74 models
This is a quick N Scale (1:160) model I did of an old house in Chance Harbour, NB, Canada. This model is meant to have inkjet-printed siding and roofing details added, in an experiment to create more detailed models at that small scale.…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…
Chance milestone coin .The model could be glued from two parts.
This thing is a waste of bearings compared to current options. Use this instead Uses either 9 or 15 3x7x3 F683ZZ flanged bearings and 3mm x 14mm pins to assemble. I used Foamgasm's collet and lynx connection and Chance's inline bearing…
Wanted to make a text box of Spamtons classic line from Deltarune to keep with my model of him. Print Settings Printer: Fokoos odin-5 f3 Rafts: No Supports: No Infill: 15% Filament: PolyMaker Polyterra PLA Fossil Grey Category: Other
Steam Deck Belly Stand Adjustable - Enchanced Done: - Bigger back screw - Minimal position holder Todo: - full cover of rails - inner rails for less wobly - move screw to front Somewhere in future: - rework for carry with case capability
Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…
UPD: Added model of coloured plate, if you prefer to print it. Props for the great magic trick “Master Of Chance”. See the performance video. I am not the author of the video, nor his affiliate in any sense. The props he shown was just an…
Chance Vought F4U Corsair Wall Art silhouette model. Adjustable size.
I am yet to get a 3d printer, so I can't print it myself. I would assume supports would help.
Credit to Mr.Makeit for the Body, https://www.printables.com/model/1410760-upd-articulated-roblox-figure
The source marked this model as adult content.
This is just the center section of the Warp Saya with my edits to better restrain vertical motion of the center portion.
Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…
Inspired from a sticker I saw online, but can't find the website anymore. 2D Art "Never miss a chance to dance"
See "Differences of the remix compared to the original" section. Important: you will need to modify your aluminum bar for this remix. You only need a drill and hand saw to do this. The modified bar is in the .step file, and the change is…
A visual rework to most of the external bits of a Zinc 2.0 Muzzle SCAR is remixed from the linked file. Frame is remixed from the original files at https://github.com/118design/ZINC Trigger Guard is my own design Category: Sport & Outdoors
This is an organizer for the boardgame CO2: Second Chance. Since I found the original insert pretty useless when it comes to setting up the game I decided to toss it and design my own one. It does support sleeved cards and passed the…
Famous Magic Trick MASTER OF CHANCE by Lubor Fiedler.
hey credits to bcool
The Double Six Biased Dice is an intriguing creation meant for those looking to add an unpredictable, yet skewed, element to their game nights. Unlike standard dice, these are weighted to favor the number six, giving it a higher…
Classic-style 3D chess pieces including the chancellor and archbishop, designed for popular non-standard chess variants such as Gothic, Capablanca, Gliński–Capablanca, and McCooey–Capablanca. The knight requires minimal support under the…
Un dés spécialement conçu pour les personnes en manque de chance, faite quelques lancer et vous aller reprendre confiance en vous ! A réaliser en deux couleurs avec l'AMS ou le MMU
Similar to Watto's chance cube, 3 sides show Rebel insignia and 3 show the Empire insignia. Dimensions are 25mmx25mmx25mm with rounded edges. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .12…
Enhance your Secret Hitler board game with this 37mm Chancellor coin. It's a nice tactile addition that replaces the usual wooden plaque or the printed paper placard, adding a bit of DIY style to the game. The design is inspired by a…
Steve : Cloudy with a chance of Meatballs
I would recommend printing with a 0.2 nozzle but it works fine with a 0.4 its just a bit sloppy I also don't know how balanced of a dice is really is so I didn't put any g-power markings,
Inspired by my Esports team logo "Zero Chance" and Rocket League ranking system. I designed this as a way for my teammates and I to promote what Rocket League Rank we are against our competitors wearing it like a badge of honor. This is…
Box with magnetic lid for transporting the Bowscale HS4 from Last Chance Archery safely. The Box has space for two spare Batteries CR2032. For the magnetic lid, you need 8 magnets with a diameter of 4mm and a depth of 3mm.
All the things I made for the Mini Claw MC4 that aren't the Skeggøx stock (see my profile for that). The Muzzle+BCAR uses a barrel that's cut down to ~132mm or so - it's threaded so it can be used with barrels that are pretty close but…
I designed this box to store all the drill bits and extractors I use on daily basis at work, it had to fit in a pocket. The cover is press fitted to close and it is strong enough to prevent it to open all the time
We've tried war and it's not working. Let's try something different let us try peace.
