Counting matching models…
A stylish fidget spinner designed for performing tricks by spinning it around your fingers—an engaging way to entertain even your most imaginative companion! Simply print a chain to your desired length, attach the Ring and End pieces, and…
The source marked this model as adult content.
this is a pair of nunchucks i made about 7 months before i posted this but has some over hang but with the well tested printer it will be fine if you dont want over hang you can find a newer version on my profile
i was bored so i designed this
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
Nunchucks for event costumes like Halloween. For stronger chains and handles use a higher infill density. I used a 50% and my print is strong enough to smash cardboard boxes without taking damage. Model starts off large. Change sizing to…
Here's my version of Lego Ninjago Nunchucks of Lightning that's. They're scaled to fit a persons hand. On version is solid, one version has holes for batteries and leds. Be sure to post a make and check out my other models If you like my…
Here's my version of Mikey' nunchucks from TMNT. Print out two of the handles and 3 of the chain links. files split and fit a .5 in rod. Category: Props
This is a model of nun chucks. The chain is pretty strong but will break with a lot of stress. Supports: On
Made with TPU. Less walls and infill makes it more squishy.
This is a very basic print-in-place design for a pair of nunchucks. Please feel free to remix and improve on it! Would love to see what people come up with.
Collapsible Nunchucks! The collapsible handles thread into the chain part. The chain prints flat with the flats own, and the handles print upright with the threads up.
its low filament and print in place
Ya'll wanted it (alot) so here it is GUNCHUCKS!! Print with supports at least. With good bed adhesion, you won't need a brim. POST YOUR MAKES!! Be sure to leave a like so I can feel better about myself and make the front page! Print…
This is a three part retractable nunchuck. It was made to be printed from the beginner printer that I got which has limited print space (10cmx12cmx10cm). The chains are remixed from RobSoundtrack's Working Nunchaku…
IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…
Simple Chain Nunchucks Thanks for your support! We need your support as fresh air.
you've heard of Chuck Norris and You've heard of Nunchucks.... but now you too can be the proud owner of your very own pair of Norris Chucks! this is my first successful design in tinkercad so be gentle... I'm a fan of puns so when this…
The small nunchucks are perfect for so many things! Need a last minute part favor? Its got you covered! Need something to keep a small child at bay…I mean busy? The mini chucks have you covered! This file is a quick print and should be…
Prop nunchucks I made for my kid's Halloween costume. I printed these with lots of infill to give just a bit of heft and keep them from splitting along the layer lines. String them with paracord. This how-to video was the best I found:…
This is a Modular Nunchuck. Print any size attachments and adjust the Nunchuck size. NOTE: First time screwing on the attachments could be a bit stiff. After some time it will get easier to screw on. This print is pre-sliced with…
I am waiting for filament to arrive so I haven't tried to print these yet. If you make one please post the make and let me know what you think! I will add my print when my supplies arrive.
TAKES A 1/2 IN ROD SPLIT FOR PRINTING. BASED OFF THE ONES THAT COME WITH JAY ZX LEGACY. JUMP UP, KICK BACK, WHIP AROUND AND SPIN Category: Props
This 3D model represents a set of prop nunchucks , created specifically for display, cosplay, photography, or decorative purposes . The design captures the traditional look of nunchucks while remaining static and non-functional for safe…
Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 2,0 Infill: 35 Filament brand: Egal Filament color: - Filament material: PETG/PLA/ASA/ABS
Printed in three pieces, and no need for supports. You will need to print two of the nunchuck sticks. There is a dowel so you can put them together. You may need to use a mallet and probably won't need glue. These were made by my brother…
🐔 Chuck Chucks is here. Round. Feathery. Slightly unhinged. This printable cartoon chicken comes armed with nunchucks and a whole lot of poultry-powered attitude. Whether you print him in resin or FDM, as a single-colour beast or a…
This model is compatible with the lego system.
Do you have to fight ninjas? Do you also need to sign legal documents? Well this model is for you. There is a long and short version. The pen holder is the same size on both. These are the Pens I used. You can also find them at dollar…
Regal Prop Shop fabricated some of the TMNT weapons from the 2023 movie, Teenage Mutant Ninja Turtles: Mutant Mayhem. Now, you can download, print, assemble and paint your own with these files! Watch the full BTS video of how we built and…
I made this box, because the chucks adapters are always nowhere to find. The shaft is 4mm. Under each hole is the number of the chuck. 0,5 - 0,8 - 1,0 - 1,2 - 1,5 - 1,8 - 2,0 - 2,4 - 3,0 - 3,2 I have to print it once again, i did not…
Allows you to mount 4 Wii Remotes and 4 Nunchucks on a Skadis board while saving more space than the individual modular version. I printed with 0.4mm nozzle at 0.2 layer height 15% infill with tree supports which went well.
Simple triangle with magnets holds parallels on the lathe chuck for part alignment or in the milling vise. Keeps parallels from falling over while stock is setup. Purchase eight 3mm thick by 8mm diameter round neodymium magnets. Print the…
The PSI finishing jaws I originally bought are too large to fit on my 8" PSI lathe, so I modeled these 6" jaws to replace them. Fitment is measured directly off the OEM finishing jaws. Additionally, the OEM rubber work holders are on M6…
Zwei schöne NunChuks, bei der Punisher Version kann auch eine Schraube eingeführt werden und mit eine Ringmutter außerhalb abschließen.
