Search results: d100

Counting matching models…

Printables

Soleilwear Screwdriver Kit Model JD1006 Holder (HSW)

Soleilwear Screwdriver Kit Holder (Honeycomb Storage Wall Compatible) - Remix I wanted a HSW compatible holder for my Soleilwear Screwdriver set (Model JD1006). This one:…

Order a print of this model

Printables

3d Balls in Ball PLAY D100/D16 or D80/D13, for high IQ:)

i Propose balls (42) 1color 16x 2colors 14x 3color 12x or can you try 14x from every color i thing this puzzle will be hard Ball i connect with Glue, opening 3,3/2mm is for positioning meaning probably better print ball full with support…

Order a print of this model

Printables

Stand for Marklife D100 thermal printer with support for fanfold labels

The thermal printer stand. Suitable for any thermal printer with a base of 182mm x 100mm. It can support a stack of labels about 72mm high. The original was made for a Rollo label printer, but with a few adjustments it fit perfectly on my…

Order a print of this model

Printables

Propeller Cutter d100 MK1

Passend für: https://www.amazon.de/Proxxon-28472-Feinbohrschleifer-FBS-240/dp/B000NPAA0C/ref=sr\_1\_4?ie=UTF8&qid=1466344311&sr=8-4&keywords=proxxon+dremel 3mm Fräser Achse:…

Order a print of this model

Printables

Joint pour chasse d'eau D100mm / flush washer

A imprimer en TPU, rondelle de jonction entre la chasse d'eau et la cuvette. Sans fuite avec un remplissage de 10% en gyroïde.

Order a print of this model

Printables

Bin for Coaster D100mm

Simple Bin for cup coaster innerdiameter 100mm outerdiameter 109mm hight 68.25mm

Order a print of this model

Printables

D&D D100-10 dice

Order a print of this model

Printables

Gridfinity Deoxit D100L 25ml bottle holder

A Gridfinity holder for a 25ml bottle of Deoxit D100L. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws depending on your preference.…

Order a print of this model

Printables

Point Counter / D100 dice

What: 2-digit points/levels counter for board games. The idea was to make a cool counter that can be printed and assembled without any additional tools or screws. Since I finally assembled and mounted MMU2, cylinders come in 2 variants -…

Order a print of this model

Printables

Extension for Commercial Chef CCD100W6 Dehydrator

The important points: An extension to use the 235mm (9.25 inch) CCD100W6 dehydrator for drying filament. I don't have much space, and wanted to use the smallest dehydrator I could find that still had at least 10mm of clearance around the…

Order a print of this model

Printables

SkyRC D100 / D200 NEO LiPO stand

Stand pour SkyRC D100 / D200 NEO. Le chargeur chauffe beaucoup, je conseille d'imprimer en ABS/TPU. Pièces imprimées sans supports.

Order a print of this model

Printables

Soleilwear Screwdriver Kit Model JD1006 Holder (HSW)

Soleilwear Screwdriver Kit Holder (Honeycomb Storage Wall Compatible) - Remix I wanted a HSW compatible holder for my Soleilwear Screwdriver set (Model JD1006). This one:…

Order a print of this model

Printables

Rocker Plate Feet Tennis Ball Feet for Van Rysel D100 Trainer

A remix of a Rocker Plate Feet originally designed for the Wahoo KICKR Core . The hole diameter is adjusted from 55.90mm to 49.20mm for compatibility with the Van Rysel D100 trainer . The original text on the model is also removed. I've…

Order a print of this model

Printables

HOMPLEX HD100 PRO WallPlate

A wall plate for fixing a HOMPLEX HD100 Pro on the wall that I've created since the detector I bought was missing it in the package. It can be printed in PLA or PETG, 10% infill. Some supports are needed on the clips that go into the…

Order a print of this model

Printables

3d Balls in Ball PLAY D100/D16 or D80/D13, for high IQ:)

Order a print of this model

Printables

Godox Lux Master Pro to AK (AD100/V1/V100) Accessory Adapter

The model allows the Godox Lux Master flash to use the AD100/V1/V100 magnetic mounted accessories. The model will need a manually configured pause for magnet insertion. Its setup for 16 total 3mm x 1mm magnets. two stacks of two magnets…

