P
PrintablesTimur Kasumov
50mm DN50 D50 pipe cap/stub/stop
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
- Downloads
- 540
- Likes
- 21
- Rating
- 5
Search results: d50
Counting matching models…
P
PrintablesFrantišek Celler
Reduction D50 to Hose 32/40
Pipe reduction D 50 mm on the vacuum cleaner hose 32/40. I print the thread without supports, after a slight cleaning works well. It is possible to try with supports. PET-G Nozzle - 0.4 Layer - 0.3 Fill 15%
- Downloads
- 527
- Likes
- 169
- Rating
- 5
P
Printableseisenfliege
Shelly Wall Switch Adapter for Jung CD500 with compatible frames
This is an adapter for combining the Shelly Wall Switches e.g.: https://amzn.to/3XbSPc6 https://amzn.to/4e7JSXF https://amzn.to/458Ltsc with or without https://amzn.to/4aP6PMe https://amzn.to/456prWQ with the Jung CD500 System such as…
- Downloads
- 198
- Likes
- 12
- Rating
- 3
P
Printablesvermontsfinest
OPTOMA UHD50 Projector Ceiling Mount
Ceiling mount for the OPTOMA UHD50 Projector. Projector bolt positions are taken from the mounting section of the owner's manual and line up perfectly on mine. I printed the top and bottom pieces out of PLA at 50% infill, the gimble piece…
- Downloads
- 195
- Likes
- 14
- Rating
- 0
P
PrintablesStarfleet42
Hytera BD502i 2-way radio knob guard
A simple friction fit guard to help prevent accidental volume/channel changes during light everyday use. Cutouts on either side provide enough room to make small adjustments to volume and channel knobs without needing to remove the guard.…
- Downloads
- 170
- Likes
- 10
- Rating
- 5
P
PrintablesTheInternets
Van Rysel D100 and D500 Smart trainer rocker feet
Rocker feet for Van Rysel D500 Smart Trainer (V2)
- Downloads
- 156
- Likes
- 7
- Rating
- 0
P
Printablespaul020559
Nikon D500 Full Cage
Nikon D500 Full Cage Required for cage: 4 x M3 screws 1 x ¼” Screw(for camera) Required for rig accessories: ¼” UNC nuts (up to 9) Required for the handle: 4 x M6 nuts 2 x M6 15 mm threaded rod -OR- 2 x M6 nuts 2 x M6 10 mm bolts Other:…
- Downloads
- 124
- Likes
- 17
- Rating
- 0
P
PrintablesThattCatto
DELL RT7D50 Keyboard Replacement Legs
Replacement legs for the DELL RT7D50 keyboard however it can't be used on most other revisions due to a slightly differing design.
- Downloads
- 120
- Likes
- 5
- Rating
- 5
P
Printablesenergeticinterpretation44
Fixed Jung CD500 frames for Shelly Wall Switch. Incl. 4 segment frame.
Original: https://www.printables.com/model/824217-shelly-wall-switch-adapter-for-jung-cd500-with-com The original multi segment frames did not quite fit. While the 2 segment version was just a little tight, the 3 segment version did not…
- Downloads
- 102
- Likes
- 9
- Rating
- 0
P
PrintablesJangy
Velbon D450, D500 Tripod Quick Release mount
Velbon D450, D500 Tripod Quick Release mount. Base is 48 x 58mm. Print Settings Printer: Tronxy D01 Rafts: No **Supports:** Yes Resolution: 200 **Infill:** 20% Triangle Filament: ESUN PLA + Blue How I Designed This ===================…
- Downloads
- 99
- Likes
- 4
- Rating
- 0
P
PrintableseddRX
Festool D50 corrugated pipe end piece
This replacement part is part of the Festool rotating adapter for D50 corrugated pipes (452896 if I'm not wrong). It threads on the end of the D50 pipe, which allows it to secure the rest of the rotating adapter. It seems this piece is…
- Downloads
- 98
- Likes
- 18
- Rating
- 0
P
Printablesbasti535
Adapter für Belimo SM230 Kugelhahn Praher D50 S6
Mit dieser Welle kann der Belimo SM230 am Praher S6 Kugelhahn angeschlossen werden. Druckbar ohne support. Die Steuerung erfolgt über ein Shelly 2PM Das Bild ist ein Versuchsaufbau passender Halter:…
- Downloads
- 82
- Likes
- 3
- Rating
- 0
P
PrintablesRuvim Kub
Disc Sander Duo. D50mm, D75mm
Disc Sander Duo. D50mm, D75mm Mini grinder with two disks, 50 and 75mm. It was created for machining and sanding parts printed on a 3D printer. This is the best tool for sanding ABS plastic, sharpening knives, polishing metal and even…
- Downloads
- 79
- Likes
- 32
- Rating
- 0
P
Printablessalfter
Low-Profile HD50/SCSI Slot Cover
I have a PCI SCSI card I need to install in one of my computers to read out the contents of a hard drive previously used with an Apple IIGS, but the motherboard I installed earlier this year has no PCI slots. I bought this…
- Downloads
- 73
- Likes
- 2
- Rating
- 5
P
PrintablesVanDerPol
Hose clamp HD50 pipe / Schlauchklemme HD50 Rohr
