Counting matching models…
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
Stop your cars from moving on uneven surfaces with these 3D printed chocks. Available in 3 versions: 25mm – suitable for 1:64 scale model 30mm – generic version for Hot Wheels cars 40mm – for Team Transport trucks
These wheel chocks will stop your Hot Wheels 1:43 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA_43 is easier to print and comes off the build plate…
This is a chock for the casters/wheels of a Steelcase Leap office chair. V1 was a chock that allowed the wheel's weight to rest on the floor. Without the weight on the chock itself, the friction between the chock and the floor wasn't…
This is useful if you have an office chair with casters and you want it to stop rolling around for some use or other, and also don't want to swap the casters only temporarily. You can stand a few of the casters on the blocks so that it…
Very simple and basic design (lacking details) of wheel chocks for Bruder 2750 MAN Breakdown-Truck. They serve to stop the car from falling down from the breakdown truck.
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
These wheel chocks will stop your 1:24 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! The design does not requires a brim or supports. The .gcode is included to make it…
Reduce the hanger rash to your RC Planes that can happen during transport. Easy to print Wheel Chocks that can be scaled for your model. These were printed with Overture Matte PLA with 2 wall and 20% in-fill. Brick Red PLA:…
Simple puzzle piece like wheel chocks for your Pinewood Derby.
For gamers without carpet who want to push rudder pedals without their chair sliding away, place one of these under your office chair's wheels. Fits a GTRacing chair--likely others. I used PLA. No supports needed. Post-print: Add a piece…
A friend of mine was looking for a new “Schocken” Set, but i couldn't find one with the right measurements in the web. So i took his old one andmade one with freeCAD. I made the stand in 3 parts, because i was not able to print it in one…
Lawn bowls or indoor bowls wedges. Work perfect Printed in PETG with large brim so edges dont curl up.
A set of chocks with the correct scale and height, as the wheel pants of the WACO are rather low. Additionally, the font and back chocks are joined which ensures that they will not shift if e.g. the plane is bumped.
Two variants of wheel chocks for a 1:38 scale model car. The first variant is a single chock for if your scale model has a different distance between wheels than mine. The second variant is two chocks, paired together for easy…
After a 35 mph wind blew my Pit Boss pellet smoker over (luckily no damage) i wanted to make something to keep it from sliding around. This is made for wheels that are 100 mm in diameter.
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
Corner chocks for keeping a TAS in place Easy to lift out if you don't want to screw down the TAS You'll need 4 of them (obviously) if you like this model then please donate to the Sanjay Mortimer foundation…
Simple PETG chocks for 410mm external diameter wheel + tyres, for use on un-braked trailers Prints on side without support. 30% in-fill. Threads with 12mm nylon cord. Those pictured had the reg number recessed. STL's and BGcode are…
Here is a set of wheel chocks for the Spartan SR trailer. The model includes the coloring to mimic the actual Spartan SR logo.
It's a pretty obvious one this, doesn't need low layer heights, works well in PLA. I used 30% infill on mine and glued cork sheeting to the underside. I made 5, but I only really need to use 2 on my chair. The chock is designed for 50mm…
These allow you to semi-securely transport your T'au Devilfish pattern vehicles without needing to modify the models. The small piece secures the front landing gear and the rear piece holds both rear landing gear. You will need 5 -- 5x2mm…
These wheel chocks will stop your Mini-Z cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! Fits wide and narrow wheel offsets. The design does not requires a brim or…
Light duty wheel chocks with recess for magnets. Step file included Please leave me a “Like” Thank you for downloading
🏎LDRC 1/18 Drift Chocks!🏎 Any Drift Car For 1/18 Scale
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
I made these to keep my Anker Everfrost cooler found sliding around in the trunk of our RAV4. We have the added benefit of having made a storage box for the chocks to be bolted to.
Simple, easy-to-print chocks designed to securely hold a 5-lb aluminum CO2 tank in place. Keeps your cylinder from rolling during transport. Print two Suggest 3 perimiters and at least 15% infill No supports needed
My brother asked if I could print him a set of wheel chocks for his RC Plane so that it would not bump around in his car while be transported. The smaller set are for my PKZone Extra300 and the larger are for his PKZone warbird and my…
I made this model as Extra security for my Lego vehicles on a shelf. Printed on Bambu X1. Its a simple print shouldn't have to do anything crazy. I used 3 Walls and 15% infill.
I travel a lot with my SCX6 in the trunk; it moved around a lot on its tray. Adding these kept it in place. You'll need to print two per wheel; you'll also need some ¼in rope/para-cord to connect them. I found it best to put the chocks…
