Search results: cocoon

Cocoon Remote Stand - Two sizes

Prints with no Support Fits on Prusa Mini

SH-A1 仿生茧 Biomimetic cocoon

Cocoon Supports for tall-thin screws of Quadruple Portal Desk Toy by Ada Cohen

The tall-thin screws of this toy are easy to make out of machined billet, 3D powder binding, and 3D resin. It is VERY difficult using 3D FDM (filament) printers because they are tricky to support. Laying the parts down would work, but the…

LAMPE COCOON-Lampe à poser

La lampe cocoon tient sa forme d'une ellipsoïde, forme que j'apprécie particulièrement. Je me disais qu'en enlevant des morceaux à ce volume, un peu comme on croque dans une pomme, j'obtiendrai des arêtes vives qui sont toujours…

Wanhao/Monoprice/Cocoon Create i3 Mini Reinforced Filament Guide

Remixed to reinforce the neck and mount to make this filament guide stronger. I had two break on me. One while moving the printer, one when loading/unloading filament. This will require two M3 10mm or M3 12m screws as the base is thicker…

Cocoon - 1985

Cocoon - Wilford Brimley, Hume Cronyn, Jack Gilford, and Don Ameche - 1985 3D printable model.

Cocoon - Walter - 1985

Cocoon - Walter (Brian Dennehy) - 1985 3D printable model.

Cocoon - Kitty - 1985

Cocoon - Kitty (Tahnee Welch) - 1985 3D printable model.

Cocoon - Jack Bonner- 1985

Cocoon - Jack Bonner (Steve Guttenberg) - 1985 3D printable model.

Mason Bee Cocoon Storage Box

This is a remix of the bee incubation box . I printed one and it was perfect for releasing mason bees as they hatch from their cocoons. However, I wanted something for winter storage after harvesting cocoons from their bee house. I sealed…

Chromecast Remote Adapter for Cocoon Stand

I really liked the look of this remote holder model but unfortunately my Chromecast remote didn't fit. It was too short. so I designed a small adapter that can be glued into the first slot.

The ultimate Wanhao i3, Cocoon, Balco i3 upgrade/mod: Hulk Fix!!!

Feel free to remix this to give us a Prusa Hulk repairman. Maybe as an extrusion indicator. :D Presenting: 'The last modification you will ever have to do to your Cocoon Create Touch!!!". For many years I've strived to make the CCT/Wanhao…

Cocoon Flowerpot

https://youtu.be/Idr-xLA14xI Cocoon Flowerpot is a combination of two pots, where one serves for the water to be poured and stored while the smaller pot is reserved for ground and plants. They are both printed at the same time, and they…

Wanhao/Monoprice/Cocoon Create i3 Mini Reinforced Filament Guide

Remixed to reinforce the neck and mount to make this filament guide stronger. I had two break on me. One while moving the printer, one when loading/unloading filament. This will require two M3 10mm or M3 12m screws as the base is thicker…

Wanhao / Monoprice / Cocoon Create I3 Plus PTFE Liner cutter

PTFE Tube cutter use a Razor blade and use slot 1 and 2 like a pencil sharpener Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25 Category: 3D Printer Parts

Thumbwheel for Wanhao Duplicator I3 / CocoonCreate

Simple thumbwheel for Duplicator I3 and Cocooncreate machines. The thumbwheel has an embedded M3 nut dimensions 5.97mm (flat to flat) and 2.50mm high. You will need to set your slicer software to pause at around the 3.5mm - 3.6mm mark…

Monoprice MP i3 Mini (Wanhao, Cocoon, PowerSpec) filament spindle

I wanted to save some filament and time to print, so I hollowed out the filament holder but kept the strength to carry the weight of a full roll. Print with 3 walls and 5 top and bottom layers. TinkerCAD file:…

Wanhao i3 Plus/ Cocoon Create Touch X-axis ratcheting belt tensioner

Technically, this isn't a remix, as it is an entirely new model, however the idea is based on previous versions, such as the remixes of PlasticCow's original belt tensioner by JF Chabot, Amzak, AlexWYYC, and others. Main features are:…

