1 / 7
Nikon D50 D70 D70S D80 D90 D100 Battery Door Cover Latch — image 1
1 / 7

Nikon D50 D70 D70S D80 D90 D100 Battery Door Cover Latch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The battery door latch for the D50 D70 D70S D80 D90 D100 cameras can break causing the door to not latch shut.

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

The battery door latch for the D50 D70 D70S D80 D90 D100 cameras can break causing the door to not properly latch shut.

This is a 3D printable replacement part for the latch.

Print Settings and Recommendations:

  • 0.2mm Layer Height

  • 100% Infill

  • No Supports

  • Recommended: Print on a smooth bed plate as the imprinted texture from textured beds can cause the latch to not slide.

Installation:

  1. Hold the battery door at about 45 degrees from the camera bottom

  2. Give it a firm tug to remove

  3. Peel back the paper label

  4. Unscrew the two screws in the metal plate

  5. Remove the broken latch

  6. Replace the latch

  7. Replace the two screws

  8. Reinstall the battery door by pushing it in at a 45 degree angle

Tags