Counting matching models…
So I did a thing!!! I have had Cadcat’s Barbasol Jurassic Park Cryco Can model for some time but never printed it because it’s, shall we say, not very screen accurate. I found on Amazon an actual Barbasol Stash box can and thought it’s…
This is a functional and screen-accurate Cryo Canister from the first Jurassic Park movie. Most of the credit goes to BadWolfProps which made the original files and coffeehedake which remixed the middle cylinders to be the right size from…
Arc Reactor – Cryo Series MK I & MK IV High-detail custom Elite Liquid pump covers designed as a true centerpiece for any PC build. I created this project with a simple goal in mind: to design something I would actually want in my own PC,…
I ran out of cardboard cryobox dividers, so I’ve made my own. Printing in vase mode saves time considerably. I printed it from PLA and although it is not super resistant to low temperatures, it works and haven’t cracked yet. I printed…
A replica of the movie prop that fits in a stash canister
I purchased this Barbasol can and used sand paper to remove the bottom lip so the inside parts would fit. For the vials I purchased these and used an hobby knife to cut off the cap. O-Ring Spring
I made this to support my new Cryogrip Glacier plate. I placed it on the right side so the nozzle wipe procedure won't cause the print head to bang into my Unifi G4 camera. Apparently, the right side is the way to go if you have a Core…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of the version with heatset insert M3 D5.0 L4.0 (Voron style). Don't forget to adjust your G-Code on the x axis by minus 35mm.
This is a STL model of the BIQU CryoGrip Pro Glacier buildplate for Snapmaker U1. I created it to customize the buildplate within my slicer software (Orca Slicer / Snapmaker Orca). You can change the texture such as color and logo…
I designed this fridge magnet for the current Fridge Magnets contest. The design is taken from the first episode of Futurama, showing Fry frozen in the cryo chamber, with instructions not to open it before New Years of the year 3000.…
Here is a model of the Cryolator from Fallout 4 - I fixed it with Netfabb and it should be printable right now. You will need much support - although you may flip it 180° and print it upside down. Have fun! Print instructions Category:…
You can add your own design to the cover using most slicers e.g. PrusaSlicer. Then, slice for multi-color however you like. PLA does not become too brittle at -80°C. My boxes printed in December 2024 are still holding up well, and I will…
Scientifically accurate model of a cryolophosaurus. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with…
To be used together with langjais purge bin or my remix of that one. Parts required: 1x 10mm m3 bolt 1x m3 square nut 1x bambu lab silicone nozzle wiper for A1 Push the square m3 nut all the way into the slot, then attach the wiper arm…
This is a remix of the soda can tank. Slightly opened up so that it slides on painted cans a little easier. Also a new platform for the top and removal of the ladder. Using this for scenery rather than a fight platform. Cryogenic labels…
You like Cold rather than HOT??? This keychain is for u V2 IS BETTER!!!
Are your Mr. Frosty™ cryopreservation racks always filled up in the -80 by inconsiderate labmates? Can't justify to your PI to fork over ~$150 for more of them? Consider the PhD alternative to Mr. Frosty™: the Dr. Frosty™! This is the…
Scientifically accurate model of a cryodrakon. The model features high-poly feather and skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with a…
1. (1:32) Note the marked two arrows in the element with the rubber bands and one arrow in the centre of the tube. They should face each other. 2. (2:02) When assembling the individual rings, pay attention to the cut-outs, they should fit…
Cryo Box Storage System (-20/-80 °C) A versatile storage system for biological samples, designed to fit standard -80 °C freezers. Inserts can be printed separately and slide into the box. standard 1.5–2 ml test tubes (e.g. Eppendorf…
Cryolophosaurus is sometimes known as Elvisaurus because of the distinctive crest or "pompadour" that adorns the top of its head. The crest is similar to the pompadour hairstyles of the 50s, most notably that of Elvis Presley. This sort…
A 3D printable cryostat for displaying quantum computer models at any event.
