties Magnets holes - 10 mm outer diameter, 5,2 mm deep
Covers and knobs for EC11. Knobs are compatible with half shafts.
Remixed from @MrNeedlemouse. I modified the bottom of the tight slim base to use four 5mm x 3mm magnets instead of the standard screw holes. This allows it to securely attach to magnetic surfaces without any vibration. At the moment, I…
The small camera that comes with the A1 Mini keeps failing on me. So I decided to get a different camera to monitor my print. But where to install it? I tested different configurations, but none held the Tapo C110 in a good position. Due…
Since I use TAPO C110 camera, I made simple holder for my MK4. Just put camera on.
Feet for the popular and affordable Raaco 126762 C11-44 small component storage cabinet. If, like me, you don't wall-mount your cabinet, these feet printed in a flexible filament like TPU will help stop them from damaging surfaces.
I had problems getting the inner ring to fit, and I didn't really understand the point of it, so I got rid of it. I also made it into 1 part, so it would no longer require glueing together/assembly. I did include the inner ring in case…
this is a thread protector that threads onto a mac11 large thread pattern theres 3 thread classes 1b is loose for 2b is standard thread 3b is a tighter fit and not named 3b
LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…
This base extension adds 20mm of distance between the wall and your camera that allows you to angle the camera more. The base mounts to the wall with the same screws as provided by the manufacturer via keyhole screw slots in the back. The…
Connector for BERNARDO BDC1100 mobile chip extractor (vacuum cleaner) for spiro pipe D=63 mm (pellet pipe). Króciec do mobilnego odciągu wiórów (odkurzacza) BERNARDO BDC1100 na rurę spiro D=63 mm (rura do pelletu).
I wanted a simple and affordable solution to monitor my prints, so I chose the Tapo C110 camera, the newer version of the C100. It’s a good choice - affordable, with a great app, and it supports RTSP streaming. For this remix, I based the…
1 x CC1101 module (https://aliexpress.ru/item/1005006427856868.html) 1 x 5v to 3.3 (https://aliexpress.ru/item/1005004680123549.html) 3 x 16x2,5 screws
Remix of case made by RJ019 with closed bottom. Two options with sharp and smooth edges. In case there is any upwards wobble that annoys you (might be there depending on how you have built the board) - add some support to the top of the…
This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…
Simple magnetic holder for Prusa Enclosure. After inserting the magnets, you can stick into the corner. It uses the Prusa magnets, size: 20x6x2. You need 2 pcs.
Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.
For a project of mine I designed couple of encoder knobs for EC11 rotary encoders , here are the specifications; For 20mm EC11 shaft lenght I made 13mm shaft slot Shaft/Post diameter is 3mm Knob diameter is 19mm Knob height is 20mm There…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
Hey Makers ! Looking for an easy and affordable way to mount a plug-and-play camera on your Prusa Core One? If, like me, you're not yet comfortable with ESP32, OctoPrint, and other advanced setups, I’ve got a simple solution for you!…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
This was designed on FreeCAD. The mount is simple. The octagon tangential diameter is 14 mm, and the spacing is 100 mm (4 spaces on Multiboard). I print it on it's side with tiny supports for the two pins that hold the charger in place to…
Bracket/holder compatible with TP_Link C100, C110, TC60 cameras and all those with the same mounting method (with 13.2 mm ball at the base). It can be installed with the original screws. ATTENTION!! Check that the ball at the base has a…
A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.
I needed a flashlight holder for wurkkos FC11 for my chest pouch at work so I made one. printed with petg. has a hole for a magnet to help but work with out it. Print it standing up otherwise the clip is not strong enough to bend and…
крыша tembed Магниты 8Х2 ММ Добавил пару отверстий для выключателя по запросам, если что то не совпадает пишите в коменты Я не тестил крышку с выключателем Если вам не подходит сторона выключателя B просто отзеркальте модель , она…
Introduction I wanted to reuse my budget-friendly Tapo C110 camera, which I originally bought for the MK4, with my Prusa Core One. This custom case allows for easy mounting in one corner of the printer, similar to the Buddy3D camera…
I've found this Tapo C110 Clip but it doesn't fit my pipe diameter. So i've modded it so that it fits a 25mm pipe, works like a charm! Credits goes to BlushTTV and his original design:…
There is 2 design one for the CTS 288 encoder with a 0.250-inch shaft and one for PEC11H encoder with a 6mm shaft . I've created two models: A 2-part version for single-color printers , which includes the knob and a cap to be glued into…
Work in progress version. Needs a few tweaks here and there, STEP files are included if you want to make changes. Hardware: M2.5x16 screws (ISO4762/DIN912) - 4pcs M2.5 heat set inserts, 5 or 6mm long - 4pcs M2.5x5mm flat head screws for…
I was having difficulty in obtaining a camera angle I needed with the included mount, and other mounts found online. A wall or obstacle of some sort always was in the way of getting that angle. So this model tries to move the mounting…
I've added the step files in case you want to make your own mounts or changes Use M3 5mm to 8mm bolts to hold arms together
I use a Tapo C100 camera because I could not wait for the Buddy3D Camera, CORE One. It installs with two or three neodymium magnets in the frontmost topmost left corner of the enclosure. It streams beautiful images in real time that can…
did a little remix and added bruce to the back of case for a little flair.
