Search results: clicking

Counting matching models…

Printables

Clicking Fidget Toy

A fun clicking fidget toy that makes a clicking sound when you spin the wheel. Check out my other models! No supports for either of the models, but have the outside facing with the open part on the bottom.

Order a print of this model

Printables

small wheel clicking fidget

to build: put the wheel onto the rod, close the other lid thing onto the fidget with superglue. tip: for longer use, apply more superglue to the rod to connect it to the lid.

Order a print of this model

Printables

Print-in-Place 2 digit counter with built-in clicking mechanism.

Introduction Hello, hope you like the design. It relies pretty heavily on overhangs and tight clearances to make it Print-In-Place, as you can see in the following picture of a cross-section. It could be challenging to print so beware!…

Order a print of this model

Printables

Figet Clicking Wheel

Also check out my improved version Here ! :) Hi, I designed this Fidget Clicker under inspiration of this design https://www.thingiverse.com/thing:6744038 made by ItsOnMyMind Its quite easy to print. The model shown in the pictures is…

Order a print of this model

Printables

Fidget Toy tiktak magnet clicking

very easy to print but have a lot of fun with it. fidget clicker You need two sizes of neodymium magnets: Total 16x magnets 8* ø8mmx2mm in high 8* ø8mmx4mm in high hope you a lot of fun with it Print Settings Rafts: No Supports: No…

Order a print of this model

Printables

Clicking fidget knob

Clicking fidget toy Original model printed in white PLA with PVA support material at 15% infill

Order a print of this model

Printables

Clicking fidget toy.

Print pretty normaly you might need to rotate and no supports.

Order a print of this model

Printables

Figet Clicking Wheel Version 2 Improved

Make sure to enable "detect thin walls" for printing! Hi, this is my improved Version of my Fidget Toy. It features a lighter and more consistent spring design which can also be removed. If you are not happy with the resistance you can…

Order a print of this model

Printables

Clicking fidget toy

A little clicking fidget toy. You may have to mess with the spring and wheel to get it loose enough to work.

Order a print of this model

Printables

DJ CONTROLLER FIDGET CLICKING WHEEL

This toy is a remix of a famous fidget toy, to make it look like DJ controller. Customizable click feeling and case design you can choose from: Two types of springs - Hard or Normal Three types of gear wheels - 40T, 28T or 20T (20T has…

Order a print of this model

Printables

Sliding Clicking Fidget

A super satisfying sliding and clicking fidget. Very pronounced loud clicking. Use super glue if the pieces don't stay together. Make sure you use supports on the slider part.

Order a print of this model

Printables

Spring Clicking Fidget

A simple but fun fidget that clicks when moved sideways.

Order a print of this model

Printables

Penticton Robotics Style - Fidget Clicking Wheel 2.0

Gold and Black styled fidget gear. Designed for a handout for the Penticton Robotics Team

Order a print of this model

Printables

Fidget Clicking Wheel Keyring

I loved the creation that was made, but I wanted one to put on my keychain.

Order a print of this model

Printables

Fidget Clicking Wheel

Order a print of this model

Printables

Clicking Salt & Pepper Mills

Clickable Salt & Pepper Mill – Play Kitchen Accessory Bring your little chef’s play kitchen to life with this fun, interactive salt & pepper mill! Designed with a simple clicking mechanism , kids can twist the top and feel a satisfying…

Order a print of this model

Printables

Clicking Fidget Toy

Order a print of this model

Printables

Fidget Clicking Wheel Keychain

Keep your hands busy and your mind focused with this compact, satisfying fidget keychain! Designed for endless clicky fun, the wheel spins and clicks with every turn, giving a tactile, stress-relieving experience wherever you go. Perfect…

Order a print of this model

Printables

clicking scale (additional parts needed)

I wanted to have a small scale for my pocket to use for self-checks inbetween / rating my mood and energy. Therefore, I created this model. Additional parts needed (see pictures under documentation): elastic cord (about 1.5mm or 1/16 inch…

Order a print of this model

Printables

5 Clicking Button Fidget

A simple, small fidget with 5 springy buttons on it! Use it when you are bored, in class, or just want to have a bit of fun! Check out my other models on my profile!

Order a print of this model

Printables

small wheel clicking fidget

to build: put the wheel onto the rod, close the other lid thing onto the fidget with superglue. tip: for longer use, apply more superglue to the rod to connect it to the lid.

