Counting matching models…
It works, it is loud, it is now in 4-tones at once! Use at your own discretion. Printed at 0.25mm layer with a 0.4mm nozzle. Use PETG(preferred) or PLA. Make sure you align the Z-seam along one of the valleys between the chambers. See my…
Source: https://www.thingiverse.com/thing:455093 Summary This is a pocket sized turbo whistle or siren which emits a loud and extremely annoying WHEEEEEEEEEEE when you blow into it. This design was inspired by Instructables user Kiteman,…
A coworker gave me the idea a while back and I finally made it real. It works, it is loud. Use at your own discretion. For best results try 75-90PSI, much over that it overloads the whistle and gets quieter again. Printed at 0.25mm layer…
This is a pocket sized turbo whistle or siren which emits a loud and extremely annoying WHEEEEEEEEEEE when you blow into. Remixed from: https://www.thingiverse.com/thing:455093
A cute-but-creepy chibi zombie with both arms raised, torn clothes and big sneakers. Perfect for Halloween displays, game tables or spooky shelf decor.
This is a theoretical 1HP siren for ACA's Screamer series. Uses the core of an ACA Hurricane MKII, now as a vertical omnidirectional naturally aspirated siren. Probably would be a Klaxon SS6 competitor. Doubt it would be able to compete…
Patch notes: Removed fillet at base (reduces warping when printing) Added printable files in 4 different sizes Updated CAD files to v2
This lets you fire the 15mm flares or scare cartridges (screamer, whistle, banger etc) from a 37mm launcher simultaneously. there is a slot for a rubber band that will hold them in place so they don't all fall out if tipped. you simply…
I like having a couple different flavors of creamers on hand for my coffee in the morning. Since we get our creamer in bulk, I needed something small enough to fit in my kitchen cabinet cupboard, but large enough so I wouldn’t have to…
I provided a MK3s gcode file for PETG. I made these to be used outside, so i used PETG, not PLA> inside PLA would probably be fine. Happy printing!
I wanted a place to neatly store my coffee creamers for the week. I designed this to hold 7 coffee creamers. It can lay down flat, stand up, or you could even use some double stick tape to put it on the wall. The holes for the creamers…
Connect the lid and the box together with a piece of filament used as a hinge pin. If desired, the lid and the box can be closed with 2 magnets of 6 x 3 mm. The layout of the box is 2 compartments for different flavors of tea bags. The…
Here it is!! The new member to the 1/4 scale ACA lineup is the Screamer 105!! This project is very special to me since I got the privilege to actually see one in person be the first to take measurements and inside photos of it along with…
~1/3 scale Completely remastered this because I wasn't happy with V3. Contains a more accurate chopper and is made for a different motor. Made on Tinkercad: https://www.tinkercad.com/things/6L614OmHl5k-screamer-s-10-912-print-v4 PRINT ALL…
I decided to take an already awesome screamer toy and add a ring on it to make a keychain. Thank you AndyGadget for this fun screamer!! https://www.thingiverse.com/thing:455093 Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
I used my bottle cap generator to create this cap for coffeemate creamer bottles. See: https://www.printables.com/model/633902-threaded-bottle-or-jar-cap-generator-for-fusion-36 I printed in ASA so I could put it in the dishwasher.…
A case for single-serving liquid coffee creamers, Coffee Mate or similar. Print the lid in something flexible, it's tight on purpose. I included a Case and Lid that'll hold 6 creamers, as well as Base and Tube components for you to put…
You learn to watch the water, you learn to watch the logs, and just when you think you're safe, you learn to watch the trees. The Mire Screamer is a wendigo-sized horror of gnarled mangrove roots and swamp moss, given a hateful…
The 3MF file includes enabled Ironing settings in PrusaSlicer.
The other parts of the Screaming Snowflake from here: https://www.printables.com/model/344501-screaming-snowflake PS: I haven't printed this one, so I don't know how it sounds.
