Counting matching models…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The front D-Ring mounts are also 3mm holes. Behind the stinger is a…
A wall mount to the suit the Shimano EC8004 charger for the EP8 drive systems. This includes a small mount to neatly store the cable when not plugged in. It suits the chargers with the right angled plugs and has a cut out to easily slide…
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
The stepfile is only the left side. Just mirror the side for the other. printed without support.
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The D-Ring mounts are also 3mm holes. There is a 6.2mm W x 6mm H hole for a…
I liked the original design but it does not fit my Archer C6 V3.2 router so I designed this from scratch. This design should fit the A6 and probably C80 as well since they look identical to the my C6 V3.2. Check the photos for reference.…
Es gibt 2 Versionen: mit seitlicher Halterung und ohne seitliche Halterung. Aufrecht stehend drucken. Printer: Ender 3 /Prusa Mks3+ Nozzle: 0.4 Layer: 0.3 /0.2 No Support skirt
Mount for the Annke C800 Dome Camera.
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an HPI Venture there are also body mounts available here on my Printables Site. L and R mean left and right. Most parts…
Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
Wall Mount Husqvarna QC80 Charger
ENG: i didn't like the original piping that came with these filters. even extended it's to short for most of my aquariums. also I didn't like the air hose connector on the top. with one of these adapters you can connect 20mm piping to a…
Very specific. This is an I/O Shield for the Asus P4C800-E Deluxe motherboard. Print right side up with support. It's supposed to be a bit loose. Don't worry. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
a support for the TCL remote of my TCL TV the fit is tight , it's friction fitted to the remonte , you can print at 105% for a looser fit, the original freecad file is also included if you wish to alter it
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
This remix wraps the Guition 10.1" / JC8012P4A1C display in a clean, frame-style housing suitable for wall mounting or desktop use. What's in the download: Source: STEP files are provided so you can adjust the dimensions or mounting…
Please read full description from original.
This is a base for the New Annke c800 camera I91DM, you can tell if you have new version by the fact it has twist lock base and new style logo. I have created it to be deep so it can partially see my widows and also so the waterproof…
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
LC80 Body Mount for TRX-4M Bronco / Defender Compatible with: TRX-4M Bronco / Defender Tested with: Injora Universal LCG Frame (no K10 extenders) Disclosure no AI was used to make the model or design, but I used chat gpt to format my…
how to print Print on the supplied orientation. Enable normal snug supports (do not enable "supports on build plate only"). Remove the tiny supports with pliers. how to use magnetic version Do not use for overhead mounting. Use M3 4mm…
Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
Print in TPU. Glue to the rear lip of the rear inner fenders.
IF YOU DON'T HAVE A PRINTER You can purchase printed grills via Portals (international shipping availible). Let me know if you'd like to see different mesh design for sale at portals. I don't sell anywhere else. Voronoy Design, No logo -…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
General Description: L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer. Unfortunately, I sold the Venture, so there won't be any more parts. Maybe the ones here can help…
This has been a long time coming. While I love my Denon D1100's that I bought many years ago in Japan, the one thing that I always noted was how weak the build quality was of the plastic hinges, and my pair has broken in many ways and…
The only place in my apartment in which this 5G modem can have optimal reception (line of sight to the cell tower) is in a window on top of an unused radiator. Due to the structure of the wall below the window, wall mounting was not…
Print 4x with the split side down and supports on. Attach to the frame rails, then install the frame rails and glue the 3d printed parts where they meet.
Requires: - 2x M4 screws This print will also require supports. I also don't think I created this in the right orientation so you might need to adjust that so that the “ugly” side that touches the support is down and won't show when…
I like this screen but the battery always sucked and spares cost a lot. These models fix that problem. :) One holds a 3S 11.1V Li-Ion like the ZOP Power 11.1V 3000mAh 3S. The other holds 3 separate 18650 cells. DC5521 plug needs to be…
Kiwi nin KC8203 modeliyle uygun doğrama haznesi.
This is a holder for the MC801A box for hanging on the upper edge of the window, for better reception of the Wifi signal. After printing, I screwed two copper hooks to the upper part, which I made from copper tape. Then I hung the holder…
Parametric OpenSCAD design to generate enlarger masks for Durst Bimaneg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.
A cradle for the Edifier RC80B Remote Contol. Designed to be mounted on the side of a desktop with 2 wood screws.
🔋 Battery Cover for C80 Mini Fatbike (EN) Also check out my YouTube channel and support me by subscribing and possibly watching! 👉 youtube.com/@ElektroTechNL?sub_confirmation=1 For the C80 Mini Fatbike, I have designed a simple yet…
For some reason, MFG of this Omron Air Compressor Model NE-C801 made a mount for the inlet cup that doesnt actually work! So I used this existing mount edge to make my own mount! And added a little tube holder since I dont want my…
Model: This is an adapter I made which goes in the insert slot of the Kondor Blue Anti-Twist NATO rail and adapts it to the Canon C80's top handle rosette. I've personally tested it with the 2 inch variant, though I have no reason to…
🇩🇪 Deutsch Magnethalterung für das Guition JC8012P4A1C 10,1"-ESP32-P4-Panel. Sie wird auf die M2,5-Gewindebolzen des Panels geschraubt und hält es mit vier Topfmagneten hochkant oder quer an jeder Stahlfläche. Zwei Versionen: Zweiteilige…
So you can tow your big trailers with your sick rigs!
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
This is a holder for the MC801A box for hanging on the upper edge of the window, for better reception of the Wifi signal. After printing, I screwed two copper hooks to the upper part, which I made from copper tape. Then I hung the holder…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
For some reason, MFG of this Omron Air Compressor Model NE-C801 made a mount for the inlet cup that doesnt actually work! So I used this existing mount edge to make my own mount! And added a little tube holder since I dont want my…
This remix wraps the Guition 10.1" / JC8012P4A1C display in a clean, frame-style housing suitable for wall mounting or desktop use. What's in the download: Source: STEP files are provided so you can adjust the dimensions or mounting…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
Case for qs-1224cc80 dc step up converter module and other similar models. Pretty tough, not waterproof, though. Used as 12V car laptop charger. Features open radiator design, see-through hole for status LED and vents for internal…
Filter bracket for House vacuumcleaner VC8024 HEPA-filter. Easily resourced if you are living in Finland or in Estonia. Prisma grocery stores and S-Kaupat chain are selling their own brand vacuum cleaner's replacable HEPA-filters in quite…
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
I have ZTE MC801A1 5G Best covarage is at the Window so I made this design
