P
PrintablesChrisTheViolaNerd
Mosaic Chevron Ripple Vase
Print with 0 infill, 0 top layers, and 3 walls.
- Downloads
- 3,160
- Likes
- 892
- Rating
- 4.86
Search results: chevron
Counting matching models…
P
PrintablesRithm3D
Chief Petty Officers - US Navy (Anchor Chevrons)
These were designed to have a flat back, thus make them mountable on flat surfaces using the appropriate adhesive. The height as it lays on its back is at 6.5 mm. The width is between 102-115 mm. The Length at 176 mm. I recommend the…
- Downloads
- 1,418
- Likes
- 83
- Rating
- 5
P
PrintablesSASSy Design
Chevron Plant pot and Planter - Vase mode design
A simple design inspired by chevron pattern planks. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the pleasure to…
- Downloads
- 843
- Likes
- 219
- Rating
- 5
P
PrintablesRoadsideRC
RC Crawler Obstacle #5: Chevron Bounce
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
- Downloads
- 821
- Likes
- 138
- Rating
- 0
P
PrintablesSpradlinb
Stargate modified Chevron parts
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
- Downloads
- 635
- Likes
- 217
- Rating
- 5
P
PrintablesChrisTheViolaNerd
Chevron Ripple Vase
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
- Downloads
- 442
- Likes
- 85
- Rating
- 5
P
PrintablesRithm3D
U.S. Coast Guard - Chief Petty Officers (Anchor Chevrons)
These designs were made with a flat-back surface to be wall mountable. The height of these designs, while laying on it's back, is 8 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure. ***NOTE*** Each USCG…
- Downloads
- 382
- Likes
- 32
- Rating
- 5
P
PrintablesPonneke
Jason Voorhees part 4 / IV Chevrons template
Jason voorhees mask part 4/IV template. people are selling pdf tempates for a few bucks. but i have a printer and spare time :) I made the template in fusion 360 with the correct dimensions. how to use: Place the template on a paper. use…
- Downloads
- 371
- Likes
- 14
- Rating
- 0
P
PrintablesTom
Chevron Nozzle for Jet Engine
This is a chevron nozzle for the famous "3D Printable Jet Engine" by Catiav5ftw. You can find his model on Thingiverse. ++++Print details++++ designed for 0.15mm Layerheight no supports needed #####GERMAN##### Dies ist ein Chevron…
- Downloads
- 361
- Likes
- 115
- Rating
- 5
P
PrintablesT.Rob
Double Chevron Pen Blank Mold
This is a 3D printed mold for resin casting pen making blanks. In response to a question from a maker, the mold is sacrificial. The intent is to turn away the mold on the lathe. Do not use mold release! Print Settings Printer Brand: Prusa…
- Downloads
- 352
- Likes
- 36
- Rating
- 5
P
PrintablesJerry's Custom Creations
Chevron style Mesa Pen blank mold
Fill with resin, drill and glue in your tube and turn away. Works great in PLA or print on your resin printer.
- Downloads
- 278
- Likes
- 33
- Rating
- 5
P
Printabless7emar
GEN2 Decor - Chevron Faceplates - North Series
Faceplates designed for the GEN2 Decor Drawers by Jerrari. ------ I printed with these settings: Resolution: 0.16 Supports: No Infill: 15 % Only one wall on first layer View from below Print face down and rotate the model by 45 degrees…
- Downloads
- 256
- Likes
- 25
- Rating
- 0
P
PrintablesKaren Chau Designs
Washi tape tool | Cut washi tape into fun shapes and patterns! | straight edge, zig zag edge, arrows, chevrons
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
- Downloads
- 199
- Likes
- 51
- Rating
- 5
P
PrintablesJDM Designs
Stargate Universe Gate Chevron
Stargate Universe Gate Chevron - I left plenty of room for lights. Print one of each part for the complete model. Category: Props
- Downloads
- 144
- Likes
- 30
- Rating
- 0
P
Printablesm8
Chevron - Herringbone gear
Chevron - Herringbone gear 30 teeth
- Downloads
- 121
- Likes
- 17
- Rating
- 5
P
Printablesmschechter
Windowsill Planter - Chevron Pattern
I designed this model to be 210mm wide but it turned out to be too big for my Ender 3 v2 bed, so I shrunk only the X axis to 205mm & it fits just right. I have included the unmodified STL, so I suggest shrinking it if you're on the Ender…
- Downloads
- 85
- Likes
- 12
- Rating
- 0
P
Printablesra100
Glowing Stargate Chevron earrings
Stargate chevron inspired earrings. Glowing with LEDs and small battery. Print instructions Printable without supports For glowing version you'll need: 2.5 to 3V SMD LED, the shinier the better. CR1025 3V battery solder and 2 short wires…
- Downloads
- 76
- Likes
- 23
- Rating
- 0
P
PrintablesDany Sánchez
Chevron Laptop Raiser
This easy to print stand raises your computer to let air flow underneath and help prevent overheating. No moving parts or complications. Small enough to put away in a backpack pocket You can print several and keep one at every work and at…
- Downloads
- 73
- Likes
- 8
- Rating
- 0
P
PrintablesMariana Santana
Maceta con textura chevron
Maceta con textura chevron