This is a vision from Genshin Impact. I can also create the other elements, and the other regions' outer casing if requested by users
Ripped straight from the fallout 4 game files. 42k triangles 128k vertices
30x large model of a grid for cryo electron microscopy. The model prints fine at 33.[3]% scale with 0.4 mm nozzle. For smaller scale need to use smaller nozzle sizes
Cryo gridbox with custom screw and a pin-type lid. Fits 4 FEI Autogrids (and bare grids as well, but they have some wiggle room), positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position…
Skull and jaw of Cryolophosaurus Ellioti. Sculpted in blender, it is composed of two parts, the skull and the jaw. The stl are already in the best printing position, just make sure to enable all supports. If you print it small some…
Created as a prop for a friend's Stargrave game, this is a remix of an originally solid prop, to make it more functional and interactive. The pod itself has now been rescaled, hollowed and split so that a figure/miniature can be placed…
Cryovial tube rack for the Opentrons OT-2. Designed and manufactured for the Sather Lab of Seattle Children's Research Institute. Tubes are at a 20deg angle to enable capillary action to draw the fluid out of the pipette tip to ensure all…
I've used the Wiper Path Generator of the V2 Wiper with this coordinates from my printer: X=41 Y=-15 Z=4.5 This is the G-Code I use: G1 X5 Y0 F10000 ; go to safe position G0 X5 Y-14 Z4.0 F10000; G0 X45 Y-19 Z4.0 F10000; G0 X5 Y-14 Z4.0…
Have a cookie AND a vision! This is Cryo from Genshin Impact. You can use the full cut cookie and remove the element so you have a cookie with an element-shaped hole. Or you use the imprinting cookie and fill the dents with some icing.…
Printed on Prusa Mini with Generic PLA settings. V1: original version V2: updated with more space between holes to allow for easier access to vials.
the cryolophosaurus had a nickname “elvisaurus” because of the crest on its head that looked like the hair of elvis presly
Hi everyone! I present to you my second ever print and first remix. Remixed of the Versirack (https://www.thingiverse.com/thing:4735609) designed by BoeseBande. The original is an interesting design but I felt that there was not enough…
This was made using in film reference, notes from crew, as well as detailed photos of the SDCC proton pack and the Olympia pack. Scaled from references based off of known objects on the pack taking into account perspective distortion and…
This is a simple rack for Sarstedt 1.8 mL screwtop cryovials (cat # 72.379.992), but may also be applicable to other products in the same product family. It is designed so that each well engages with the nubbins in the cryovial base to…
Board game inserts for the game Cryo , from Z-Man games. You get: One caverns insert Four player trays Two token trays Card holder You can print the player trays in the different faction colors to make it more thematic (as I did). The…
235x235mm version, printed in ABS. Can face either direction—your choice.
I often print on regular magnetic bed plates and also some piecies of garolite g10. To install g10, i needed to always unscrew the two guiding bolts to put it, then screw them back when i needed to use magnetic bed plate again. Now i…
Just learning how to model stuff. This is a fairly accurate model of my STI Stirling engine Cryocooler. The dimensions on here should be pretty spot on, I used my cryocooler as the source of truth for all measurements. Note : Im not 100%…
Im using it to use for orcaslicer's in engine render view. I've got a centauri carbon and when i switch to a different plate, i like to have it visually match what i see in orca slicer.
Cryo gridbox with custom screw and a pin-type lid. Fits 4 bare TEM grids, positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position directly on the platform with no pad or supports. Lids are…
Ripped straight from the Fallout 76 game files. 4k triangles 12k vertices
Hello Tribe, Some simple cryo pods for your wargaming needs, great for Beacon of Doom.
Ever tried grabbing your BIQU CryoGrip Glacier Pro plate right after a print and immediately questioned your life choices? Yeah—same. This is a simple, sturdy handle designed specifically for the 235×235 BIQU CryoGrip Glacier Pro build…
This is a simple rack for Nalgene 1.2 mL screwtop cryovials (cat # 5000-0012), but may also be applicable to other products in the same product family. It is designed so that each well engages with the nubbins in the cryovial base to…
Species of hadrosaur from Utah.
Remixed the model by JustPrint. I added a 0.5mm inset honeycomb design to add grip.
