Counting matching models…
Anka is a mostly 3d printed 1/10 RC Short Course Truck which is inspired and remixed from the excellent Tarmo4 project. (You may reach the Tarmo4 project's details from here .) If you are a terrible driver like me, this hobby might become…
Easy to print in place. Will fit on a 180mm X 180mm build plate.
Note, I posted this on Thingiverse as a remix here: https://www.thingiverse.com/thing:5438660 but had a problem associating it with my list of account models there so I moved it to Printables. -- Remixed only from the OBJ files posted by…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Note: this was tested using a 6mm thick bed with a Keenovo 750w heater. With the stock bed/heater you may see less effective results. You can use 1 or 2 sides to help with chamber heating. Uses 5015 24V blower fans. Can be connected to…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
My first collapsible sword and I hope you like it, no fancy settings needed to print this but made sure your printer is dialled in for the blade. Printed with .4 nozzle / .2 layer height & default 2 walls. 15% infill should be plenty.…
UPDATE:I DECIDED TO CUT THI MODEL UP INTO PIECES SINCE IT PRINTS SO MUCH FASTER AND CONSERVES ALOT OF MATERIAL. BUT ALSO GIVES SOME EXTA ROOM FOR MORE CUSTOMIZATION. OPEN THIS AS A PROJECT!!!! THIS HOOD WAS REMIXED AND FINISHED BY MY GOOD…
Easy to print in place benchy dragon supports are needed under upper jaw and chin - a brim with a .29 offset may be useful
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
The beta version of HP Reverb G2 prescription lens adaptor. I'm opening up the models for users to try out the three thicknesses. You'd need to order a pair of glasses from Zenni. Make sure the IPD is set to 65mm even if your IPD is…
This mod uses the holes for the front arm wipers to attach the ducts that blow air directly onto your heater. In just 10 minutes the chamber is able to go from room temp, to ~50C. To get to 60C it takes 15+ minutes. I am using 10mm thick…
Boom: 3 - 5010 Fan 1 - 4010 Fan 3 - M3x8 SHCS ( Mount Bracket to M8P) 15 - M3x16 SHCS or ISO 7380 (Fan) 15 - M3x4 OD 5 Heat Inserts (Fan) 3- M2.5x10mm SCHS (CB2) Note: updated model to correct some errors on the fixing holes
UNIQUE INTAKE DESIGN FOR 4015 TURBO HOT END FAN. ONLY FOR THOSE THAT HAVE REVERSED THEIR HEAT BLOCK OR USING A DIFFERENT CONFIG.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
I designed this spool to fit a 75mm D3D Sigma filament refill using minimal filament to make. The slots in the outer spool make it easy to load the filament before cutting its zip ties. The SCAD files are included to provide a starting…
Hexagonal patterned dice tray for the Contemporary Dice Tower by RAD3D! Walls are a bit fragile so try to avoid squeezing or twisting them. I uploaded a version with 3mm thick walls so it will be stronger. Also a new design with single…
Plaground3d 's Flex Dragon design is well done, easy to print from any material, looks neat, flexes just as expected, and seems robust. Two modified versions, one where a 6mm diam magnet is put in place after printing, to be held in place…
This models test showed cooling improvements with the CHCB-OT hotend but I have not tested it with the other hotends. Best way i have found to print it is face down. Recommend printing in ABS or better.
Request from a friend. I printed in Dremel Red PLA 215/60c no raft, no support. 50% infill for stability, do not use more than 2 walls... 3 walls or more will cause hollow points in the teeth. Category: Bathroom
This base fits the leaning tower of Pisa created by @MiniWorld3D found here: https://www.printables.com/model/261584-leaning-tower-of-pisa-italy
Light gray base done for the Articulated Sea Turtle designed by JD3D at the following adress https://www.printables.com/fr/model/748459-articulated-sea-turtle-singlecolor-and-multicolor. The base permit to raise up the turtle head. The…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Christmas Penguin Ornament in Santa hat. Bring some winter magic to your decorations! This adorable chibi-style Christmas penguin is designed to print cleanly, stand on its own, and hang perfectly as an ornament using the reinforced loop…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
⚙ MiniWorld3D 's Maker Coin is here! Test your printer setting, try new filament samples, or setup your MMU with this simple model of our own design. We modeled it from scratch to come up with something unique while clearly still fitting…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Connecting locks Individual streets are interconnected by connectors, which act like locks. In certain instances, such as with small roundabouts, it is advisable to utilize a connecting street without a locking pin. Connecting streets are…
Easy to print. No supports needed. Depending on your print bed adhesion a brim may be used. Will fit on a 180mm X 180mm build plate.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Holds Beacon3d's RevH eddy current surface scanner ~2.5mm above the plate. DOESN'T WORK WITH GLASS BEDS.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Easy to print in place vase, does not print in vase mode. I printed with a .6 nozzle at .28 layer height. If you would like to sell prints of this model please join my club.