here is a cover for LilyGo T-Embed CC1101 that you can choose yourself what color it should be instead of the standard cover that comes with it when you buy it This also saves you from having to destroy the original antenna to retrofit…
Face down mount for Tapo C113 Indoor/Outdoor Camera. My application is mounted face down on the cover of a basement sump pump pit. The Tapo C113 is an inexpensive IP65 Rated camera so I think it's great for my application. The camera has…
This is a chassis guard to protect the chassis bathtub from collision against rocks, pebbles, kerbs and so on. This is particularly an issue when the front assembly is mounted in the highest (and default) position. This part fits right in…
Took the model from fkm492, added screw holes for the C1101. Keeps the module better in place, with the antenna weight.
Works well in pla but eventually cracked. CAD https://cad.onshape.com/documents/b5e944e98bbeb2218cca3fb7/w/f5194ccad21a5166bec21ca8/e/c6a09d00e29000777922fc20
Simple case which accomodates bith ESP32 S2 Mini and C1101, to be used for ESPSomfy-RTS. features: dimensions (L: 61.85, W: 25.95, H: 27mm) mount for C1101 with screw holes venting holes on each side supports for S2 Mini on both sides and…
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
Flashforge Adventurer 5M Mount for the TP-Link Tapo C100, C110, C101 Camera. I made this one as there was no way to put my C101 inside the enclosure, and I didn't want it attached to the door. This mount is designed to work even with a…
I made this spindle lock for my Tormach PCNC1100 but haven't had a chance to use it for broaching. Ended up printing a plastic part and when it fails I'll probably try it out. Yes it's plastic but it seemed pretty strong, I wouldn't think…
I use a TP-Link Tapo C110 camera to monitor my 3D printer. It has a fairly good picture and, thanks to the IR illumination, it can handle shooting in the dark. However, with the upgrade to the new Prusa CORE One printer, there was a…
The camera holder attached to the Centauri carbon glass door using the two screws on the top hinge. The housing is designed to reuse these screws so that no extra hardware is required. There are two versions of this model, a clean version…
A bracket to stick a Tapo C100/C110 to a window (looking ‘outwards’). It uses a single clip to snap the camera in, making it easily removable. I have tested this, and it holds up fine for the occasional removal, even though the layer…
The perfect camera mount for the Snapmaker U1 leveraging the mounting point for the U1s tophat. Since the mount is rubberized it also provides some vibration protection. Tapo C110 (2k) - https://amzn.to/3M1R4Lc Tapo C100 (1080p) -…
longer - L O N G B O I Can be very tight, consider printing at 101% for PLA
Will fit the ball of a Tapo C110 IP camera. See photos. Can be adjusted and added to other makes.
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
If you ever installed knobs with a screw on a D-Shaft encoder, you probably noticed that as such, the knob is not exactly centred on your encoder. Here is the fix for that issue, with this model you never have an uncentered knob again. If…
This is a remix of the original “Intel NUC 12 Pro Innodisk EGPL-T101 cover and accessory port kit” , adapted to fit a FENVI 10GbE module based on the Marvell AQC113 chipset . I built this because I wanted a small, quiet and…
I've married DC115 plate with pins that fit the DC charger with Wall Control back plate.
Kamera Halterung Tapo C100 C110 für Creality Ender 3 s1
Płytka ESP32 DevKit: Polecam wersję z portem USB-C dla wygody. Uwaga: Jeśli masz stare układy ESP8266, w tym projekcie ich nie użyjemy – nowa wersja komponentu wymaga ESP32, który jest szybszy i w pełni wspierany. Moduł CC1101 (868 MHz):…
A remix of the 22mm version to fit a 16mm pole (e. g. Homebox Q80+)
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
New version with better fit and thicker walls for more strength. This is for any printer with a door that has a gap at the top of the door. Mount for a Tapo C101, C110, C111, or C110P2 camera.
Case for the D1 mini clone and CC1101 with "rubber duck" antenna. Based on @RobinsBlog_de design, but I wasnt happy with a few things, such as the weird bottom and the hole on top not made for the rubber duck antenna. Using this to…
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
I needed a long nozzle to fit into narrow areas, so I made one. It seems to keep a good seal around the insertion point and keeps good vacuum. Below are the settings I used. These are only a recommendation as this will probably print with…
This case has an opening in the back to allow space for the pins for when using it without the flipper.
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
External Tapo C110 mount for the QiDi Q2. Mounts on the upper hinge. Angled to aim camera 20 degrees down and right. Replace the two original (M3x8?) button head cap screws with a pair of M3x10 ones. I recommend printing in ASA with the…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…