Cryobox inlet for 140x 0.5 mL tubes. For box 136 x 136 x 32 mm. Fits the tubes from VWR: 20170-293, called 0.65 mL tubes. Cryobox that I used, if from Ratiolab: 5141321. Print with 0.4 mm nozzle using your favorite material. Set…
Added some panel lines and details, these have been exaggerated so details are more visible when printed at tabletop scales. Edit: after printing at 45mm, they still look large on the board, I would print them 30-35mm next time. See photo…
Print 1 of each, should fill the entire box and have room for everything stacked as shown ( with the rules on top, ( theres a really light dent for them to sit flush with the bottom left ) Fits everything to the lip so it should be good…
Hello Tribe. I have a deep love for Scifi so I made a set of tanks for your terrian set for wargaming or ttrpg Please enjoy https://thangs.com/The-Free-Heathen-Workshop/group\_0\_16768282-25165 Cheer Maker Millwright Category: Model…
I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer go to printers tab General section Bed shape click set load xl.svg (comes from the prusa-slicer project and…
Original design of a standard SEM cryo grid holder. Holds seven pieces. Tested printed in PLA, 100% infill, 0.2mm nozzle. Should work with SLA as well. Category: Physics & Astronomy
Holder for 6 cryotubes. For vials with 12.5 mm diameter. Print with PETG for ethanol and chemical resistance.
Hexagonal rack for putting cryovials into a water bath. Includes an M10 thread for attaching accessories to the centre. Print with holes on the bottom for a quick support-free print. The rack has an angled bottom for better stability, and…
I remixed this to accept 1/4 NPT fittings and increased the hole size for the original power cable (you will have to unpin the wires from the connector and then repin them after putting them through the hole). Do note YOU MUST TAP THE…
In the Jakobi Lab, we use square metal containers for storage of the round plastic ‘grid boxes’. To transport these metal containers in a dry shipper, we 3D-printed this holder. It is made from thin plastic lamella, which in our…
A handle to open Nunc Cryobank Vials, replacing the original one. Snaps into the cap just like the original, so it can be used to extract vials as well as to open them. The nubs in the driver will get worn out over time resulting in a…
This was made using in film reference, notes from crew, as well as detailed photos of the SDCC proton pack and the Olympia pack. Scaled from references based off of known objects on the pack taking into account perspective distortion,…
Sometimes its hard to handle a -80 box while grabbing the tubes you need from them. You can wear this brass knuckle tube holder while in the -80 and snap the tubes you need onto the clips. This helps you not misplace your tubes where they…
Look, we've all been there. Your soda or beer is just a shade above scalding. Something needs to be done. To make matters worse, five of your friends are over to watch Adam Sandler's newest hit and they are looking to you for leadership…
Signe tube holder, for cryogenic vials 1.8mL with a 12.5 mm diameter. Print using PETG for resistance to to ethanol and chemicals.
1x4 Gridfinity Holder for Kershaw Cryo Knife. Shadow box with an angle to store and retrieve. Category: Tool Holders & Boxes
The Positional Cooling Platform Device (PCPD, known as the ‘CryoKit’) is a 3-D printable device that supports reproducible cryopreservation with standard cooling rates (5 to 35°C/min). The CryoKit accommodates French straws (0.25 and…
FalconTamer - CryoDewar Sample Organizer A modular 3D-printed system designed to organize bundles of Falcon tube ropes or cables emerging from a cryogenic dewar. Helps prevent tangling and enables clean routing of cables during sample…
Remix of model to fit A1 Mini CryoGrip plate on Prusa Mini.
Cryo Crystal Exoskeleton Arm The story In 2026, the National Association of Intergalactic Makers (N.A.I.M.) attended the annual PrUsA UnIvErSaL maker fair on the distant planet Shotz . While there, delegates encountered an unusual…
A stand for the coldhead of an Oxford Cryosystems Cryostream 800 cryostat. I'm guessing the head was designed to be serviced upside-down (edit: confirmed by manufacturer, they have a very similar stand). I used it several times now and it…
Is your soda or beer too warm? Do you want a completely over the top way of cooling it down in a hurry? Meet the Cryo-Can! This little baby solves all your beverage can cooling needs. Start by pushing a standard beverage can all the way…
I tried this a few years ago and just could never get a manifold object to come out. I tried again this week and I guess I've learned something. I wanted to make a hollow or broken cryo chamber that might be discovered post horrible space…
This project is a collaboration between The Ohio State University and Oak Ridge National Laboratory. The goal of this project was to create a cryo-transfer station which could fit a side-entry holder for a Nion STEM. The design is modular…
Es un copo de nievo con una clara inspiracion en en la clase cryo del Ghenshin impact
These inserts provide a simple color-coding system for cryogenic samples stored in LN₂ . They are designed to press into the top recess of the cap on the following cryovials: Thermo Scientific Nunc™ Biobanking and Cell Culture Cryogenic…
96 well stand cryotubes 2ml with gripper on the bottom
Stand for cryo vials ~5mm diameter with 6 bottom slots. Holds bottom so you can screw them with one hand.