PD3D - Food Tin Lid I made myself a promise that the first thing I would print was tin lids for food storage , perfect for dog food, baked beans, or anything else in the fridge . And yes, in the UK, our baked beans come in tins! ✅ Design…
This is a mount to put a BLTouch on Joel Nicklasson's newest version of his Sidewinder BMG conversion kit. I found it was going to be difficult to print if I add the BLTouch mount to Joel's new BMG version, so I decided to just make a…
https://www.thingiverse.com/thing:3346069 Category: 3D Printer Parts
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
MagSafe VESA Mount 100x100 V2 (By KD3D Labs) If its to tight for you scale the model by 0.1mm or abit more. But not to much els the VESA mount holes wont fit anymore! This version wil pressure fit the MagSafe charger. Also is there a…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Airpods 4 Multiboard Snap-On Holder
Loved the original design and just wanted to make it pop a bit more. Added ability to make with 3 colors, and included definition of eyes to make them stand out. Color changes were made this way to minimize the amount of waste from…
Celebrating TEN YEARS of @MiniWorld3D! Since 2014, designers & 3D artists have contributed to the MiniWorld3D catalog of easy-to-print yet detailed printable miniatures of landmarks of the world. Among the many ways that we are…
Profile created for Orcaslicer 2.4.2 based on Creality Ender3 and validated on real 3D Printer Kywoo Tycoon Slim. I know there is a lot to improve, please let me know your improvements so I can share it in here.
Very easy to print. I use a .6 nozzle and print at .18 layer height
Needed to replace the back of my Triton 1" Dial indicator. designed this. Printed with 3DSolutech Silver Metal PLA Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: .3 Infill: 25%…
Celebrating TEN YEARS of MiniWorld3D! Since 2014, designers & 3D artists have contributed to the MiniWorld3D catalog of easy-to-print yet detailed printable miniatures of landmarks of the world. Among the many ways that we are…
The RedBeard3D flagship mount: engineered for pro cooling and a clean aesthetic. Optimized for the Bambu P1S . Print Specs: Optimized for PLA with 3 walls for maximum structural rigidity. Pro Cooling: Open-frame design allows unhindered…
Celebrating TEN YEARS of MiniWorld3D! Since 2014, designers & 3D artists have contributed to the MiniWorld3D catalog of easy-to-print yet detailed printable miniatures of landmarks of the world. Among the many ways that we are…
The models on this page are just a few examples of what you can make with MyCard3D. Design your own - it takes minutes. A free online designer. No CAD, no account, nothing leaves your browser. MyCard3D is a web design tool for…
I designed this hex tile mural/puzzle to be community printed for Dayton 3D Printing Society (D3DPS) at the 2019 Make It Dayton Festival ( http://www.makeitdayton.org/ ). I used 3DMakerNoob's hex tile tutorial video to cut the tiles, and…
I wanted to have an overhead camera so I designed this to replace the glass lid holder on the D3D riser with a camera mount. BOM: 3 x M3x4x5 heated inserts (optional) 3 x 19x19mm cable tie mounts 3.5mm diameter hole 3 x cable ties 3 x M3…
Hi folks , i saw on the internet ,they sell for 10 euro these sliders . in bad 3d print and ect. i had furniture sliders found for 1 euro in the cheap shop. 25mm round and 6mm high. so i made my own , it cost in total 2 euro, design time…
I made this ,for my new design watercooling 3d printer . because i found only bad solutions with bad sices, i needed the exact sices . Print instructions Category: 3D Printing Summary I made this ,for my new design watercooling 3d printer…
Own design , inspiration from the teigblume tm5 / tm31. This is for the kitchen machine thermomix TM5 and TM31. Update for the TM31, you can shrink it 10% then it fits perfect. i will update later with an separate file for TM31 , It helps…
Easy to print similar to the dragon. It can scale down to 180mm X 180mm print plate.