The Chance Blitz Picatinny-Back Grip Stock Point is a simple modification of the battery door that includes a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock, this rear tactical rail is also…
I have the [expansion/promo components] ( https://boardgamegeek.com/boardgameexpansion/270310/co-second-chance-limited-pack-expansion-and-upgrad ) and they didn't have a home in the original design so I made some changes. Replaced the…
Glory to You, and Your House! Command the respect of the Klingon Empire right from your display shelf with this 3D printed Gowron bust. As one of Star Trek's most memorable Klingon Chancellors, Gowron's fierce presence is undeniable. This…
This D4 has two colored tips allowing it to produce values between 1-4 OR 0-1. This is a multi-color print. Multi-material if you use my custom support. 0.4mm Nozzle or smaller 0.2mm Height or smaller infill 100% on dice, 0% on custom…
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
At the request of a friend, I mocked up some name plates for Shaffer's Last Chancers, AKA the 13th Penal Legion. These should fit on the rim of a standard, tapered 25mm round base. If there are other miniatures that could use names, let…
The Chance Freerunner v2 Picatinny-Back Grip Stock Point is a simple modification of the battery door that includes a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock, this rear tactical rail is also…
Small update. i made counter sinkholes for the wall mount screw's for easy mounting. And a second type that you can hang the ones with a cord in between the two sockets. it's a advise to print in 20% or 25% infill do to strength needed…
The chancellor is a fairy chess piece that can move like rook and like knight.
a character form the game forsaken
I have designed a very motivational key ring for you, download it, print it and share it with me. Thank you.
Something that my Dad always says as a joke when you leave instead of saying drive slow and be safe he says "drive fast and take chances"...... so I plasti-dipped it on my car. Category: Art
Just a battery door extention for a Chance Freerunner Blaster.
The Chance Riot! Momentum Muzzle is an expermental alternative to the blank "no-car" muzzle device in the original fileset. Featuring six lines, this 0-degree PCAR mimics one of the muzzles from Eli Wu's Momentum. It should theoretically…
This holder allows you to store a roll of toilet paper directly under the washbasin. It clips onto the discharge pipe (diameter: 32mm). Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes **Resolution:**…
The Rook-Knight Hybrid: Introducing Chancellor Marshall Knook XL2, a model of the behemoth dual toolhead Prusa 3d printer with an added top decorative attachment plus a knight-rook-hybrid Marvin resting on the print bed. I remixed my…
The Chance Riot! Muzzle for Worker Modular BCAR Segment is an alternative muzzle for the Riot flywheeler meant to accept 3x2 Worker BCAR modules. After a short period of testing, I abandoned this design. However, I figured I would publish…
99% of gamblers quit before they win big.
Print with 15% infill to match existing chips, no supports needed.
Print flat side down. Slide onto end of bar with untapped holes. Make sure the rear hole of the jig aligns with the existing hole. Drill out the pilot and then to size. Mark bar at the small cutout on tap. Cut. yay you did it
The Chance Riot! 0-degree BCAR is an alternative to the blank "no-car" muzzle device in the original fileset. Featuring nine flange bearings in a 3x3 arrangement, this device promises better accuracy and reduced fishtailing by gently…
This is a remixed Freerunner V2 made by Chance , but with a cooling fan installed in the front to help with heat regulation during games. I used this thing for an entire day and it NEVER overheated (I had the fan on the entire time) and…
Chance Head For FanbloxCompany Figure. making the 2.0 head soon=]
Voici un ensemble de deux dés à jouer qui ne loupe jamais les 7. Here's a set of two dice that never misses a 7.
This is an organizer for the boardgame CO2 Second Chance. For some reason my original upload does not show up in the search or my profile, so here's the link: https://www.thingiverse.com/thing:4610499 Category: Toy & Game Accessories
🎲 Get Out of Jail FREE... and Light Up Your Game Room! 🎩 Bring a little classic board game nostalgia to your collection with this Monopoly-inspired Get Out of Jail Free Chance Card Lightbox! Inspired by one of the most recognizable cards…
🦋 What is a Fairy Chess Piece? A fairy chess piece is any game piece not used in standard chess. These unorthodox pieces appear in alternative chess games and special chess puzzles. They move, capture, or promote in ways different from…
I apologise for the poor physical photo I’ll take a better one at some point 😇 Slot and twist wall hook. Minimal supports. Place the main body on the plate with the widest hole to avoid printing
Happy late halloween!
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Credit to Mr.Makeit for the Body, https://www.printables.com/model/1410760-upd-articulated-roblox-figure
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
I apologise for the poor physical photo I’ll take a better one at some point 😇 Slot and twist wall hook. Minimal supports. Place the main body on the plate with the widest hole to avoid printing
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…
Chance Vought F4U Corsair Side Wall Art; can be scaled easily and can be hung or stand alone. I also take requests
One of the greatest combat aircraft of all time, the American Vought F4U "Corsair" became an item of legend for its role in the air wars of World War II (1939-1945), the Korean War (1950-1953) and several Cold War conflicts that followed…
