Counting matching models…
This page contains STL files for CHIPO hexapod created by MAKE YOUR PET. The CHIPO is an open-source, 3D-printed, upcycling old android phone. You need : 3D printed parts 18 x MG996r 6 x microswitch 1 x servo 2040 piromoni or Pololu…
Planter for orchids. Helps to supply the roots with air. Integrated saucer.
Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…
Dog collar mount that fits the Chipolo One Bluetooth tracker device, compatible with the Apple Find My app. Rounded corners, no sharp edges. Collar hole: 30mm x 6mm (suitable for medium breed dogs) Filament used: Prusament PLA Gentlemens…
This is a similar concept to @repe 's Airtag holder , but designed for Chipolo One finders. I've attached two lid files, one for bicycle saddles with round steel rails and one for saddles with tall carbon rails. Both are held in place by…
Note that this model is a really tight fit. You have to put the collar through first, then wedge the Chipolo in like installing a recalcitrant shelf in a cabinet. See photos. Tilt the Chipolo and press through the ring from the side away…
I recomend a lower layer height for printing (due to the lip). 0.16 should be ok.
I designed this from the ground up. This case fits the Chipolo One. With the Find my Device Network Launching for android I've got a couple on the way for my bike and other stuff. I don't want to glue the thing onto stuff so this'll give…
This little holder will allow you to safely hide a Chipolo tag behind the Moustache Lundi 20's tail light. To install, remove the nuts behind the tail light, pull out the ring that holds the cable on the screw, insert the holder, then…
+++ This is a preliminary, untested model. +++
This is a model I designed for the Chipolo ONE Point tag, which I use on my cat’s collar. The ONE Point is advertised as splash-proof (IPX5), but in my experience it isn’t reliable. I made this case to fit the tag snugly while keeping it…
I use a Chipolo CARD tracker so that my phone warns me when I forget my wallet. This insert holds the tracker in place in the wallet and is almost invisible once inside. It has an indentation that follows the wallet's profile, so that the…
This model is to provide pets owners a housing to place gps tags on their pets collars
Remix of the original Apple AirTag version to fit the slightly bigger Chipolo One Point. The default version is off center to avoid clearance issues with the seat post and to fully hide the tag behind the lights. A symmetrical version is…
Needed a mount for a Chipolo Pop and nothing seemed to fit. This is a mod of Onshape Public "Chipolo Bottle Holder" that was sized for a smaller Chipolo one spot. The original design also had a curved bottom to fit a rounded downtube.…
Print 3 of the pieces and either glue or use versions with holes to screw them together. You should be able to print these parts flat and eliminate supports and if the part breaks with the hole/screw version you don't have to reprint the…
My broke after years of use, so I built a simple model to replace it. Installation step Remove the battery lid / the speaker side housing. Since mine was broken, it was easy to remove it from the broken part. You can refer to the video…
I recently purchased a bunch of Chipolo ONE trackers for the family and I love them. They are, however, a bit on the vulnerable side. I wanted to print a simple protector that would do the trick, but feel soft in the hand and not be…
Picked up some Chipolo One Point trackers with the intention of putting them on the dog collars in case they “escape”. My dogs were previously strays, so they retained the wanderlust. The dogs also play pretty rough with each other, and I…
Ever wished you could just swap out the battery of your chipolo card like with the other chipolo products? Here is a case that can house the internals of the chipolo card with a swapable CR2412 or CR2320 3V battery. I don't know yet how…
Chipolo one bracket for belt 25x1mm. It is solution for mostly for harness or collar where there may be obstacles. Printing instructions: PLA or PETG 0,20 mm layer height infill 15% minimal Print locks 2 times with size 97- 100% size,…
A two part bracket for a Chipolo One tracker. Designed for the Crivit Memory Foam City seat. The part fits snuggly under the seat, and had a hole to be able to press the button on the chip. It's hidden from sight. Print with the flat side…
This is a new version of the Chipolo Card insert for Ridge (or similar) minimalist wallets. The previous one was removable, but I wanted something that would not slide out of the wallet and that I would not be able to drop by mistake.…
Designed for Chipolo Classic (Nov 2017). Works with most standard cat collars, no tools necessary. See photos.
Finally, there are trackers available for Android too. I purchased a Chipolo ONE Point tracker, which can be easily hung on keys because it has a hole on its body. However, I would prefer to be able to hang the tag on a ring rotated…
I recommend printing with PETG and adding fuzzy skin to the inside of the hole for the flashlight. I used these 3d-printing suitable threads: https://github.com/dans98/Fusion-360-FDM-threads/
Simpel rescale of the model to fit the newer Chipolo ONE point.
A mount for the Chipolo tracker to be mounted under the saddle. The models should be split before printing to allow for mounting. You will need: - 3xM3 screws - 3xM3 locking nuts
Quick and dirty remix (done with negative shapes in PrusaSlicer) to fit a Chipolo tracker.
Warning : Case of chipolo is wrongly sized so need to be print at 100.9 % I use Rossm wallet but working with ridge too.
An insert to go in the wallet drawer part of https://www.printables.com/en/model/905865-wallet-v4-print-in-place to stop your Chipolo card from rattling around
There is a seam inserted into the model. Split the model to parts in your slicer before printing. For installation you will need a M5x30 screw with a round head and a hex socket As specified in DIN 912 Print with something durable (PETG,…
Simple holder to carry your Chipolo POP on your key ring. Has a cutout so you can press the button on your Chipolo and a Heightening to snap into the hole of it to provide a better fix. Print instructions: Material: Greentec pro (PLA…
After my bike got stolen and I was lucky enough of getting it back, I decided to get a Tracker for it. I decided for a Chipolo Pop, as it's cheap and works with android. After getting it i just needed a place to put it on my bike,…
Holds a Chipolo POP with handy loops to attach to a cat collar
I used Onshape to design a Chipolo Pop case for my Kindle. I printed a band for it in TPU found below. My design goals were to keep it simple and have it be as thin as possible, but still tough and durable. The band needs to be 16-17mm…
Modified the original top cover adding a slot for the Chipolo One Point. Features It is completely compatible with the original model Add the ability to always have a Chipolo tracker in the wallet Settings and build instructions are the…
I added a spot to attach a Chipolo. I also modified the design to add a lip so the remote won’t come out if it falls. I made a version without the Chipolo mount for those who don’t need it, including my other modifications. However, it…
Print as all your other wallet parts. Sized for the old model of the chipolo cards (the non-rechargeable one). Easily adaptable to other cards using OpenSCAD and the sources from…
Warning : Case of chipolo is wrongly sized so need to be print at 100.9 % I use Rossm wallet but working with ridge too.
Simple holder to carry your Chipolo POP on your key ring. Has a cutout so you can press the button on your Chipolo and a Heightening to snap into the hole of it to provide a better fix. Print instructions: Material: Greentec pro (PLA…
I used Onshape to design a Chipolo Pop case for my Kindle. I printed a band for it in TPU found below. My design goals were to keep it simple and have it be as thin as possible, but still tough and durable. The band needs to be 16-17mm…
Ever wished you could just swap out the battery of your chipolo card like with the other chipolo products? Here is a case that can house the internals of the chipolo card with a swapable CR2412 or CR2320 3V battery. I don't know yet how…
Chipo version never had a leg shield posted like the Chica version did. So I designed my own version from scratch. So don't use the first version with my modular femur remix that I created. Seems the top is long and catches on the cross…
Leg shield for leg tibia on makeyourpet.com, Chipo version. Posted an update. Upper screw hold wasn't thick enough at the bottom. Haven't tested this new file yet.