Simple hose clamp for suction with flexible hoses on HD50 pipes. An M6 nut and an M6 screw are also required. Einfache Schlauchklemme für die Absaugung mit flexiblen Schläuche auf HD50 Rohre. Benötigt wird noch eine M6 Mutter und eine M6…
- Downloads
- 68
- Likes
- 19
- Rating
- 0
P
PrintablesManuelM
CR10 Spool Adapter - Inner spool diameter D50 mm (Grilon3)
I made this model from scratch, but this is a remix from another model for an Esun spool adapter, but I do not remember from where I got it. I just added a nut for a sturdy fit. Easy and fast to print with PLA or PETG, 15% infill and 0,2…
- Downloads
- 62
- Likes
- 4
- Rating
- 5
P
Printablesbasti535
Halter für Belimo SM230 passend zu Adapter Belimo SM230 Kugelhahn Praher D50 S6
Zur Montage werden noch folgende Sachen benötigt 2 M6 schrauben ca 35mm, 2 Muttern M6 2 Schrauben ca D3 (zur Fixierung des originalem Halters) Stück Fahrradschlauch, ca 150x30mm (Rutschhemmer zwischen Rohr und Halter) jedes Teil 1 Mal…
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
Printablesmgetz
Nikon D50 Viewfinder Cover
Designed to fit the D50, but it probably fits other cameras. It's a tiny print, let me know what other cameras it fits!
- Downloads
- 50
- Likes
- 9
- Rating
- 5
P
Printablesbloodpack
Sophos RED50 19" Rack Ears
Print Settings Printer: Voron 2.4 Rafts: No Supports: No Resolution: 0.2 - 0.3 Infill: 40% Filament: ABS
- Downloads
- 49
- Likes
- 8
- Rating
- 0
P
PrintablesBike Cyclist
NATO/Picatinny Rail for Nikon ED50 Spotting Scope
NATO/Picatinny Rail for Nikon ED50 Spotting Scope Use this to mount a red dot sight (reflex sight, finder) or target scope to your spotting scope. Includes FreeCAD source file in case you'd like to modify the part. Requires 2 pcs M4 x 20…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesCh'marr
SMD5050 LED mount/light-pipe
This is a simple mount and light-pipe for SMD5050 LEDs, such as the WS2812/WS2812B LEDs. These work best with these tiny, single-LED circuit boards that let you solder strings of LEDs together in whatever fashion you need. The mount has a…
- Downloads
- 42
- Likes
- 9
- Rating
- 0
P
PrintablesZajda
Rancilio MD50 grinder to fresh / filtered coffee conversion
Hi here is my very easy and simple conversion of oldstyle italian espresso grinder machine into doserless fresh grinder that is possible to use for alternative methods (aeropress, V60, Batch Brew,…) or you can still use it as a espresso…
- Downloads
- 41
- Likes
- 1
- Rating
- 0
P
PrintablesFrantišek Celler
Reduction of Rd 55 to D50
The adapter enables the detachable connection of the flexible hose to the pipe distribution. Left hand thread. PLA Nozzle - 0.4 Layer - 0.2 Fill 15%
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
PrintablesPallasz
Daewoo D500S and Balter food dehydrator modular walls for filament drying
I recently bought my first spool of TPU (Creality brand) and it was extremely moist, right out of the box - its specs say that it can be printed at 210 - 240C and it was literally sizzling at 230C. I found a barely used Daewoo D500S food…
- Downloads
- 36
- Likes
- 3
- Rating
- 5
P
PrintablesArtemi
Ventilation Grill D50mm
Small ventilation grill for tubes with outer diameter 50mm and inner diameter 46mm. The connecting part has a cone for better installation
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
Printables4Crawler
Body Mount Bushings and Body Lift Information for Mitsubishi Montero/Pajero and MityMax/D50
The Mitsubishi Montero and Pajero models use 8-12 2-piece body mounts. Some later models may use 1 or 2 pair of 1-piece body mounts, not covered here. In that case, you can generally retain the original 1-piece bushings and replace the…
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
Printablesp2baron
Muse MU-D50W T-amp Case
Simple case for a Muse MU-D50w digital amplifier. I think this is the same module as the Muse M50. (not sure) Quck and dirty design in OpenSCAD. (file provided) Volume knob created with the (excellent) "Parametric Potentiometer Knob…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesEverettW
Corsair D5000 Headset Mount
Headset mount that seamlessly hooks into the top of the Corsair D5000. Designed Specifically for the Steelseries Arctis Nova Pro, but I imagine this would work with many headsets. I was able to print this with minimal support by adjusting…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesLaura
Rohrschelle für HT d50 h135 Standfuss100x50
Rohrschelle für HT Rohr d50. Die Rohrschelle steht auf dem Boden auf und besitzt Bohrungen um diese zu Verankern.
