Laser Engraver Zero Tool Mecpow X3
The laser sits about 20 mm from the outer edge of the laser module. This tool can help to find the zero point. Print Settings Supports: No Resolution: 0.2 Infill: 20 Filament: PETG
- Downloads
- 292
- Likes
- 15
- Rating
- 0
45 models
The laser sits about 20 mm from the outer edge of the laser module. This tool can help to find the zero point. Print Settings Supports: No Resolution: 0.2 Infill: 20 Filament: PETG
When I wanted to transfer my current toolbox from tecpo with a lot of SAE sockets and wrenches I found the gridfinity system. Because I did not find suitable boxes which are fast and easy to print with a minimum amount of material I…
Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi CPO model reimagines Captain Phasma from Star…
Replaces the original foam/plywood motor mount for any electric aeroplane that uses two pieces of 6mm depron foam crossing to form the motor mount bulkhead. Print in PETG for toughness and heat resistance, 0.2mm layers and 50% infill. No…
A support for Teccpo TDHDOP drill. Can be mounted on ceiling or wall. If you like my designs give me like and share. If you like them a lot invite me to a coffee. https://www.buymeacoffee.com/kjbturok…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Motor mount for use all in RC Powers park jets. https://rcpowers.com/community/
I had issues with the X-axis cable interfering with the machine when printing close to home on the Mecpow X3 Pro laser engraver, and the same goes for the air assist line. I created this to lead both cables/lines up and away from the tool…
A Teccpo ZPK18HS battery wall bracket with three screw holes. I do not know if it is valid for other batteries of the brand. If you find out if it is compatible with other models of the brand please share it in comments. Thank you.
Free up space on your crowded workbench and hang up your work of art. Uses two nail to attach the mount to the wall. Has curved mounting finger to match that of the curved prop slot used in V5 RCPowers park jets, however should fit any…
This model is intended for makers building electronics to include in their design process, as it removes the extensive process of measuring this part to fit when designing your wonderful lamps/clocks/etc. It is a replica of the PSU sold…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Ornaments for the two CPop groups X-nine and TFBoys Do you have other groups you like? Let me know and I will add them. @3DPrintBunny My CPop and KPop designs along with other designers work can be found in the KPop 3d Printing group…
This is a wall mountable case for the 110/220V to 5V 2A PSU, model number JCPOWER JC-10-5 that can be found cheaply on Ali Express. It is the first public model produced using the model I have created for this power supply that you can…
Piedi per incisore laser Mecpow X3 Pro, utili per poter fissare l'incisore su di un tavolo da lavoro o un pannello, in modo da porter centrare correttamente l'honeycomb (nido d'ape) Per eventuali consigli su migliori ecc. sono a…
This quirky flower pot brings instant personality to any space. Sculpted with an exaggerated smiling face and standing proudly on chunky cartoon-like feet, it turns your plant into a character of its own. Perfect for anyone who loves…
I had issues with the stability of the laser module and therefore created an extended rail. You will need 2 x M3 x 4 mm countersunk screws. My Print Settings Walls: 4 Brim: yes
Since creating the first version, my 3D CAD skills have improved a little, allowing me to design V2 with more clearance to prevent the tube from kinking My Print Settings Walls: 4
I've decided to start experimenting with 3D printing heatsinks and have made a few quick designs to test with. I show an image here of these printed with copper-embedded filament that I have, but I plan to also try PLA and TCPoly Ice9…
To further improve the stability of my laser gantry, I designed a screw-in stabilizer. I used 3.5 x 10 mm metal screws because I had no shorter ones. Measure the width of your gantry before printing.
exhaust duct for my mecpow x4 pro to connect to the cimney diameter duct hose 73.30mm base 100 x 70 mm
MODEL SPECIFIC SAFETY PREFIX: Some (but not all) of the shipping power supplies with this model number have a big sticker over most of the holes on top of the unit that are designed to assist cooling. Please remove this sticker from the…
Just a little cave for some fish or other animals. Supports: No
Deport de ventilation pour mecpow x4 pour le mettre contre le mur et gagner le la place s'adapte avec le ventilateur et les vis d'origine As imprimer avec des support arborescent comme sur la photo
After a while the SonicPoint wireless access point mounting tabs seem to go brittle and break (at least in my experience), this model does not use the original mounting tabs but securely clips around the WAP instead. Clearances and…
This is a gridfinity holder to hold the 4 colors of the Pilot V5/V7 Hi-Tecpoint refillable. I use it on my desk to have easy access to the pen and easily switch from one to another. Printed in PETG.
Ein Stiftehalter für die Pilot Stifteserie V5 oder V7 Hi-Tecpoint mit Patronen. Die STL ist ein komplettes Modell. Die Step-Files können gemeinsam geladen werden und dann bei einem Mehrfarbensystem entsprechend konfiguriert werden. Viel…
Snap On figurines for Infinity Headband. https://www.thingiverse.com/thing:3663133 his thing was made with Tinkercad and Inskcape Category: 3D Printing
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Mecpow x3 Laser Calibration Tool Holder.
English Tutorial Obtain a 120mm fan and a 12V power supply Add 8 M3 brass inserts using a soldering iron (to the 4 corners and on each side of the fan) Attach the carbon filter bracket with M3 screws (on the side with the fan label)…
The Story Behind It, I love the Mecpow P50 for its compact size, which fits my workspace perfectly. However, even with its filters, I wanted to be 100% sure that no residual smoke or odors stayed inside. I needed to route the exhaust air…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi CPO model reimagines Captain Phasma from Star…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Since creating the first version, my 3D CAD skills have improved a little, allowing me to design V2 with more clearance to prevent the tube from kinking My Print Settings Walls: 4
Deport de ventilation pour mecpow x4 pour le mettre contre le mur et gagner le la place s'adapte avec le ventilateur et les vis d'origine As imprimer avec des support arborescent comme sur la photo
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…