Counting matching models…
First of all: What is this about? I really like the look of the Mini Stealhburner, but I dont like its weak cooling performance on my Voron 0.2. This printer is capable of printing fast - especially with a CHT nozzle. But overhangs,…
Drain adapter snaps onto the chiller drain flange as shown in the picture above. It can be installed with the drain plug already attached. If it's too loose or too tight you can scale the print accordingly but it should fit well as…
If you like to enjoy your Monsters over the span of a few hours like I do, you need a way to keep them nice and cold. What's colder than an ice bath? (Nothing you want to stick a can of Monster into, wise guy.) This keeps the ice out of…
This is a remix to fit on 8 mm glass like my Red Sea Max Nano. Use any M4 bolts longer than 5 mm, no threaded inserts required. I used zip-ties because I didn't have M4 bolts at hand. This thing can easily keep 75 liter tank's temperature…
I'm certainly not the first to use this fog machine chilling trick, but I've created this duct to help keep the fog low-lying, and to make the pipe a bit more stealthy. I put my frozen water bottles at the exit end, so the duct also hides…
This is a beer cooler chiller. Fill it with water to the fill line and put it in the freezer overnight. Then put it in your beverage cooler with the cans up against it. I recommend printing this using ASA filament with a 50-65% 3D…
This is a replacement drain cap for the CW-5200 and CW-5202 Water Chiller. I printed my replacement with a 100% infill, also added 16mm O-ring to help with seal.
Update, check out V2 here : https://www.printables.com/model/1035150-hand-crank-can-chiller-v2-work-in-progress Proudly presenting the hand powered can chiller. Beside this device you need a container with a layer of ice on wich the can…
This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…
Printed at 15% infill but advise you to add a modifier to print 100% infill near the hex slot as shown in my slicer. No supports needed.
This is my version of the Mini Coleman Can Koozies, done in the Dr Pepper and Diet Dr Pepper Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in…
I made this for a basic diorama, so its easy to print and doesn't support. Please adjust size to your needs. Let me know if you have any feedback or suggestions
Bottom face down, print with support to get the best result.
Cool your drink in 2 minutes! You do need to freeze some water in a tub, but if you place it back in the freezer after use you will always be able to cool a drink really fast. Place your can on the ice, turn it a bit by hand to melt a…
This is my version of the Mini Coleman Can Koozies, done in the Harley-Davidson Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…
More idea than real functional model. I have no printer so it is not tested. If somebody could try that it would make me happy. It is designed for 20pcs EU beer box - 0,5l one bottle. One ice block will chill 4 beers. For full box you…
A Gentle and Cuddly Desk Guardian Relax in the company of the forest's most peaceful resident! This delightful 3D-printed panda figurine is a masterclass in cozy, gentle design, rendered in an irresistibly plump "chibi" style. Sitting…
Stand for v60 on top of HyperChiller. I printed it with PETG to withstand more heat.
This is my version of the Mini Coleman Can Koozies, done in the Milwaukee Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I included…
Johann Christoph Friedrich von Schiller — Buste Ce buste représente Johann Christoph Friedrich von Schiller, figure majeure de la littérature allemande, poète, dramaturge et philosophe emblématique du mouvement Sturm und Drang puis du…
This is my version of the Mini Coleman Can Koozies, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…
So I had one of those evaporation based air chiller laying around. They don't really work. But they do have a nice fan, controls for the fan and USB input. So I took mine apart and modeled this solder fume extractor around the internals.…
An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support
I've made a placeholder/stand for my grainfather G30 flow chiller that ive stationed on a shelf beside my brewstation.
Hi! Here's my submission for the “Can Contest” – a concept I designed to keep your can cold for as long as possible. I wasn’t able to 3D print the final version yet — I started a bit late and my printer is on the slower side — so please…
This adapter lets you make pour over coffee directly into a hyperchiller. Disconnect the baseplate from your V60 and snap the glass cone into the adapter which rests on top of the hyperchiller. Brew and enjoy!
This is a simple lid designed to perfectly fit atop my “ Better Homes & Gardens Stainless Steel Wine Chiller ”. The top of the lid features a simple pinch handle, and the underside features a rounded bevel specifically designed for this…
Simple cap to keep dust and unwanted particles out of the glycol bath for unused hose ports.
This item allows you to lower the temperature of your thermometer very quickly and effortlessly. Simply insert the thermometer and shake it from the handle provided. I printed this with PLA and 15% infill
Designed these holders for my dad so that he can easily sit the chiller unit on top of his PrimeWeld TIG325X Tig Welder. Yes I know it's probably not the best idea to have a reservoir of coolant sitting on the top of a welder, but it…
This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Dodge SRT Demon Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…
When using the Neat (Now Nesh) Whiskey Chiller on top of Glencarin glasses, I was worried about balancing the chiller on the small mouth of the glass and about its weight on the glass. This model helps when filling multiple glasses for a…
It's a double-walled holder for a stemless martini glass, with 3 ice packs stuffed into it. The idea is to pop the chiller into the freezer overnight and, when cocktail time comes around, bring it out and set your glass in it. Keeps your…
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…
Super cool case cooler :O, Requires a Single AA!, and a 1939K17_Low-Voltage Equipment-Cooling Fan from McMaster Car! the heat sink would need to be milled out, unknown efficiency of 3d printed heat sink cots only included in step.
There are no slim can beer chillers out there, so I decided to make one! This is printed in TPU so it has some wiggle room with the fitment, but this is a tight fit on a slim Michelob Ultra can, so it won't slip out when it spins. There…
General: A simple mount for a 500 BTU vortex chiller and an 80mm spindle Why I designed this: I designed this to mount an air chiller to my 80mm spindle for CNC milling without coolant. Printing notes: Split the model in your slicer…
This is a 3x3 Gridfinity container with a circle in it, just the right size for holding a Hyperchiller iced coffee maker.
Este es mi primer proyecto de bachillerato y de modelaje 3d, decidí inspirarme en una forma básica para hacer un soporte para celulares. Originalmente estaba diseñado para sujetar 4 celulares al mismo tiempo, pero debido a fallos en el…
An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…
Bottom face down, print with support to get the best result.
### Print Settings - Material: PLA or ASA - Layer height: 0.20 mm - Walls: 3 - Infill (main body and lid): 15–20% - Infill (tannichette / cooling inserts): 100% - No supports - Bed: 60 °C (PLA) / 90 °C (ASA) - Nozzle: 0.4 mm Tannichette/…
This thing keeps your beverages in 0.5l bottles cool for a while. If printed in PLA keep away from direct sun for longer time, it might deform. On the other hand PLA survives rather low temperatures. Update: actually it does not a good…
I like using a HyperChiller to make my iced coffee in my Keurig Supreme Plus. The chiller is too big to fit under the brewer with the standard cup platform installed. If you pull the platform out, the chiller will fit but the platform…
