68 models
Replica of the Pirates Of The Caribbean Gold Coin This model imported from Thingiverse. The model is based on javialam and remixed by cyclone . The remix includes two sided versions and a necklace holder. Other models which are very…
Pirates Of The Caribbean Gold Coin Medal, 65mm of diameter, so easy to print. I designed this using FUSION 360, I think it has better details and prints easier than other version around. If you scale it down, double check the perimeter…
🔵 Pirates of the Caribbean (Davy Jones key) 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/channel/UCn-fQH2--PRf4VltMLOjYcw ■ Video ➔ ■ Material - PLA ■…
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender. Next up is to make sails thick enough for a common 0.4mm nozzle to be…
Yarg, I took the original and made it double sided in Matter Control. It prints upright, I printed on a Kobra 3 combo with a brim. Cryoplate 50C bed temp with sport mode just fine matey. If one of ye land lubbers prints it without a brim…
Apparently hiding rubber ducks on cruise ships is a thing, so for my upcoming Royal Caribbean cruise I thought I'd make something special. I don't think this is what people mean when they talk about "Duck Boats". It has printed just fine…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I wanted to make a more screen-accurate version of the "Aztec gold" coins from the 2003 film “The Pirates of the Caribbean: Curse of the Black Pearl”. Inspired by the other model here…
I was looking for a generic cartoony cruise ship that resembled one from Royal Caribbean (with the Viking Crown Lounge surrounding the stacks), but couldn't find anything. As a last resort, I had ChatGPT create me a 2D caricature image…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Pirates Of The Caribbean Coin Coaster
A model of Davy Jones' key from Pirates of the Caribbean: Dead Man's Chest. If you want it to look more like the movie version with water damage you could try a darker filament with the "Fuzzy Texture" in Ultimaker Cura.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
PIRAT SHIP CARIBBEAN PIRATSKA LOD KARIBIK PIRAT
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
An MMU Royal Caribbean logo. PLEASE READ THE INSTRUCTIONS BELOW. Designed for the MMU or the Palette, it is not able to be printed in multiple parts and then glued together. Please post makes and remixes as it really inspires me to do…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Pirates of the Caribbean dead mans chest coin easy to print No supports all filaments are good for this print infill can be 15% and above keep the walls 3 layers and above Njoy Below is the link with all my designs…
Remix of https://www.thingiverse.com/thing:2430449 Category: Coins & Badges
this is the Mariner Of The Seas owned and operated by Royal Caribbean International. she is one of five Voyager class ships all i will be making in my quest to 3d model the royal caribbean fleet
MMU is not required for this version. The crown and anchor are printed separate from the base and then snap into the insets on the base. A little bit of super glue won't hurt, but the pieces fit in pretty snuggly, so it isn't required.
Made a plaque of the Royal Caribbean Logo for my wife to hang in the laundry room. Found the logo on Thingiverse. Added the plaque using Tinkercad. 4.mm nozzle. 15% infil Gyroid. I used PLA and used Prusa Slicer. To obtain 2 color slicer…
Have fun theres a logo and a crown hopefully you hide it is hard spaces and make someones day!! Let me know if you enjoyed it by writing a review!!
Here is Beacon Joe, from the Pirates of the Caribbean ride at Disneyland, CA. As you are sailing through the Blue Bayou Lagoon, just before you meet the Talking skull, He is on your left-hand side, sitting in his rocking chair, smoking…
Pirates Model Source - https://www.printables.com/model/309369-pirates-of-the-caribbean-aztec-gold-coin Avengers Model Source - https://www.printables.com/model/331847-avengers-logo Cars Model Source -…
I ended up finding drawings created by the prop house that made the Aztec gold coins used in The Curse of the Black Pearl. A desire to cast these in brass or bronze made me start modeling it in Fusion 360 and this is the first revision of…
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
A jibbitz (croc charm) with the Royal Caribbean logo. My print settings: 0.2mm nozzle 0.05mm layer height 0.15mm initial layer height 1 wall 100% infill Archimedean Chords top surface Filament swap at 7.30mm (layer 170) Grid supports
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed figurine inspired by Captain Jack Sparrow…
The Pirates of the Caribbean ride at Disneyland and Magic Kingdom has undergone numerous changes over the years. One of those changes was the loss of the Red Head in the auction scene. Although she is still there somewhat as a pirate, she…
🏴☠ Pirates of the Caribbean – Cursed Aztec Gold Coin Bring a piece of cursed treasure to your collection! Inspired by the iconic Aztec gold from Pirates of the Caribbean, this detailed coin features a central skull surrounded by raised…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Generic Black Transmission Distance: 0.3 PLA PolyLite Green Transmission Distance: 1 PLA Generic Brown Transmission Distance: 3 PLA Generic…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige…
Jack Sparrow Pirates Of The Caribbean Karayip Korsanları Movie Lithophane
Fusion file if you'd like to change the look https://a360.co/4oAksY3
Here’s something for fans of the rugged pirate world. Created by Deltaprints as a low-poly version, this model was inspired by a well-known movie franchise and turned into an amazing decorative piece. The model comes in the standard…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized chibi figurine inspired by Captain Jack…
This is my custom ride vehicle that I created for Pirates of the Caribbean. This Model can be printed without supports
use this duck to hide on you next cruse or just to play with
Custom support for the right ramp. This fixes an issue where the left side can droop and as such a ball can become caught in this position and require removal of the glass to fix. All of this is at your own risk! This is not a jersey jack…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Design Concept The model represents a detailed sculpture inspired by enigmatic pirate legends combined with maritime lore. The intricate design of Captain…
Small clip to help keep the 2x target pointed down. This target is unable to use normal target splits due to the tight nature of its location. By using this you can significantly reduces airballs and also help stop cracking on the subway…
The design of the clip that hold opto's don't work very well. They normally pop out a little. It annoyed me so I made this one. Friction fit. PLA 0.2mm layer height. 100% infill. It should be tight enough that it will hold from the bottom…
Keep your seapass on you and still have your room powered up. Works in the newer ships that have the energy saving switch by the door to cut power to your room when you're not there. Exactly the same size and thickness as a standard…
Pirates of Caribbean Coin in two (2) colors
map of 1826 Central America & Caribbean
I was looking for a generic cartoony cruise ship that resembled one from Royal Caribbean (with the Viking Crown Lounge surrounding the stacks), but couldn't find anything. As a last resort, I had ChatGPT create me a 2D caricature image…
Apparently hiding rubber ducks on cruise ships is a thing, so for my upcoming Royal Caribbean cruise I thought I'd make something special. I don't think this is what people mean when they talk about "Duck Boats". It has printed just fine…
Replica of the Pirates Of The Caribbean Gold Coin This model imported from Thingiverse. The model is based on javialam and remixed by cyclone . The remix includes two sided versions and a necklace holder. Other models which are very…
Pirates of the Caribbean - Captain Jack Sparrow (Johnny Depp) 3D printable model.
Pirates of the Caribbean - Will Turner (Orlando Bloom) - 2003 3D printable model.
Pirates of the Caribbean - Elizabeth Swann (Keira Knightley) 3D printable model.
Pirates of the Caribbean - Captain Hector Barbossa (Geoffrey Rush) 3D printable model.
Pirates of the Caribbean - Davy Jones (Bill Nighy) 3D printable model.
Pirates of the Caribbean - Blackbeard (Ian McShane) 3D printable model.
Pirates of the Caribbean - Tia Dalma (Naomie Harris) 3D printable model.
