Counting matching models…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
These are upgraded faces for the VRS DirectForce Pro sim racing pedals, based on the real-world racing Tilton pedals. These have been designed to fit on top of the original VRS face plates and to replace or use the original mounting screw…
Compact Flash card holder for Libretto 50CT / 70CT. Intended for use with standard CF/IDE adapter. No screws needed, just seat CF/IDE adapter (+ CF card) and gently push holder inside. Some wiggle may be required :) Do not apply too much…
A MTG deck box for up to 140 single-sleeved cards with perfect fit. Fits Magic: The Gathering (MTG) and similar sized cards perfectly if single-sleeved. There are two versions : For KMC Perfect Hard sleeves ("Open Sesame") or no sleeves…
UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…
Hope this model will be helpful. If you liked it please hit the [🧡 Like] button. I was looking for a CompactFlash (CF) memory card model as a reference for a new design that I'm working on, but I couldn't find any. So I designed it from…
Be careful when pressing the M3 nuts into the base plate to prevent it from cracking. Softening the stubs with a heat gun helps. Connections: Pins 1 + 2: E-Stop (NC – opens when pressed to stop the FFB) Pins 3 + 4: Power (NC – opens to…
Could not open original project file due to error message: > Error (not well-formed (invalid token)) while parsing ‘3D/3dmodel.model’ at line 4
using this fan bracket: https://www.thingiverse.com/thing:2850837
Here is my custom selectfire protean thumbhole stock. i tried my best to make the battery compartment as large as the original. ONLY COMPATIBLE WITH THE SELECTFIRE REMIX! HW needed: -4-6 m3x5x4 heatset inserts -2-4M3x8 Screws -2 M3x12…
Print at: 0.2 mm layers 4 layers top and bottom 3 perimeters 15% infill Assemble with M3 x 20 mm machine screws. Use a piece of 1.75 mm TPU filament for the lid gasket if you wish. cut to fit and clue the ends with CA glue.
CTF-1X Cataphract for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • ctf-1x4.stl…
CTF-IM Cataphract Ilya Muromets for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files…
A 10 pcs CompactFlash memory card holder. Easy peacy, lemon squezy!
Obudowa na przejściówkę compactflash do IDE 44 pin. Bardzo przydatne przy budowie retro komputerka ze starych terminali. Posiada dwa otwory pod śruby do montażu na obudowie.
P4 CTF team logo. Printed with 0.4 nozzle, enabled ironing, used phosphorescent PLA for glow-in-the-dark effect.
Ultra-Slim CF + SD Card Case – 6× CompactFlash / 4× SD A slim protective storage case designed to hold: 6 CompactFlash cards 4 full-size SD cards Each card has its own separated slot. The central finger cut-outs make the CF cards easy to…
Simple CompactFlash Card Holder. Holds 6 cards. no supports needed :P Used PLA with 0.2mm layer height when printing on my Anycubic i3 mega s
This is a compact flash panel for Roland VS-840EX, to replace the original ZIP drive. Print Settings Printer brand: Alfawise Printer: Alfawise U30 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.4mm Infill: 20% Filament…
using this fan bracket: https://www.thingiverse.com/thing:2850837
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
This is not a single model but a collection of my designs preset in OrcaSlicer (set for X1C but can be changed). I will update this ‘model’ as I upload further of my designs and/or revisit my older ones.
This is not a single model but a collection of my designs preset in OrcaSlicer (set for X1C but can be changed). I will update this ‘model’ as I upload further of my designs and/or revisit my older ones.
