Counting matching models…
A 23 piece puzzle of the Swiss cantons based on a topographic relief map of Switzerland. Half cantons were fused into a single piece (AI/AR, BL/BS, NW/OW) and enclaves/exclaves mostly ignored. Scale is 1:1000000, base thickness of 3 mm…
A modification to falichs' Canton MX speaker mount to allow Canton 10-MX satellite speakers to be directly mounted to the wall. (I lost the original wall mounts) Design allows cable to be hidden inside the wall. Modified with tinkercad.…
Wandhalterungen für Canton Plus GXL und XL Lautsprecher. GXL passen perfekt, beim XL müssen die Kanten Lautsprecherseitig mit Sandpapier leicht angefast werden. Wall brackets for Canton Plus GXL and XL speakers. GXL fit perfectly, on the…
Wall mount: 2x Mushroom headed screws m4x40 2x wing nut m4 2x screws to fix the mount to the wall Ceiling mount: 3x Mushroom headed screws m4x40 3x wing nut m4 1x M6x 25 allen key screw 1x m6 hexagon nut 2x screws to fix the mount to the…
Mir passten die flexiblen Halterungen nicht, da sie mit der Zeit immer von sich selber verstellten. Durch das höhere Gewicht der Lautsprecher senkte sich der Lautsprecher nach unten. Deswegen eine fixe. Problem gelöst. für linke & rechte…
CANTON MOVIE 75 central speaker wall mount bracket (could fit other MOVIE models speakers if they have 100mm distance between rear screws). I made it as in the used set I bought it was missing Printed with PETG 0.2mm 50% infill.
This holder is made for CANTON satellite loudspeakers that are often included to dolby surround systems for home cinema entertainment systems. I designed them for our party cellar which has a 19-20mm strong wooden wall shroud panelling.…
A simple cover designed for Canton RS 2.130 Speakers. It clips on and should not fall of without using glue. Personally I'd recommend using a small amount of glue to fix them permanently. Printed with the top facing up for a nicer finish,…
Fixed Angled Ceiling Mount for Canton Speakers This is a sturdy, multi-part ceiling mount designed for Canton speakers. It features a fixed downward angle to point the speaker perfectly toward the room. Note: I designed this for a friend…
Modelo desenhado para encaixar perfil de alumínio, para e tela, com o objetivo de evitar mosquitos.
CANTON MOVIE 75 Atmos speakers wall mount bracket 30 degree angle witch wire through channel. Printed with PLA 0.2mm 30% infill, supports.
A bracket designed to attached a Canton 10-MX centre speaker to the wall. Design allows some space behind for the cable to enter the wall without being seen. Designed with Fusion 360. Print Settings Printer Brand: Ultimaker Printer:…
CANTON MOVIE 75 Atmos speakers ceiling mount bracket 30 degree angle. Printed with PLA 0.2mm 30% infill.
This is a little spacer block for evenly spacing out the 32 "rings" of LEDs in the Banggood RGB LED Canton Tower kit. ( https://uk.banggood.com/custlink/3vKYokPDv ) I'm making a series of videos detailing the process of building this kit,…
Sirve para evitar las rozaduras en las esquinas Hay que pegarla a la esquina, con por ejemplo "PATEX no mas clavos". IMPRESIÓN: Material puede ser PLA. Sin soportes. Tres o cuatro perímetros de pared.
Cantoneres de protecció per una pissarra magnètica
World Cup 2026 Hard Cover Album Corner Protectors Protect your FIFA World Cup 2026 hard cover album with these simple and lightweight corner protectors. Designed specifically for the hard cover edition, these corner pieces help prevent…
Case for the Canton LED Tower DIY kit From Bangood. Made in Fusion360. Printed in PLA Nozzle 0.4 Layer 0.2 I used support for the bottom holes to come out nicer Category: Electronics
This is for those who have their TV on a full-motion wall mount and want the soundbar mounted below and moving with it. Since I wasn't able to find a commercial solution fitting the rather widely spaced mounting holes on the Canton Smart…
Canton-Power USB DC-DC Step-Up Boost Converter Case / Obudowa do konwertera napiecia na USB
This is a custom 3D‑printed mounting hook system for the Canton Plus AV 700 center speaker. It’s designed for people who want their center speaker placed close to their TV without drilling into the wall , especially when the TV is…
These are a set of 5mm LED rings that I designed to replace the original top section of this 1 meter tall RGB LED tower kit ( the Banggood RGB LED Canton Tower kit. ( https://uk.banggood.com/custlink/3vKYokPDv ) ) These will mean that the…
This clamp will help you to mount your Canton Movie speakers to a drywall that is hanging from the ceiling. Ideally for positioning without drilling holes into your walls and hiding the cables.
This is a front grille for Canton Karat 200 speakers from 1986/1987. I found the speakers with walnut veneer and dark front grilles too dark overall, so I wanted my own grilles to provide contrast. There is a complete model (approx. 380 x…
This is a clean and precise 3D-printable model of the Canton of Zurich's official emblem , designed for multicolor printing via manual filament changes during the print process. The emblem features a simple geometric split of white…
This is a 3D-printable version of the Canton of Solothurn emblem, designed to be printed with a manual filament change for a clean, accurate two-color result. The flag features a white upper half and a red lower half , separated…
Lucerne canton emblem recreated with blue and white filament swaps to reflect the official Swiss heraldic design.
This is a 3D-printable model of the Canton of Schwyz emblem—one of the oldest and most iconic Swiss cantonal symbols. The design is optimized for manual filament swaps to cleanly reproduce its classic look: a solid red field with a small…
Dimensions: -45mm long -23mm wide -3mm thick with letters included
This is a 3D-printed version of the official emblem of the Canton of Zug , Switzerland. The design is optimized for filament swaps at specific layers to reproduce the emblem’s simple yet iconic color scheme: white and blue horizontal…
Éric Daniel Pierre Cantona — Buste Français Ce buste représente Éric Daniel Pierre Cantona, ancien footballeur international français devenu acteur. Inspiré de l’une de ses photographies les plus populaires, il restitue son regard…
This is a custom 3D‑printed mounting hook system for the Canton Plus AV 700 center speaker. It’s designed for people who want their center speaker placed close to their TV without drilling into the wall , especially when the TV is…
This is a front grille for Canton Karat 200 speakers from 1986/1987. I found the speakers with walnut veneer and dark front grilles too dark overall, so I wanted my own grilles to provide contrast. There is a complete model (approx. 380 x…
Fixed Angled Ceiling Mount for Canton Speakers This is a sturdy, multi-part ceiling mount designed for Canton speakers. It features a fixed downward angle to point the speaker perfectly toward the room. Note: I designed this for a friend…
Cantoneira 3 encaixes, com corte de 3mm, ideal para criar uma proteção para a impressora 3D. Medidas: 70x70x36
Cantoneira inferior 97x97mm, utilizada para criar estufa para impressora 3D.
Fixed Angled Ceiling Mount for Canton Speakers This is a sturdy, multi-part ceiling mount designed for Canton speakers. It features a fixed downward angle to point the speaker perfectly toward the room. Note: I designed this for a friend…