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp M3
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 25
- Likes
- 6
- Rating
- 0
P
PrintablesKr0pi
Rancilio MD50 doserless conversion
If you want to go this route, prepare angle grinder :) So far there are 2 main components: - Funnel which I use with printed TPU bellows. This is press fit and should be fine for the angle of legs - Legs and spacer to support the grinder…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
Printablesimnotthenut
support bouteille de gaz D50
Support pour bouteille de gaz, pour impression 3D Support réalisé pour mon atelier, destiné au stockage de bouteilles d’argon
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesBenne77889
HT Rohr D50 Endstopfen
Dies ist ein Endstopfen für ein HT Rohr mit 50mm Durchmesser.
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
Printablesnotyahc67
Nikon D50 D70 D70S D80 D90 D100 Battery Door Cover Latch
The battery door latch for the D50 D70 D70S D80 D90 D100 cameras can break causing the door to not properly latch shut. This is a 3D printable replacement part for the latch. Print Settings and Recommendations: 0.2mm Layer Height 100%…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp 2.5mm for sheet
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 18
- Likes
- 6
- Rating
- 0
P
PrintablesRPK
Philips bhd501/00 Hair Dryer Radiator Mount
EN : The system was intentionally printed in 2 parts to minimize the use of supports. Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The interface consists of a…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesMarcoPipolo
KLEIN water pump plier GRIDFINITY rack (D505-12, D505-10, D505-7) CAD Include
GRIDFINITY storage rack for the KLEIN water pump plier number D505-12, D505-10, D505-7. The model can be print in one or two part. (Part 1.stl & Part 2.stl) It can also be printed in one part (Full rack.stl). There is the tools numbers…
- Downloads
- 18
- Likes
- 7
- Rating
- 0
P
Printablestiebex
Clips For Light Diffuser Sheets (Dazzne D50 Lights)
My first model upload! Originally I was using rubber bands to keep my diffuser paper up on these lights, but they kept snapping over time. 3D printing to the rescue! These clips were designed with a unique shape to allow them to hook into…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesMarbla
Holder Wavlink UMD502 USB-C adapter
The holder allows the usage of all available sockets on the UMD502 when using the two mounting holes on the back. Take care to leave enough room for the plugs. But as another option you can use the two holes on the side, with limited…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesartyfarty
Sony CA-D50 to battery 3-690-850-01
Sony CA-D50 mentions a mounting bracket p/n 3-690-850-01 to attach a battery adapter or whatever. I doubt that i'll ever see this part in my life, but here is an adaptor which you can print to mount a generic v-mount plate to it.…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp 1mm for sheet metal
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp M2
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp 3mm for sheet
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
Printablesbillieillib
MKS Klipad50 v1.2 Compact Enclosure
Overview This is a sleek, ultra-compact enclosure designed specifically for the MKS Klipad50 v1.2 . The goal of this project was to create a professional, "Open Source" styled housing that protects the electronics while maintaining a…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesPablo Rojas
Phillips CD502 tray polley
A part for 90's audio CD reader. It's available from other countries but not in mine. I've printed it on PLA Max (+) to improve durability. Note: don't try to make the band in TPU, its useless, in the meanwhile I use a simple rubber band…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesWrsm Code
AICOOK - Smoothie-Maker SD50A - Redesign drive pinion
German: Das originale Antriebsrad oder Antriebsritzel sah nicht sonderlich stabil aus und es ist nach nur einige Male nach der Benutzung gebrochen. Da das Modell nicht mehr vertrieben wird (Jahrgang 2018) habe ich es kurzerhand mit…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesMarcoPipolo
KLEIN water pump plier toolbox rack (D505-12, D505-10, D505-7) CAD Include
Toolbox storage rack for the KLEIN water pump plier number D505-12, D505-10, D505-7. The model can be print in one or two part. For printing in two parts, there is 4.8mm guide pin that can be printed with the model the help align and…
- Downloads
- 12
- Likes
- 5
- Rating
- 0
P
PrintablesRinnaus
Sturdy Adjustable Furniturefoot D50mm h=~180... ~230mm
diameter is 50mm height is ~180... ~230mm adjustment by thread fastening with 3 screws
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablesrepcsike
Elops 920 Lock holder for the decathlon LD500
In around 2022 I got an LD500 and I had to keep my lock somewhere and also use the rack with bags, so I came up with this lock holder. You can attach it to the frame with zipties, and I also recommend using velcro on the lower side of the…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesTailsy
Eclipse Solar Filter Holder for Binoculars, Robust w Sleeves OD42 + OD50
Hold your filters tightly and safely without tools or mods to your equipment. This filter holder for binoculars solidly grips via a sleeve, designed for TPU or other soft material. The solid rings clamp the sleeve between them and hold…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
PrintablesNERDCORNER
LED SMD5050 clamp 2mm for sheet
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printableshajo-fix
"RockerFoot" für Decathlon Smarttrainer D100 / D500
Rockerfoot für Decathlon Smart Rollentrainer D100 / D500 Federung / Antivibrationsfüße Ich habe den Fuß mit TPU 98 a gedruckt. Bei 8% Füllung.
