Counting matching models…
“ More Than a Board ” is a 3D-printed chessboard with a twist: every chess piece doubles as a functional tool . Instead of being just decorative, the King, Queen, Rook, Bishop, Knight and Pawn can be used as hooks , supports or modular…
These creepers are Minecraft-inspired checkers pieces. The "Creeper Checker" is the single piece used at the beginning of the game. When you reach the end of the chessboard, it transforms into a double piece by placing the "Creeper Double…
A simple chess board with chess pieces. Took me like 8 hours to make as a beginner
Add-on for the Magnetic Chessboard with a set of checkers pieces and a matching storage box. If you like my Magnetic Chessboard and also play checkers, then this is for you. It is only 2 cm high and is attached underneath the existing…
Neodymium magnets size 10mm (width) 1.5mm (height) Add a pause on the desired layer when printing white and black cells to install the magnet. When printing numbers and letters, add compensation (x, y) -0.1 The number of parts that need…
Chessboard, that can be separeted into two parts. The fields have 4mm holes, so that the figures don't fall of the board Print the ground plates one time and the square plate 32 times. Figures: Chess figures for my travel chessboard von…
Chess figures for my travel chess board Travel chessboard von JoJo | Kostenloses STL-Modell herunterladen | Printables.com
NO SUPPORT Little portable chesset with magnet. In this way you can play with your set everywere. When you want you can change position at your board without put down pieces from board. when you print pieces you have to pause printing and…
Drawers open one per side instead of both on the same side making it possible for the players to access their own pieces. Additional modifications: I like using press-fit instead of glue where possible so I resized the box dowels and…
CS: Velikost políčka při 100% měřítku: 25 mm x 25 mm Ve 100% měřítku vhodné pro tiskárny s minimální tiskovou plochou: 230 mm x 120 mm Např. Prusa i3 MK3/S/+ Tiskové nastavení (PrusaSlicer): Výplň: 10% kubická barva → 0 mm - 1,4 mm…
This is my mathematically correct wormhole chessboard that is also magnetic! Check out the video! Its designed to be printed on a 220x220 build plate. WHY? You see, I love chess, and math, and 3d printing! so I combined all of my favorite…
Hi and thanks for reaching out. Let me indroduce this design. Designed for 255mm plate Print intructions: There are 3 print plates. You can choose if you want to print the chessboard in black or white color (on picture in white). If you…
This is just a modified magnetic tile with different height for accessible chessboard.
A simple chessboard that can be folded and closed with the pieces inside. I've glued small 4mm neodymium magnets inside the cavities in the chessboard walls. I've attached a split stl with all figures inside which is easier to print, but…
This model is printed in pieces. See image or pdf file. It is still untested, but should work as it is based on a well tested design. More info will come later. Thank you David Lamb to suggest making this edition. This chessboard is…
The Rook The tower and the playing field have recesses for magnets. This makes it easy to wrap the playing field around the tower. The tower has 3 levels to store the game pieces. Necessary parts Printed 8x Playing fields (16x half…
This is a custom chess board design that allows it to all be printed in modular pieces for easy construction for most any size printer. The chess board squares are all 2"x2" and the base they all set into adds about 1" on all sides. Each…
(Czech) Na modelech nejsou dodělané písmenka, které lze vidět na fotce. Doporučuji šachovnici slepit vteřinovým lepidlem. Lepidlem eliminujete vůle ve spojích a šachovnice je ještě hezčí. Samozřejmě kdo nechce tak šachovnice drží i na…
GridLink-Chess : A modified subest of the GridLink system , for a traditional 2.25 inch square cornice edged chessboard that meets the requirements of the Fédération Internationale des Échecs (International Chess Federation) for…
Chessboard ready for MMU print. The field is 20x20mm, and it fits on MK4S/MK3S plate. Green - https://www.prusa3d.com/cs/produkt/prusament-pla-galaxy-green-1kg Gold -…
These files allow you to make a chessboard which also transforms into two stackable boxes that each hold the pieces from one of my two chess sets Backyard Birds Chess Set and Woodland Squirrel Chess Set (or any other set of similar size.)…
chessboard designed for single filament printers just print 4 of the board in whatever color you want on the rim and the squares twice in black and twice in white (or whatever color you want the squares to be)
This is the Dejarik game board seen in Star Wars: A New Hope . Chewbacca and R2-D2 played on it inside the Millennium Falcon. The model has a diameter of 15 cm. It includes the main board and six switches. The main board can be printed…
This is a chess set, with pieces variyng between 0.51'' to 0.55'' (inches). Each piece has a place for a 5 x 1 mm magnet (you can use a 5 x 2 mm magnet also), the chessboard has a closing mechanic, that allows you to even put it in your…
his is just a modified magnetic tile with hole for 5x1 magnet. Pause at 10 layer when print at 0.16 to add magnet
Hello, Today I have a Folding Chessboard Puzzle for you. The individual puzzles are 40x40mm in size. They are created specifically for Harry Potter chess. I used PLA/PETG as the material. No need to use supports If you are interested in…
You will need a total of 104 5x2 mm magnets. Insert the magnets into the holes and then snap the cap into place. As an alternative to the cap, you can use glue to hold the magnets in place. In this case, you will need 24 5x6 mm magnets…
Simple chessboard kit. Each piece is separate. Can be glued together or left disassemble.