- Downloads
- 55
- Likes
- 3
- Rating
- 0
P
PrintablesGunplaMark
Knomi Stealthburner Faceplate with Chevron Design
To print this on a single filament printer like the one I have, load both files into your slicer and align them, then generate G-Code for the two parts separately. Print the pattern first in your accent color, and then change filaments…
- Downloads
- 51
- Likes
- 12
- Rating
- 0
P
Printablesmkasberg
Keyboard Wrist Rest (Chevron)
A wrist rest that looks great next to your mechanical keyboard! Add some personality to your battle station by printing this in your favorite colors! The wrist rest is broken up into multiple sections with a chevron design. This allows…
- Downloads
- 48
- Likes
- 3
- Rating
- 5
P
PrintablesPlazt3k M8kr
Chevron Gasoline Lightbox
This is my Chevron Gasoline Lightbox and what I used to assemble it. The stand in the image was not part of this design but a simple prop. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesÜber Designs
HC Diana Knuckle Duster (and Chevron Muzzle)
Quick knuckle duster I drew up to break up the silhouette a bit, hope you enjoy! Requires 2x M2 screws for the flared magwell and 2x M3 for the picatinny rail Also threw in a muzzle I drew up. Needs 4x M2 screws Hope you like my models,…
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
PrintablesBenBreaksThings
Tessellating Chevron Tile(s)
Entry for the 50th Prusa flash contest, tessellated tiles. The pictured orange triangles have a subtle 2 mm slant to add depth.
- Downloads
- 26
- Likes
- 11
- Rating
- 0
P
PrintablesK3D-Works
CIVIC FL1 Chevron Aerodynamic Part
This 3D printable part is designed to enhance the aerodynamics of your Honda Civic FL1. By strategically manipulating airflow, this chevron-shaped component contributes to a smoother driving experience. Specifically engineered to be…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesCoreXY_Customs
Modular Hot Wheels/Matchbox Diecast Chevron Display Stand
This is a model I created to display my most prized Hot Wheels and Matchbox possessions properly. As you can see in the photos, it can also hold similar scale cars like the mini Lego F1 cars. It uses a nesting chevron shape with each of…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
Printablescj
Chevron Boot Hook
A simple modular boot/shoe hook. Left and right versions including a spacer that stacks, so you can modify the installation to suit different kinds of shoes. Protrudes just 40mm from the wall to keep shoes off the floor and tucked away.…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesFredrick Freightner
Chevron Frankie 4-Wheeler Smiley Car Compatible Roof
This is from a 3d scanner and as such there are tooling markings and imperfections from the part that are on the model.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesFredrick Freightner
Chevron Della Delux Smiley Car Compatible Roof
This is from a 3d scanner and as such there are tooling markings and imperfections from the part that are on the model.
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesGreenform Goods
Chevron Knit Geometric Vase for Nostalgic Decor
Drawing inspiration from classic knit patterns, this vase features angled chevron geometry that creates defined shadows along its woven texture. The repeating geometric surfaces naturally split dual-color silk filaments across every…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesabstractiaDsgn
Geometric Lampshade – Modern Chevron Shade for Wireless Puck Lights
Modern Geometric Lampshade Add a touch of geometric elegance to your space with this striking modern lampshade. The bold angular pattern creates captivating light patterns and adds visual interest to any room. The shade simply slips over…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
Printablesrp3d
Chevron Pattern for Expro Pedal Expression Pedal
Made a different design for the decorative piece on top of the pedal
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
PrintablesThomCraft3D
Support mural pour chevron de 44 mm / 44mm Timber Wall Mount Bracket
FR Ce support mural imprimé en 3D est conçu pour maintenir fermement un chevron ou tasseau de bois de 44 mm de largeur contre un mur. Il permet d'assurer la verticalité d'un montant pour la réalisation de structures de rangement,…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
GEN2 Decor - Chevron Faceplates - North Series
Faceplates designed for the GEN2 Decor Drawers by Jerrari. ------ I printed with these settings: Resolution: 0.16 Supports: No Infill: 15 % Only one wall on first layer View from below Print face down and rotate the model by 45 degrees…
P
Printables
Chevron Della Delux Smiley Car Compatible Roof
This is from a 3d scanner and as such there are tooling markings and imperfections from the part that are on the model.