Order a print of this model

Printables

G2ZXL Clicking fix

One of my G2ZXL clicked really bad, modified the stepper mount to have deeper countersinks

Order a print of this model

Printables

ORIGINAL PRUSA MK3S Idler Door Remix - extruder clicking fix - under extrusion fix

I was having the infamous clicking/idler gear slip issue due to the idler axle slowly sliding out of the axle supports. This would then cause under-extrusion and, of course, failed prints. This remix removes the wholes from the axle…

Order a print of this model

Printables

Fidget toy - Clicking Wheel

Guys I'm back. Introducing a new finger toy! If you like the model, please rate it!

Order a print of this model

Printables

Fidget Clicking Wheel

This fidget wheel provides a clicking feeling. The click feeling can be adjusted depending on the spring, a 3 mm spring has the hardest click. Print Settings: Material: Spring should be printed with PETG. Other parts, PLA will work fine.…

Order a print of this model

Printables

Clicking Ratchet Fidget

Clicking ratchet fidget toy, easy to print and assemble. Ensure the parts are laid out before printing, do not print in place. Assembly: Place ratchet arms in wheel Place spindle in wheel hole Place knob through spindle Push fastener onto…

Order a print of this model

Printables

Clicking Hinge

This hinge has a click feel and can hold an angle, can be assembled with snap-fit. Print settings Material: "InnerGearSoft.stl” should be printed with flexible filament. Other parts, PLA, PETG will work fine. Layer height: 0.3mm Supports:…

Order a print of this model

Printables

Anti-stress Clicking Gear

What parts do you need? 1 spring (from pen or other) 3 3M screws The top case, bottom case, clicker, and the gear. How to assembly? Take the top case and the bottom case (1. step) Apply the gear (2. step) Apply the clicker (3. step) Apply…

Order a print of this model

Printables

Fidget Clicking Wheel 2.0

This toy is designed you get a click feeling sensation when you rotate the wheel. Slim body for cool appearance and good click feel! What is Fidget toy?: A fidget toy is typically a small object used for pleasant but purposeless activity…

Order a print of this model

Printables

Fidget Clicking Knob

You can feel like operating a printer anytime, anywhere!? This rotate fidget clicker is use real mk3s LCD knob. You can use knobs that are compatible with stock. Print Settings: Material: PLA, PETG Layer height: 0.20mm Supports: no…

Order a print of this model

Printables

Fidget Ring Clicking Wheel

Remix of the popular fidget clicking wheel from user @BaGoon. https://www.printables.com/model/231691-fidget-clicking-wheel-20 I've included one of the parts to have a finger ring for pistol style spinning action. It also works nicely to…

Order a print of this model

Printables

Fidget Clicking Wheel Remix

I really like the Fidget Clicking Knob, but I couldn't get it to print right for me and I didn't like how the case showed the spring and I wanted on without “Prusa” on it. I've gone through several versions (because I'm a beginner…). This…

Order a print of this model

Printables

Fidget Clicking Wheel V2.5

I printed a few of BaGooN's design before deciding to add a few modifications. Was struggling to get a clean fit and had to post-process the case each time. This remix changes the connection between the two cases so that it's easier to…

Order a print of this model

Printables

Fidget Clicking Wheel Case Remixes

Update: On v3 of the Starry and StarMoon case the shapes go all the way through, eliminating the need for a filament change. --- Update: I've added 2 new designs, a starry case and a moon and stars case. These are really cool to pair…

Order a print of this model

Printables

Fidget Clicking Wheel 2.0 Smiley Case

The case looks like a smiling mouth. Print Settings: Material: PLA, PETG Layer height: 0.15 - 0.20mm Supports: no Perimeters: 2 Download Gear wheel and Spring here: https://www.printables.com/model/231691-fidget-clicking-wheel-20 My Other…

Order a print of this model

Printables

MysteryDough’s Clicking Life Counter

** UPDATE 2018-11-10 halved post width. They are less stiff and the wheel gap is more pleasing in relation to wheel width. This also shrinks overall footprint. added single, triple, and double-double versions. ** UPDATE 2018-10-21 slimmed…

Order a print of this model

Printables

Improved clearance for fidget clicking wheel case A

I created more of a gap between the parts that connect so that there is a smoother operation of the wheel. It is also easier to assemble now. If you have trouble with this model's tolerances, try this remix.