I bought a Four E's vortex mixer and noticed the rubber cap came off. I then saw that there was a spot for an M3 screw, and designed up some simple chucks to hold onto paint bottles. Simple print in place design for your paint brand. I…
As the GOATA Chucks are way to expensive for me, I decided to 3D print them. The dimensions are: 10cm by 10cm by 3cm. There are two variants: Normal and Grippy one, the normal one has a flat surface whereas the grippy one has small dots…
Inspired by the WiiMotes of days past. This is my design entry in to the Printables: Remote Holders competition. I present to you the TV Remote Nunchucks. A super practical self defense tool (not really) and a great way to never lose your…
Chucks for mini grinders and engravers
Print with brim and supports, once supports are removed they will be a pair of functioning nunchucks.
You might need to rotate the print, if you scale it up 120%
This ring is attached to the top of the drill chuck of the drill with two 3mm screws. The ring makes it much easier to operate the drill chuck. Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.3 Infill: 80…
I made this little wall mount for my Nintendo Wii Nunchucks. The original version can be mounted with VHB tape, and there's also a version with holes for the kind of screws that usually come with drywall anchors! Also included is just the…
Inspired by the Zing Thumb Chucks fidget, and this model from thingiverse: https://www.thingiverse.com/thing:66824 You will need about 18cm / 5 inches of paracord (paracord is best but twine, yarn, etc can work too). Print 2 of each file…
Custom Foam Nunchuck Grips – Extended Comfort & Control If your foam nunchucks don’t have full coverage at the top, these custom 3D-printed grips are the perfect solution! Designed to seamlessly extend the foam grip, they improve…
Basic nunchucks that i made in onshape how to assemble (v2) only print the two models v2 part one and part two screw them together until snug now you have some nunchucks!!! (note v2 is made in favor of a smaller print area, that is why it…
This project was designed by Mark Li in collaboration with Casey Stengel. Link to Casey's page with our other office supply: https://www.printables.com/@CaseyStengel_2542632 About this project: Each nunchuck has a height of 10 cm and a…
Nunchucks that are split into 3 parts: the handles, the pins to connect the chain to the handles, and the chain.
These designs are a series of chucks for KW spin coaters. Three of them are adapted for silicon fragments of different sizes. They use O-rings of different sizes. The size is indicated in the file name with the first dimension being the…
Funchucks is a multi-purpose toy, it can be anything from nunchucks or a skipping rope to a dog toy! It's easy to print and can be done in less than a day, all you have to do is print two handles and two caps and connect them with a…
The wall mount is entirely my creation. I designed and printed it myself. The nunchucks are meant to be sized up to fit in the mount. The diameter of the handle is "2.4225" inches ON THE SHORT SIDE. The handle is NOT perfectly circular.…
A nuncheckulukmahuc for you're dummy 13. Whith three grips.
These were designed to be used as chucks for moulds, but can be used as tokens or other game pieces. Includes all of the Daggerheart domains, including the Dread domain recently released with the Hope and Fear expansion. If you do make…
there are a few instructions for it to work properly: a nozzle >0.5 mm supports touching build plate scale to around 4x or more must be sliced
I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.
A model of the nunchucks of lightning based upon the design from the lego ninjago tv show. The download includes the original blender file, stl and obj files as well as an stl file of the nunchucks seperated into parts for 3D printing…
🐔 Chuck Chucks is here. Round. Feathery. Slightly unhinged. This printable cartoon chicken comes armed with nunchucks and a whole lot of poultry-powered attitude. Whether you print him in resin or FDM, as a single-colour beast or a…
I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.
there are a few instructions for it to work properly: a nozzle >0.5 mm supports touching build plate scale to around 4x or more must be sliced
Basic nunchucks that i made in onshape how to assemble (v2) only print the two models v2 part one and part two screw them together until snug now you have some nunchucks!!! (note v2 is made in favor of a smaller print area, that is why it…
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
UPDATE 7/9/23: After posting this on Reddit, I received some feedback suggesting that I add a bearing to this model and I've done just that. I'm leaving the original version and adding .STL and .STEP files for the bearing version,…
I made this box, because the chucks adapters are always nowhere to find. The shaft is 4mm. Under each hole is the number of the chuck. 0,5 - 0,8 - 1,0 - 1,2 - 1,5 - 1,8 - 2,0 - 2,4 - 3,0 - 3,2 I have to print it once again, i did not…
Designed in Rhino3d, printed on a Bambu X1C on the new supertack plate. printed in PETG-HF with 10% infill and 3 walls. Inch tray took aprox. 7.5 hrs and 3.5 hrs for the lid Metric tray took 6.5 hrs and 3.7 hrs for the lid (a little…
Holder for dremel chucks for FERM tool. Its buyed on TEMU. I made it to fit inside my organisator and for me is working perfectly.
This is a simple yet fun and cool model that I designed for fun. It is very fun and can provide countless hours of entertainment. It takes less than 8 grams of filament and takes about 30 minutes for the shorter version and an hour on the…
UPDATE 7/9/23: After posting this on Reddit, I received some feedback suggesting that I add a bearing to this model and I've done just that. I'm leaving the original version and adding .STL and .STEP files for the bearing version,…
Just another goofy idea, it was either that or NunChucky with Chucky from Child's Play :D