Model Siren. I didn't find a detailed S-10 so I made one myself. Might add fake holes to represent the chopper.
this is a cow creamer i got an idea for from a youtuber who had one. being broke i decided to model one and print it. I found the original design from devinpeterson then i changed the model by makeing it hollow and functional. Category:…
A simple dispenser for the individual coffee creamer cups. I guess this could also dispense all kinds of other things as well... Let me know if you find another use for it. Print Settings Printer: Monoprice Maker Select Plus Rafts: No…
For the life of me, I cannot open the little coffee creamers without making a mess. I don't know what it is. It happens no matter how careful I am. I guess I'm just coffee creamer challenged. Whenever I peel the end off…bam… lots of…
This model is NOT my original creation ; it is simply a reupload intended to make downloading easier and more convenient for users on Printables. The model is currently in early access , and all rights, ownership, and credit belong…
This is a holder for half and half or creamer or something else.
This is a replacement part for the "cage" that holds the spinning wheel in the WMF Cromargan Creamer
The original orange screamer sound like a jet engine or f1 car this 4 rotor version sound more deep just like a rallycar
I grow vegetables in plant pots and needed a way to provide water without just dumping it on the top of the soil. There is a file for a cap that is also good for checking the fit. The Drain-sleeve helps with getting the water into the…
once i update my other 18" rotors, i will put them here. (edit: done) yes it was made and tested. printables mobile is just not working as of posting this. HARDWARE: 4x M3 by 10 screws 1x M3 eyebolt 1x Samsung 00029 microwave blower motor…
I enjoy a cup of coffee at work, but I prefer my creamer over what's available in the break room. I get a good deal on these creamers in bulk, and I needed a container to transport them in my backpack with a little more structure than a…
This is to loosen and remove the plastic caps on a half & half container. It is also the same size for pop bottle caps. It has teeth that grip the cap. The handle has 3 cavities which I used to put magnets in so that the tool could be put…
My wife likes to stock up on coffee creamer when it's on sale, which is good. Having half a dozen cartons in the fridge and not knowing which one is already open is bad. This little indicator clip solves the problem. Print as provided…
Ever tried to stack these non-dairy creamer jars? Here is the Non-Dairy Creamer Jar Stacker Ring to the rescue. Print instructions Category: Kitchen & Dining Summary Ever tried to stack these non-dairy creamer jars? Here is the Non-Dairy…
Specifically designed for "Nestle Coffee Mate Powdered Creamer" bottles. Vertical storage/organizer for 3 bottles. 77mm holes for a nice fit Print on it's back, holes facing up to minimize using supports. 10% gyroid infill 2 walls
I cannot open the coffee milk cups easily because the alu foil is difficult to grip, so i made a small helper. Category: Kitchen & Dining
using this, you can easily transfer stuff once bottle is empty. popcorn etc
https://www.amazon.com/Greartisan-600RPM-Torque-Reduction-Gearbox/dp/B07FVHPLCP/ref=asc_df_B07FVHPLCP?tag=bingshoppinga-20&linkCode=df0&hvadid=80126962059985&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=89611&hvtargid=pla-458372654…
😈 Halloween Krampus – Infernal Screamer Emerging from the depths of the abyss, the Infernal Screamer captures the very moment of demonic wrath. Every wrinkle, horn and fang is sculpted to perfection, bringing this terrifying legend to…
This is an experimental coffee creamer that I made in Fusion 360. I have no idea if it even prints, so do it at your own risk. You can improve the model freely.
SIRENEEENENENENEEEEN SCREAMMmm btw it uses an XD-3420 motor
If you blow in it makes a Sound. If you saw it in Thingyverse I am the Designer.