Order a print of this model

Printables

Satisfying Clicking Fidget Button

This snappy fidget button is extremely satisfying and a pleasure to hold in your hand, and easy to print and assemble, the required force can be set in 9 steps, does not require any additional parts, just a few drops of lube to start…

Order a print of this model

Printables

Keyfob Cover for Fidget Clicking Wheel 2.0

Keyfob cover for Fidget Clicking Wheel 2.0 by BaGoonN https://www.printables.com/model/231691-fidget-clicking-wheel-20

Order a print of this model

Printables

Bistable clicking fidget switch

A simple fidget toy in a form of togglable, bistable switch with a built-in spring. The 2 available models have different spring forces. Designed for 0.5mm line width and 0.5mm clearances, but should work with a 0.4mm nozzle just fine. It…

Order a print of this model

Printables

Double case for Fidget Clicking Wheel 2.0 by BaGooN

Since I printed the first one, my kids kept coming and asked for more. And then we had an idea to extend to double clicker. I hope you like it, happy printing, happy clicking. Please download the wheels and springs from the original model.

Order a print of this model

Printables

Ratchet Fidget Ring Print-in-place (Clicking!)

Update I redesigned this model. You can find the new version here: https://www.printables.com/model/859158-clicking-ratchet-fidget-ring-20-print-in-place A simple fidget ring featuring a ratchet mechanism to make it click! Have fun! This…

Order a print of this model

Printables

Fidget Clicking Wheel 2.0 with Pawprint Case

Changed the pattern on the case to pawprints. Enjoy! See original model for any further instructions.

Order a print of this model

Printables

Double Clicking Mouse Repair

I have had to fix my mouse "double clicking" a few times before. For mechanical mice it is a relatively simple repair that has good tutorials on youtube already. The repair requires you to open the mouse, open the mechanical switch, and…

Order a print of this model

Printables

Print-in-Place 2 digit counter with built-in clicking mechanism.

Order a print of this model

Printables

Case remix for Fidget Clicking Wheel 2.0

A new case design I created for Fidget clicking wheel 2.0 by @BaGooN with circular holes. original design ← check it out! You will need wheel and spring files from it to complete this. Print instructions are on that page, but I print it…

Order a print of this model

Printables

button clicking fidget

First, put the spring into the main part. next, put the button. last put on the cap and click!

Order a print of this model

Printables

Functional Fishing Rod pool/tub toy - left hand accessible - makes clicking sound

Left handed alternative: 4 piecesare right handed or left handed - print according to your needs (I hope I can make a few left handed kids happy :)). Print the left handed versions (found in the left handed alternative folder) of this…

Order a print of this model

Printables

Clicking Ratchet Fidget Ring 2.0 (Print-in-place)

This is a redesign of my original Ratchet Fidget Ring now optimized for more clickiness. Overview The ring features a ratchet mechanism to make it click and can be printed in one piece (print-in-place). The inner diameter is 18mm but I…

Order a print of this model

Printables

Clicking Ratchet Fidget Caps

These caps allow you to better hold the inner ring to spin the ratchet without having to wear it. Designed in the model are arrows that tell you in which directon the ratchet spins (make sure to install it correctly). Make sure to print…

Order a print of this model

Printables

Magnetic hat clip for Clicking sharpie

I often need to access my sharpie with one hand and would rather spare my teeth biting down on a cap, as well as the inevitable lost caps that leave most sharpies to a dry half used fate. But that's why I like clicking sharpies. This hat…

Order a print of this model

Printables

GUN - Gravity Utility Knife (Clicking slide button)

You need files from the original GUN model. This remix replaces two parts to add a small clicking mechanism to the slide button for opening/closing the knife. This small click makes the knife more secure in the closed and opened…

Order a print of this model

Printables

Figet Button V2.3.7 (MAKES CLICKING SOUND)

funny thing

Order a print of this model

Printables

REMIX: Pokemon TCG damage counter with clicking wheel

This handy and nicely clicking damage counter is small and satisfying to use. Only 5mm height. Other side of the counter you get numbers 10-100 in 10 point steps and other side of the wheel numbers 110-200 in ten points steps, I had a bit…

Order a print of this model