Wanhao i3 plus/Cocoon Create Touch zip tie rod holders

Yep, sorry. More square nuts. You should buy square nuts anyway. They are very useful way of attaching things to prints, and easy to include in a design. :P Anyway, these rod holders are to replace the little aluminium rod holders. They…

2020 Y upgrade for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers.

This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket. This mod gives you stronger y motor bracket and a better idler tension . Also changes the belt path to be…

Cocoon Create Touch / Wanhao i3 Plus Y axis idler brace

print3Daus made a really tidy brace for the Y-axis idler of the Cocoon Create Touch / Wanhao i3 Plus. However, apparently there have been some revisions to that part. His idler holder was a plastic injection moulded part, whereas the…

Wanhao Duplicator i3 or Cocoon Create Plus Raspberry Pi Camera v2.1 mount (OpenSCAD)

Wanhao Duplicator i3 or Cocoon Create Plus Raspberry Pi Camera v2.1 mount (OpenSCAD) Author: Brian Khuu (2019) I use this in conjuction with sticking "Wanhao i3 Clip on Raspberry Pi Octoprint Case" by suzujoji…

Part fan duct for Cocoon Create Touch

This is a duct to be used on the Cocoon Create Touch with the mounting bracket from Gascat's High Performance cooling assembly: https://www.thingiverse.com/thing:2084339 The original duct couldn't quite reach the heating block on the CT…

Wanhao Duplicator i3 or Cocoon Create Plus Hex Tool Holder (OpenSCAD)

Wanhao Duplicator i3 or Cocoon Create Plus Tool Holder (OpenSCAD) Author: Brian Khuu (2019) You can customise it for other printers with folded metal frames, but this is designed primarily for wanhao printers or aldi cocoon create. The…

Shorter (Z Axis - 6mm) MOSFET Mounting Bracket for Monoprice Maker Select V2.1, Cocoon Create, Wanhao i3

Remix of patprint's remix of uwe999's remix of rawlogic's MOSFET mount to be shorter in the Z dimension from 8mm to 6mm. The reason I remixed it is because 8mm is taller than the stock standoffs in the maker select v2.1 control box.…

Filament Sensor Mounting Clip For Cocoon Create Touch and Wanhao i3 duplicator plus Rev2.0 (Clips to NEMA17 motors)

By Brian Khuu 2019 This is for a cheap filament sensor, that you can usually find on ebay. This time it will clip right on to the NEMA17 extruder motor of a Cocoon Create Touch and Wanhao i3 duplicator plus. Rev1:…

Cocoon Pendant Lamp

🧶 Cocoon Pendant Lamp | Modern Textured Hanging Light Inspired by the elegant cocoon form found in nature, this modern lampshade features an organic flowing surface and intricate cellular texture that adds an artistic touch to your living…

Wanhao I3+ Cocoon filament spool holder

I have a variety of filament spools, some have only a 10mm hole, most are wider than the holder, I also wanted a guide and tension control for the filament, these have a couple of holes underneath the front that take 6mm of a 3mm screw…

Wanhao i3 plus/Cocoon Create minimalist enclosure

This is an enclosure for Cocoon Create/Wanhao i3 Plus 3d printers. Mine is constructed from 6mm acrylic, but you could also use MDF or plywood. This enclosure has been designed to allow easy access to the power switch, while still…

Wanhao Di3 / Cocoon Create Touch / Monoprice Makerselect flexible feet

The standard feet on these printers suck. They fall off easily and do little to dampen vibrations. This part is designed to be printed in TPU and solve these two problems. Print settings and design process covered in detail here:…

Bondtech BMG for the Cocoon Create Touch

Geared Bondtech extruder for the Cocoon Create Touch/ Wanhao I3 Plus. This extruder uses the existing heatbreak, in my case the Micro Swiss all metal heatbreak. I wanted to try the geared Bondtech drive, but did not want to have to…

Cocoon Planter – Galaxy Series

Part of the Galaxy Series , the Cocoon Planter features a soft, organic form with futuristic geometry – a perfect blend of nature and design. Its stacked-ring shape evokes cosmic cocoons or asteroid belts, making it a sculptural…