Heatbed Tray and Nozzle Wiper for Cryogrip There are many different trays for the print chamber, and I’ve even designed a few myself. Since I now want to use the Cryogrip Pro Glacier build plate, I can no longer use my old mount. That’s…
A clean, unlettered 1970s cryogenic tank car featuring a smooth white double-walled body and separate bogies. Inspired by real-world LNG and hydrogen transport, this model captures the narrow, upright profile of vintage freight wagons.…
The Positional Cooling Platform Device (PCPD, known as the ‘CryoKit’) is a 3-D printable device that supports reproducible cryopreservation with standard cooling rates (5 to 35°C/min). The CryoKit accommodates a variety of cooling…
The Positional Cooling Platform Device (PCPD, known as the ‘CryoKit’) is a 3-D printable device that supports reproducible cryopreservation with standardizable temperatures and cooling curves. The CryoKit accommodates French straws (0.25…
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
This insulating holder is useful for flash freezing small samples without using too much liquid nitrogen. Ensure you use borosilicate glassware to prevent cracking. You may need to adjust the hole size, as not all beakers are the same and…
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC) by Brittany Ratliff, this specialized model is designed to securely fasten thermocouples to Corning 2 mL cryovials, enabling precise and consistent temperature…
Modèle 3D d’une cuve cryogénique conçu pour le stockage et la manipulation de fluides à très basse température (type azote liquide). Ce fichier au format STL est optimisé pour l’impression 3D et convient à des projets de modélisation…
Device: AGGRC Strand Centi-Sizer v4.0.1 (Parametric Uniform 1-cm Cut) part of the Strand Cryopreservation Shuttle System (SCSS) Description: Prior to open-hardware device development, Aplysia egg masses were dissected into strands by use…
This open hardware package was designed to facilitate cryopreservation using pharmaceutical hard capsules, which can be made of gelatin or plant-based materials, as containers. These capsules have been used in the cryopreservation of…
What is this? These are customisable cryotube inserts that fit nunc and other standard cryotubes tops. You can colour them to your hearts content and make it easier to find your tubes in the deep freeze. They're printed on a 10x10 grid to…
I printed this using Amolen Glitter PLA.
These are some feet that are meant to replace the default springs on the ender 3v2 so that the cryo grip fits under it.
This model is based on Herose anti-icing shield originally made from steel and aluminium "Type 50155 - Anti-icing shield for Cryogenic-Globe Valves with 2 yoke rods". Simple holder is included as one part. For mounting are required: 2x…
53mm by 2.5mm O-ring that fits perfectly around the base of the Cryotube Can Remix model. Glue on is optional as it should fit pretty snug.
A very sturdy water cooling jacket for the Hybrid 98 cryocooler which requires no paste or epoxy to be sealed. Hardware required: M2.5 screws M2.5 inserts O-rings/gaskets (will update with the exact size later) silicone grease TWDLG-S…
This is a coupler used for mounting the STI cryocooler onto a dewar while providing a port for gas input to be condensed, as well as a thermocouple.
Caps for screw cap cryotubes to allow to write on top of the tubes. Printed in PLA and PLA+ and they are working pretty well at -80 °C, holding shape and ink. Compatible with Fisherbrand tubes. Ideally with Sarsted ones as well but it was…
I made this to support my new Cryogrip Glacier plate. I placed it on the right side so the nozzle wipe procedure won't cause the print head to bang into my Unifi G4 camera. Apparently, the right side is the way to go if you have a Core…
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
Es un copo de nievo con una clara inspiracion en en la clase cryo del Ghenshin impact
Ever tried grabbing your BIQU CryoGrip Glacier Pro plate right after a print and immediately questioned your life choices? Yeah—same. This is a simple, sturdy handle designed specifically for the 235×235 BIQU CryoGrip Glacier Pro build…