This model extends/modifies GridLink to create the largest FIDE compliant chessboard via tight fitting hidden jigsaw-style connections. The result magnetically fastens from four parts for ease of travel. It has the thickness, weight and…
Greek mythology chess boardgame. Calm and patience in removing the supports, especially in some figures (horse and pawn), space the supports from the objects on xy. The base of the chessboard (scacchiera) is divided into four pieces (they…
Echiquier / Chessboard en 4 parties à assembler avec le link.a imprimer avec support. les pieces viennent de https://www.printables.com/@Duker_105342 https://www.printables.com/model/70643-hexagon-chess-set
Here is a traditional feeling chess set, having been very much based on Dubrovnik, Staunton and Fischer designs. However, it makes a few subtle adjustments. Overall size ratios are adjusted to be a mix of Dubrovnik's wide bases and…
this chessboard will drive pro chess players and perfectionists insane.
NASA inspired chainmail chess/checker board with snap-in color caps. All parts printed using PETG with 100% infill, .4mm nozzle without support or brim. Print 8x8 at scale of 2540 or for a ~1" square. For a ~2" square print 4x4 at scale…
This is a miniature version of a chess set. It contains the chessboard and all chess pieces. Printing recommendations: Before you print all of the black squares, make sure you print a singular practice one to check the size and adjust…
“ More Than a Board ” is a 3D-printed chessboard with a twist: every chess piece doubles as a functional tool . Instead of being just decorative, the King, Queen, Rook, Bishop, Knight and Pawn can be used as hooks , supports or modular…
Print-in-place fordable chessboard / pixel art board box with push in tiles. Board Size: 250.2 x 250 x 33.2 mm 64 Tile slots Tile Size: 29.5 x 29.5 x 5.75 mm Print: 0.2mm Layer Height Attach magnets on the inside to help keep the box closed
Easy to print board box For assembly you will need: 8mm ⌀ 3mm height magnets piece of filament for hinge glue (for magnets) Model is printable on Prusa mini. Chess piece set in the gif is from: This model is inspired by:
These creepers are Minecraft-inspired checkers pieces. The "Creeper Checker" is the single piece used at the beginning of the game. When you reach the end of the chessboard, it transforms into a double piece by placing the "Creeper Double…
A simple chess board with chess pieces. Took me like 8 hours to make as a beginner
I created this chessboard in four parts, drilled holes so that it could be attached to a wooden base, printed everything in PLA, and glued it together with super glue. I printed the pieces from here:…
I made a magnetic chessboard measuring 200mm x 200mm x 10.4mm. It's a single object that can be printed in place. Please note that the print job needs to be interrupted at least twice: once to insert the magnets and once to select the…
This chessboard can be used with the tiles and pieces I created in my remix of the Herman Ohme Magnetic Chess Set. No printing supports are required. Use super-glue to bond the parts as follows: Test-fit the parts together before gluing…
Scacchiera puzzle, con tessere ridotte in dimensione rispetto al modello originale, portandole a 3 cm di lato e 4 mm di altezza. Per completare la scacchiera bisogna stampare, oltre alle 32 tessere nere e 32 bianche (file central_piece),…
Scatola per la scacchiera puzzle disponibile al link seguente: https://www.printables.com/model/1720917-puzzle-chessboard-scacchiera-puzzle Il coperchio può essere stampato in un singolo colore utilizzando il file box_top. Quello in foto…
Folding chessboard with magnet lock and storage for chess pieces. Chessboard is divided into 3 models, board and insert. Print 2 copies of each board pieces, assemble and glue together. insert 3mm magnets for locking. Print 32 black and…
Info Hi, I made a simple magnetic chessboard and remixed the 1950 Dubrovnik chess set by.: https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950 Works really nicely with 2x3mm magnets (superglued). I recommend to print chess set…
This square fits just in the chessboard of the original model. I had to cut of 1mm on one side, so perhaps scale it to 95% to be sure. Glue the 32 pieces on the space on the chessboard and you're good to go.