P
Printables
Chevron Frankie 4-Wheeler Smiley Car Compatible Roof
This is from a 3d scanner and as such there are tooling markings and imperfections from the part that are on the model.
P
Printables
Chevron vase
Printed at .8 mm on my X1C. Feel free to try different colors and play around with the Fusion 360 file (parametric!). Originally made to match the design language of "lesateliersdepaola" and turned out to be a very satisfying vase.
P
Printables
Chevron Flag
Chevron flag I made to fit onto a bracket taken from the below DIY Weather station. https://www.instructables.com/DIY-Weather-Station-With-ESP32/
P
Printables
Jet Engine Chevron Nozzle
I designed the chevron nozzle to fit onto the the famous Jet Engine by Catiav5ftw. What is it? The chevron nozzle, with its sawtooth pattern at the engine's exhaust, is designed to cut down on noise pollution. It does this by improving…
P
Printables
1.5 Tank Track Chevron Grip
Wanted my fpv tank tracks to have some grip for moister ground outside Category: R/C Vehicles
P
Printables
Digital Pattern - U.S. Marine Corps Chevrons (PFC - Sgt)
These digitally patterned chevrons was created to be used by any multi-material capable 3D printer. The intent is to resemble the digital pattern of the woodland and desert colors from the camouflage uniforms worn by U.S. Marines. Each…
P
Printables
Simple Box with Print-in-Place Zero-Clearance Vertical Chevron Hinge
Warning: I haven't printed this one yet, so it might not turn out great. This hinge design turned out absolutely excellent on a different project. Sadly I lost the files for that one, but I put this here to share.
P
Printables
chevron fatui
Chevron model for cosplay by Genshin Impact in the first photo, the aspect ratio is 1/2.5 in the stl file, it's different!!!
P
Printables
Modular Hot Wheels/Matchbox Diecast Chevron Display Stand
This is a model I created to display my most prized Hot Wheels and Matchbox possessions properly. As you can see in the photos, it can also hold similar scale cars like the mini Lego F1 cars. It uses a nesting chevron shape with each of…
P
Printables
Stargate Chevron Fridge Magnet
I used 2 Super Strong Neodymium Disc Magnets, 8 x 3mm for this project. Holds full sheets of paper no problem!
P
Printables
Chevron Cup or Vase
basic cup/vase with chevron pattern, must be printed in vase mode or it will print solid Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Filament: ERYONE PLA Notes: MUST PRINT IN VASE…
P
Printables
Chevron Sponge holder for kitchen sink
This is a sponge holder for ceramic/stone kitchen sink with 25 mm wide edge. No supports needed for printing.
P
Printables
Chevron vase
Printed at .8 mm on my X1C. Feel free to try different colors and play around with the Fusion 360 file (parametric!). Originally made to match the design language of "lesateliersdepaola" and turned out to be a very satisfying vase.
P
Printables
Chevron Flower Pot - Vase Mode Remix
This is a remix of @ddani 's beautiful minimalist flower pot with 1960s-inspired chevron patterns, modified to remove the holes at the bottom of the pot and better suited for vase-mode printing.
P
Printables
Chevron Flag
Chevron flag I made to fit onto a bracket taken from the below DIY Weather station. https://www.instructables.com/DIY-Weather-Station-With-ESP32/
P
Printables
Project Chevron Wall Art
This chevron piece is designed to be used as a single repeating tile in a larger art piece. Because of the shape, pattern variations are nearly infinite. Included: 3mf Files -Chevron -Wall Mounting Cleats -Mini Chevron (Useful for…
P
Printables
Jet Engine Chevron Nozzle
I designed the chevron nozzle to fit onto the the famous Jet Engine by Catiav5ftw. What is it? The chevron nozzle, with its sawtooth pattern at the engine's exhaust, is designed to cut down on noise pollution. It does this by improving…
P
Printables
Catan Fish Chevron Replacements
The original paperboard fish chevrons don't work well with 3D Catan tiles, so I whipped up this amalgamation of mathgrrl's Catan numbers ( http://www.thingiverse.com/thing:239439 ) and cerberus333's "Fish for a desk" (…
P
PrintablesJerrari
GEN2 Decor - Faceplates - Chevron Series
The GEN2 Chevron Series is a collection of drawer faceplates for the GEN2 Decor Series. Print the drawer bodies, slide a chevron faceplate into place, and lock it with the optional printed clip. The GEN2 Chevron Series is a collection of…
- Likes
- 94
- Rating
- 5