Counting matching models…
Key features Supports the original bolts and screws! Just as stiff as original (when printed correctly) Twice as heavy as original Easy to print without supports Tested print settings that work 3 perimeters 30%+ gyroid infill 0.2mm layer…
Corner motor bumper for happymodel crux35. Print in TPU and zip tie on. I left a window for a 2nd zip tie but it deformed the TPU too much for me. Not sure if they help but added them since I busted motors on a different quad. Made from a…
This mount holds the Runcam Thumb Pro camera on the Happy Model Crux35. I'd recommend printing in TPU with the camera mount facing up with the large flat side down. Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No…
1-24-2025 UPDATE: I have uploaded a version 2 that only requires you print the file twice, no need for 3 pieces or supports. Weight of each piece comes in around 0.55g, so 1.1 grams for a mount that accommodates a fairly large range of…
Tough PLA is good PETG was bad And I recommend TPU
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
print it flat, no supports needed. Print 2 included versions: 35 degree hard mount 10-50 degree adjustable mount
NOTICE: This does not work with 3.5" props, only 3". The 3.5" props interfere with the canopy. I looked for quad frames that would fit, or be easily modified to fit the 03 Air Unit while achieving CRUX35 flight times, but those do not…
After the bottom plate of my Crux35 frame from my 3.5” FPV copter broke twice in a row and I no longer had a replacement, I designed a compatible frame for the 3D printer. The dimensions are designed so that the stiffness of the arms…
Mount for iFlight GP8 Category: 3D Printing
Fixed 20 Deg version. I will publish more fixed angle versions later. Print 2off flat using TPU no supports required. With rocksteady off some intermittent very slight vibration is present in the camera recording and feed. With rocksteady…
Parametric Box for the Happymodel Crux 3 1S Toothpick. Print from PLA or PETG. Screw length M3x30mm
This is a canopy based on the original for the Insta360 go. I'm sure it can be used for other micro drones (especially ones with the CrazybeeF4SX1280 ELRS FC). Printed with TPU. Make sure not do to layerhights over .2mm. I appreciate your…
Wallmount: PRint like ever you want Sideplate: Use TPU or something else flexible
Based on the STL files available from HappyModel https://www.happymodel.cn/index.php/2021/09/08/3d-printed-camera-holder-and-antenna-holder-for-crux35-crux35-hd/ Step files included for easy modification
This is a camera mount for the Runcam Thumb Pro Camera on a Happymodel Crux35. It protects the camera an provides a fixed camera angle of 25 degrees. Enjoy! Print Settings Printer: Self built Rafts: No Supports: Yes Resolution: 0,2mm…
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
oops i forgot to upload the .step, the length issue is still around tho its like .2mm to long or something. This needs to be cut out of carbon fiber, it serves no benefits if its just 3d printed.
Hehe should fit any random flag with a 5.3mm shaft
between v2 and v3, one is just shorter, and one prints at a offset angle. both seemed to work for me.
This base plate mod is an evolution of the exisiting crux35 frame, with a bit more structure added. The exisiting v1 crux35 frame has a couple notable weakspots that were prone to break in a crash. This model aims to fix those issues.…
Reworked the Happymodel STL to reduce vibrations. Print on the side for an easy print. One of the models have a built-in structure which helps in case your printer have poor bridging performances with TPU. Print Settings Printer: Custom…
Printed with 20% gyroid infill and 5 walls.
I've printed this in ABS with organic support and 0.2mm settings (with a 0.5mm nozzle). The STL is flipped so that the motor mounting pad is on the print bed. Similarly for the video shelf and battery tray. I tried to strike a balance…
A little piece to hold batteries on my drone with a rubber band. Also includes a version that allows mounting a GPS.
To give space between GPS antenna and FC/VTX I added this GPS mount to the original antenna mount.
25.4mm tiny whoop mounting pattern. Print in TPU. Mounting hole recess for socket head screw.