easy to assemble chessboard to be printed with active fuzzy skin
I made the model from scratch, but based it on the original dimensions from trstn so it fits the box. The file shows 3 colors. 2 for the grid and a 3rd internal layer to hold them together, but you could easily change the center layer to…
I printed some chess pieces and realized the model didn't have a chessboard, so I made my own where the pieces could fit and the board could also fit in my printer.
BUILD Pieces On the bottom of chess pieces there is a hole for weight you can place there to make pieces more robust. I used M3 nuts and gypsum plaster to hold them in place. Then you can use fabric on the bottom to make the pieces…
A slightly 3D chessboard. Additional coloring required. Functions just like a regular chessboard, except you will look more posh while using it.
A chessboard that clips together. I've included: STL - colour it yourself in your slicer. FCStd - FreeCAD source file if you want to adjust it (created in v0.21.30143). Note when colouring it, you'll need to print 2 of one, then do the…
Easy to print chessboard. (Figures NOT included, courtesy of Frederik Dedík ) Original Size 320mm (4x 160mm²) Click here for parametric CAD via onshape You need to print 2x A, and 2x B Tiles. Intended to be printed on a 0.8 nozzle with a…
These boxes are a perfect complement to NTX9's Organic Chess 2021 chess pieces. The trays that he designed are changed into boxes with lids that can be assembled into a full 8x8 chess board, so you can have everything that you need to…
keep in mind that this chessboard is vary big it will be ez to print this on a big printer like the CR 10 printers but if you have a smaller printer like a ender 3 pro or ender 3 v2 it will be a little harder to print but you can still…
I couldn't find a chessboard design that was quite what I wanted, so I made one. 360mm size is appropriate for the famous Organic Chess at original size. 240mm is the size I actually printed because I want something more mobile. You can…
Designed for stagetop, with diagonal squares raised 1mm so you can pause printing, change filament, and print in a second colour Make sure to get the diagonal direction correct when placing, your near white corner diagonal should be on…
I found several boards to be printed in two pieces, but I wanted one printable with two colors, in a single print. Then I added a box to hold the pieces; the letters and numbers, on the box, are meant to be printed in a different color…
A large chess/checkers board that is constructed from puzzle pieces which gives the board a unique look and allows easy assembly and disassembly. Included is a storage case designed so that the puzzle pieces don't rattle around. I also…
A puzzle chessboard is a chessboard that consists of puzzle pieces. If you can put together this simple puzzle, you can play chess. :) The dimensions of one playing board are 30x30mm. You can adjust the dimensions by changing the X and Y…
Šachovnice na stůl, polička jsou malá jen 45mm. 60mm by bylo lepších. Nejprve vytisknout bílou, vyměnit filament a dotisknout černou. Chessboard on the table, the shelf is only 45mm small. 60mm would be better. First print white, replace…
A chessboard sized 20x20 cm (roughly 8x8"), so it should be printable on a wide range of build plates. Print the chessboard base in one color, and 32 copies of the inner square in another. The inner square is 0.05 mm smaller than the…
This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…
Required pieces: Hexagonal chess centre pieces: black 21, white 21, grey 19. Hexagonal chess edge pieces: black 6, white 6, grey 12. Hexagonal Corner pieces: black 3, white 3, grey none. Connector piece: 240 You will require 1 additional…
This stylish board for chess or checkers folds in half and provides storage for playing pieces.* Each square of the board measures 45 mm (~1¾", or "executive size") on each side. In order to fit within a 250x210-mm print bed, each…
A support structure for the Paladone travelling chess set felt chessboard. File goes weird when uploaded into a slicer so the dimensions have to be set. X-140mm Y-140mm Z-15mm
chess set and chessboard printed on the bambu with ams unit 0.3mm layer hight , walls 4/4/4. 15%infill , no supports. made with (ERYONE filaments WHITE ,BLACK , WOOD, SILK GOLD PLA) and the two coloer in one is polymaker. the 3mf file for…
I've uploaded the table model with different amounts of tollerance, so you can print the assembly with the best tollerance for your printer. It is fairly easy to assemble, if you chose the wrong tollerance you can just glue the two…