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesAndrew Meyer
Reolink D500 Mounting Plate
I designed this part to complete an install in an office building with a drop ceiling. The default mounting options for Reolink cameras appear to be masonry screws and/or wall anchors. The mount is designed to allow you to bolt the…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesCyr!l$
Support DIRIS D50
Support + Gabarit pour DIRIS D50 pour ceux qui comme moi non pas d'emporte pièce carré pour la mise en place.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesSDu
Müllex D50 Gelenk / Joint
Falls die Schrauben bei euch auch aus der Spanplatte der Küche ausreissen, hier ein neues Gelenk für den Müllex D50 mit 6 Schrauben! Am besten aus PETG drucken.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesbirdybro
Zebra ZD500 Ribbon Dowel Tensioner
This model was generated by scanning the original matching part by our Zeiss Metrotom CT Scanner at work by one of our Quality Engineers to save our IT department the cost of having to buy the whole assembly ourselves. Yes, it's a large…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesMrGreen
MetalGrid50 System
I had thought about wire mesh being used for this type of system but I just went with the flow of what everyone else was using. Inspired and motivated by The Newbie Maker youtube channel……he has the same idea to use metalgrid instead of…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesŠlapdriba
"zalgiris" ball stand D50mm-100mm.
"Zalgiris 1440 anno" presentible ball stand. "Zalgirio kamuoliuko laikiklis" Printed on XL
- Downloads
- 3
- Likes
- 2
- Rating
- 0
P
PrintablesdaMario
beer opener holder for table legs d50mm
Made it in PETG (0,4 nozzle, 0,2mm height) with 4x M3 5x5mm thread inserts and 4x M3 counter sink screws to fix the opener to the mount, I used 4x M6 nuts for the back and M6 counter sink screws to put the split mount together. A glued in…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printableseisenfliege
Shelly BLUE Wall Switch 4 ZB to Jung CD500 Frame Adapter
Fitting a Shelly Wall Switch into a Jung CD 500 Frame Switch: https://link.amazon/B0h3HJ0Ou Frame: https://link.amazon/B0jc54g4d Wall Socket: https://link.amazon/B074a1Wh9
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printables3DMake4U
TopGeek Rack - Topping D50 III DAC & Geekom IT13
Modular Rack for my Topping D50 III DAC & Geekom IT13 Mini PC. Should work with other similar sized Mini PCs and DACs. Please feel free to send me a message if you need different sizes. Use glue to attach TPU pads to feet. I sprayed…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
50mm DN50 D50 pipe cap/stub/stop
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
P
Printables
LED SMD5050 clamp 2.5mm for sheet
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
P
Printables
Reolink D500 Mounting Plate
I designed this part to complete an install in an office building with a drop ceiling. The default mounting options for Reolink cameras appear to be masonry screws and/or wall anchors. The mount is designed to allow you to bolt the…
P
Printables
Zebra ZD500 Ribbon Dowel Tensioner
This model was generated by scanning the original matching part by our Zeiss Metrotom CT Scanner at work by one of our Quality Engineers to save our IT department the cost of having to buy the whole assembly ourselves. Yes, it's a large…
P
Printables
Elops 920 Lock holder for the decathlon LD500
In around 2022 I got an LD500 and I had to keep my lock somewhere and also use the rack with bags, so I came up with this lock holder. You can attach it to the frame with zipties, and I also recommend using velcro on the lower side of the…
P
Printables
VACUFLEX PU 400 C ECO ID50 mm vers cyclone dust commander
VACUFLEX PU 400 C ECO ID50 mm vers cyclone dust commander