Easy to print in place Curved Horn dragon. Mini version prints on 180mm x 180mm
Easy to print in place articulated Ant/Bug scalable to fit 180mm X 180mm print bed, no supports or brim needed.
Easy to print in place dragon. I have scaled it down to 60% without issue. I normally print with a .6 nozzle at .18mm layer height. The wings are loose fit, if you wish them a bit tighter scale them up slightly.
Easy to print in place no brim or supports needed.
Easy to print in place dragon with wings. Supports are needed on the wings, I normally use tree organic supports. Depending on your bed adhesion a brim may be needed. I print with a .6 nozzle at .18 layer height. 2 walls. 15% infill.
Easy to print in place dragon. End tail link has spinning disc. Prints with 2 walls and 15% infill.
Easy to print in place no supports are needed.
This is a Mod of JDD3D model to support linear rails for Z. The update makes 3 changes: Clearance for Geared Z Holes for zip tie of wires on the back of the Rook. exit path for internal hole down length of Z. I am using this as a way to…
Looking for something unique to give this Valentine’s Day? Skip the chocolate and print something that lasts almost forever! The Highland Heart Statue is now live for all club members. It’s cute, it’s fuzzy, and it’s leaning against a…
Easy to print with minimal support. Nice bear with a carved wooden look on a base holding a Valentine's heart.
Easy to print T-Rex inspired Dino holding a Valentine heart. It uses minimal supports. I like to use organic tree supports. It is available in the monthly and all files tiers.
Easy to print Dragon holding a heart. Supports are needed - I normally use auto supports.
I am incredibly excited to share the newest addition to the Shakaworld3D lineup. Check out the latest release: The Articulated Fixed wing Dino Skeleton Dragon. As you can see from the test prints, this intricate, skeletal design looks…
Hey everyone! I am incredibly excited to share the newest addition to the Shakaworld3D lineup. Check out the latest release: The Articulated Short Dino Skeleton Dragon. As you can see from the test prints, this intricate, skeletal design…
Easy to print single or multi-color dragon
I really liked rnvk's simplistic beard comb bud had no attachment to the NVK logo. Remixed it to have something i could related to more. added a platform to showcase the logo and created a hollow and standard logo version, enjoy.…
This is the first tablet holder for the kitchen cabinet-door i designed . In the slots you need 2 hex screws 3mm ,you slide the Holder, on and off easy, i printed one , but my girl friend didn't wanted ,with screws. i use it now in the…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print - I normally print these with a .6 nozzle .18 layer height should not need support but a brim can be used depending on your print bed adhesion. There is a smaller version stl with 220x220 in the title I have printed it on a…
Easy to print should not require supports, may need a brim depending on your bed adhesion.
Easy print may require a brim depending on your printer
Easy to print may require a brim depending on your print bed
For the challenge print it as fast as you can without using supports and brim. For a better quality model use manual supports and brim depending on you printers capabilities. Thank you for taking the time to view this design, I hope you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print dragon may need a brim depending on your printer bed adhesion - two versions of file with one that will fit on a mini build plate 180x180 Thank you for taking the time to view this design, I hope you like it. Please consider…
Articulated Fish Killer Dragon print in place very flexible. Easy to print model in the sea creature/dragon series. - depending on your bed adhesion may need a brim and support the flippers in the bottom ring section. The purple/gold was…
![BTT Manta M8P Cooling D3D Design Logo For Creality K1/K1Max [UPDATED]](https://media.printables.com/media/prints/983757/images/7498502_8aba1a39-bb31-4bfa-adf8-86c68ffc02d5_215e0775-ab44-4494-8388-81947f8b62d9/btt-manta-m8p-fan-mount-v16.png)