Cocoon Create Plus Belt Tensioner

I remixed AlexWYYC's belt tensioner so that you can use the stock bolts for mounting it. I've also included ojmalik's modified knob to make this thing complete. Additional parts required 1 M3x20mm bolt 1 M3 nut 1 small cable tie…

Cocoon Create Touch / Wanhao Y Plane Hot Bed Handle

Simplified remix of xenz hot bed handle to avoid the need for supports when printing Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: 3D Printer Accessories

Dual Stovetop Firestop mount Mounting Clip For Cocoon Create and Wanhao i3

Dual Stovetop Firestop mount Mounting Clip For Cocoon Create and Wanhao i3 I previously created a mount for mounting on the roof, but this may be more convenient for folded metal 3d printer frame. 3D printer Frame Clip [<====y====>] [ ^ ]…

Filament Sensor Mounting Clip For Cocoon Create Touch and Wanhao i3 duplicator plus Rev1.0

This is the OpenSCAD code that was used to make the above clip for holding the filament runout sensor from ebay. Rev2: https://www.thingiverse.com/thing:4318121 - This version mount to the extruder motor instead. Configuration that worked…

freestanding spool attachment for Wanhao Duplicator i3, Cocoon Create, Maker Select i3 3D printers.

If you need to place your spool holder for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers, (designed and tested for Wanhao Duplicator i3 assumed sameness) somewhere other than the top or controller box.…

Sofa Bed Back Rest Metal Protector 50% and 100% Attachment (Cocoon)

The Sofa Bed "attachment" is for protecting the fabric from the metal part that connects the backrest for the Sofa Bed. Please note that this attachment was designed for the cocoon alice sofabed and might not work with other sofabeds that…

Z Extension with Caliper Cradle - Maker Select/Duplicator i3/Cocoon Create

I've had Azza's Z Extensions for ever, but recently thought they'd be a good place to cradle my calipers to get them out of the way. I remixed his design to include a caliper cradle. Both left and right sides are included. I hope it's…

Teaching Tech remix mount for Wanhao I3 plus, Maker Select Plus, Cocoon Create Touch

Modified the Teaching_Tech_camera mount - base -_prusa_i3.stl with Fusion 360 to allow it to fit my Monoprice Maker Select Plus horizontal gantry. Clips on the top of the frame Print Settings Printer Brand: Monoprice Printer: Maker Select…

Mason Bee Cocoon Storage Box

This box is 6"x3" with a slide lid. Instead of a divider inside the box I made an additional small box to hold a wet cotton ball.

Cocoon - 1985

Cocoon - Wilford Brimley, Hume Cronyn, Jack Gilford, and Don Ameche - 1985 3D printable model.

"Cocoon" Fragrance Diffuser

3D Printing Settings No supports Printed in PLA. Infill: 5–15% Layer height: 0.2 mm Average print time: 10 hours Dimensions: Height 19 cm, Depth 7.5 cm, Width 21 cm Glass dimensions: Height 12 cm, Diameter 3 cm Irregular surface: Point…

Cocoon - Jack Bonner- 1985

Cocoon - Jack Bonner (Steve Guttenberg) - 1985 3D printable model.

Cocoon - Kitty - 1985

Cocoon - Kitty (Tahnee Welch) - 1985 3D printable model.

Cocoon - Walter - 1985

Cocoon - Walter (Brian Dennehy) - 1985 3D printable model.

"Baby Cocoon" Fragrance Diffuser

No supports 3D printing settings Printed in PLA. Infill: 5–15% Layer height: 0.2 mm Average print time: 5 hours Dimensions: Height 14.5 cm, Depth 5 cm, Width 13 cm. Glass dimensions: Height 12 cm, Diameter 3 cm. Irregular surface: Point…

'Instant Cocoon' Table Clock

3D Printing Settings With supports: Clock Without supports: Hands and base Printed in PLA. Infill: 15% Layer height: 0.2 Fuzzy skin: (Clock and base) Point distance: 0.8 Thickness: 0.3 Average print time - Clock: 6h - Hands: 10m - Base:…

Laces Cocoon

Your feet cocooned in shoelaces? A shoe that looks as if you wrapped a thick shoelace around your foot! A flexible 3D printed and washable custom-fitted monomaterial shoe. A sophisticated scalable 3D model with several components, to…