This is a remix of a sweetener and stir stick holder by 3DPrintM.D. I expanded the original holder to hold more types of sweetener and added a creamer box at the back to hold other types of items. I also expanded one of the sweetener…
Here's a 1/2 scale ACA Screamer S2 (or S3)! There's a top ring on the rotor to prevent the rotor from expanding outwards, so that might not be very realistic. Had to do it, though. Model needs a Samsung 29 motor (S3 is an 895), 5mm to 5mm…
Here's a 1/2 scale ACA Screamer S5! There's a top ring on the rotor to prevent the rotor from expanding outwards, so that might not be very realistic. Had to do it, though. Model needs a 997, 6.35mm to 6.35mm coupler, M4 screws, M3…
I designed these bottles because I wanted to hit two 32oz bottles of coffee creamer in an 8 can mini fridge. I designed these to print in vase mode and to use the original bottles' caps. I coated the insides with epoxy to make them food…
💀 The Screamer: Endless Agony 💀 A 3D-printed nightmare and the perfect centerpiece for Halloween. This bust captures the precise moment of pure, primal terror —and multiplies it. The horrifying facial echoes, featuring endless screaming…
Dissatisfied with standard plastic bird feeders, I decided to design my own. Coffee creamer bottles with larger spout dispense seeds more effectively. I also incorporated ramps to facilitate the slow release of seeds. The photos…
As requested by a Reddit user. Work in progress!
This is my first 3D build as it was not available from manufacture site. Thank you for your comments and suggestions to improve the build and learn.
A mount for the older Oxford Screamer disc lock. It might work with the newer models but not tested, designed for a 7mm locking pin with around 70~mm length on the jaw. The mount side is for a 14mm tube subframe or similar, using 7mm wide…
Recommend to use some reasonably strong filament, at least PETG. Print with minimum of 3 perimeters, 15% infill (grid type supports the load the best). Use no supports, the bridging is absolutely fine. As it is printed, the layer adhesion…
~1/3 scale Completely remastered this because I wasn't happy with V3. Contains a more accurate chopper and is made for a different motor. Made on Tinkercad: https://www.tinkercad.com/things/6L614OmHl5k-screamer-s-10-912-print-v4 PRINT ALL…
This is a ⅓ scale, fully functional ACA Screamer S10. The siren is mostly tested. I would recommend putting something under the motor cover to hold it up. The motor covers are not the most strong. NOTE: THIS MODEL IS STRICTLY FOR 3D…
Dissatisfied with standard plastic bird feeders, I decided to design my own. Coffee creamer bottles with larger spout dispense seeds more effectively. I also incorporated ramps to facilitate the slow release of seeds. The photos…
once i update my other 18" rotors, i will put them here. (edit: done) yes it was made and tested. printables mobile is just not working as of posting this. HARDWARE: 4x M3 by 10 screws 1x M3 eyebolt 1x Samsung 00029 microwave blower motor…
Here it is!! The new member to the 1/4 scale ACA lineup is the Screamer 105!! This project is very special to me since I got the privilege to actually see one in person be the first to take measurements and inside photos of it along with…
This is a fully functional ACA Screamer S-10 project. This model working with a DC 130 Motor. Parts you need DC 130 Motor Superglue or other adhesives A battery or a other power source How to build Its not difficult to build but there are…
~1/3 scale Made on Tinkercad: https://www.tinkercad.com/things/eunmgakBMZf-8-port-screamer-s-10-print-v1 PRINT ALL PARTS SEPARATE 8 Port rotor and stator made by me and are both are compatible with an XD-775 motor. Based off the Mondovi…
This is a ⅓ scale, fully functional ACA Screamer S10. The siren is mostly tested. I would recommend putting something under the motor cover to hold it up. The motor covers are not the most strong. NOTE: THIS MODEL IS STRICTLY FOR 3D…
This is a ⅓ scale, fully functional ACA Screamer S10. The siren is mostly tested. I would recommend putting something under the motor cover to hold it up. The motor covers are not the most strong. NOTE: THIS MODEL IS STRICTLY FOR 3D…