I liked the concept of Heikki_Hietala but I wanted to hide the plugs. In the same idea as I needed to resize them, I made it customizable. Provided STLs are 30mm sides. Chess Set Credit : Alien Chess Set from ethanjurman Instructions…
I printed the round version of the Ultracompact set CastleChess from @Kagarov for a friend and wanted to have a compact and robust board for it that is in one piece, which he can take hiking up mountains and play in any weather. Kudos to…
This is a four-piece 8x12 checkered grid of 30mm squares, for playing the extra-wide and extra-fun game of Courier Chess. If 30mm squares are too small for you, then consider my Executive-size Modular Chessboard (with 45mm squares) or…
I wanted to print a board like this, but couldn't find any online. Decided to make my own :) Chess board for 4 players, prints in 6 parts: 1x 4PlayerMiddle1 1x 4PlayerMiddle2 2x 4PlayerStart1 2x 4PlayerStart2 4PlayerMiddle1 and…
Folding chessboard from 4 basic parts and 4 connectors. The size of one chess square is 40 mm. When you turn the chess square to the right position, it can be clicked, but I still recommend sticking it with instant glue. Overall…
History I was very fortunate to get my first 3D printer in late 2020 (Prusa i3 Mk3). Of course while waiting it to arrive I was browsing things to print and getting inspired what I could do with it. My friend asked me to print him a chess…
The initial model has colliding puzzles in the top right corner: H and 8 (see pictures). New puzzle H is now fitting.
While there are a ton of chessboards, I wanted a simple, 2 tone chessboard which fit together tightly (since it was too big for my printbed). I also wanted to print it with my AMS rather than gluing/snapping squares together. Everything I…
PORTABLE CHECKERS What do you need: 4x dama_plate 4x dama_up_angolo 60x dama_up 32x pedina (considering the queen checkers) 1x dama_case 1x dama_closure The chessboard is made by 4 part that you can store in a minimally sized case!
A stringy chess set, board and box. The pieces are decorated with single strand strings. The box has slots shaped for each piece to fit into snuggly. Everything prints without supports. Print the pieces at 0.3mm layer height with ‘detect…
Customizable chessboard and pieces. Pieces come with a mountable base and the top can be replaced. Board is mounted as a puzzle. For the full set (for 2 players), you'll need: Pieces: 2x Kings (pieces_k) 2x Queens (pieces_q) 4x Bishops…
EGGBO | Chessboard print-in-place Meet EGGBO, a print-in-place foldable chessboard. No assembly required. It was designed to be printed folded and upright for 2 reasons: 1- Fast printing , as the first layer surface is very small, and…
I made it to use with the Pokémon chess pieces (https://www.printables.com/model/30224-pokemon-chess-set) Print 2 of each piece (bases in one colour and top in another) Print with: • 2 wall loop • with supports (but not really needed for…
This is a chess set. It is a very ordinary chess set. However, note that I have made each hole and each piece exactly 1cm, so you might want to scale it down a little bit before printing. License: CC-BY-SA
Print everything in PLA with 0.2 mm layer height and change color for the chessboard pieces after 4.6 mm. Start with white and change to black. 10% infill is sufficient. PETG should work fine also. Please do not re-scale as assembly would…
Included is a complete chess set with chessboard. All pieces are custom made, but still reflect the vintage look. My son has gotten into chess, so I decided to make a game for us to use just about anywhere without having to carry around a…
Custom Chess with pieces and modular chessboard
This is a perfect CHESSBOARD for you and your friends. It has separated squares for better painting. On the bottom of the board you have a space for a heavy material to weight your board. It is a FREE model. IF YOU WANNA SUPPORT MY WORK…
Chess board Resize board width and length but keep height the same. Standard Layers - 0.2mm (5 Layers) Change filament on last layer.
Chess Board - Quarter Board Resize board width and length but keep height the same. Standard Layers - 0.2mm (5 Layers). Change filament on last layer. Print 4 boards then combine into one.
For a complete set, the change is simple: Print one of the original boxes from Haraldan, and one of mine. The original will hold the connectors for the chess board, and mine holds the puck! Other than that, print as you would the original.
I made boxes for models of chessboard and figures. It is a combination of two foreign projects from which I printed the chess pieces. Chessboard (not my model): https://www.thingiverse.com/thing:1505544 Figures (not my model):…
I made this model to paint a checkerboard pattern on the wings of RC gliders