Order a print of this model

Printables

D100 Dice (D%) - Dungeons and Dragons

D100 Dice (D%) - Dungeons and Dragons 100 Dice (also called D%) Great dice for dungeons and dragons. Check out my profile for more dice shapes. For commercial use, you can copy and paste attribution from here:…

Order a print of this model

Printables

Dummy Flash Shoe for Godox AD100Pro and Leofoto FA-09

Some Explanations: Surely the Godox AD100pro comes with a quite usable fastening and so there is firstly no need for a 3D Printed part. But in my case i needed a minimised distance between a small "ball head" (in this case the LeoFoto…

Order a print of this model

Printables

The real "full" dice set: D1-D100

When talking about a "full" dice set, most people think about those standard D&D sets like D4, D6, D8, D10, D12, D20 and D100. But those are just the 5 platonic solids plus the 10-sided ones, and that's not that much. There are no…

Order a print of this model

Printables

Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets)

Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…

Order a print of this model

Printables

D100 Dungeon Timetrack

A time tracker for D100 Dungeon to save the printed one from wearing out so fast, and this also saves me a few seconds each turn. I use two pegs to track time, like on a cribbage board, so I don't lose track of my current position as I…

Order a print of this model

Printables

Tennis Ball Feet for Van Rysel D100 Trainer (40.3 mm tubes)

My Decathlon Van Rysel D100 trainer has 40.3 diameter legs, so I had to remix the existing model. The hole is now 40.4 mm. With my printer/trainer it is a snug fit, but possible to insert without a mallet or hammer.

Order a print of this model

Printables

d100 reading orb

d100's are notorious for being difficult to read. with this print you'll be able to put your d100 inside, swirl it around, and read the number. the top of this print is designed with a hole on the top so that you can see what number comes…

Order a print of this model

Printables

Hiplok d1000 holder for omnium cargo bikes

Needed is 4 threaded brass inserts for m4 2 m4 x 20mm 2 m4 x 25mm

Order a print of this model

Printables

Van Rysel D100 and D500 Smart trainer rocker feet

Rocker feet for Van Rysel D500 Smart Trainer (V2)

Order a print of this model

Printables

Stand for Marklife D100 thermal printer with support for fanfold labels

Order a print of this model

Printables

"RockerFoot" für Decathlon Smarttrainer D100 / D500

Rockerfoot für Decathlon Smart Rollentrainer D100 / D500 Federung / Antivibrationsfüße Ich habe den Fuß mit TPU 98 a gedruckt. Bei 8% Füllung.

Order a print of this model

Printables

Nikon D50 D70 D70S D80 D90 D100 Battery Door Cover Latch

The battery door latch for the D50 D70 D70S D80 D90 D100 cameras can break causing the door to not properly latch shut. This is a 3D printable replacement part for the latch. Print Settings and Recommendations: 0.2mm Layer Height 100%…

Order a print of this model

Printables

Wire spool D100 mm

Wire spool for cables. Consists of two parts. Spool diameter: 100 mm. Bore diameter: 21 mm.

Order a print of this model

Printables

Ulanzi D100H Dial protective cover

Print from TPU. Use M3 nuts and M3x6 button head cap screws to assemble the parts.

Order a print of this model

Printables

Potion-Vial Dice — Rolling d10 / d100 + Apothecary Display Stand (OpenSCAD)

Rolling-log d10 dice shaped like an alchemist's potion vial — a faceted glass body, a tapered neck and a cork. You roll it like a log; the rounded bottom and tapered top can never rest stably, so it always settles on a flat body face —…

Order a print of this model

Printables

Magnetic Honeycomb Grid for Godox Round Head Flashes (AD100, AD200, V1)

Print settings Choosing the Beam Angle This model uses PrusaSlicer's Honeycomb infill to generate the optical grid. Honeycomb grids can project wider or narrower beams depending on hexagon size and depth - see photos for reference (shot…

Order a print of this model

Printables

D100 Tracker

Did a quick modification to create a game tracker for the game D100 Dungeon. https://www.mk-games.co.uk/ You will need to get the number rings and cores from the original counter. https://www.thingiverse.com/thing:3131551 Depending on…

Order a print of this model

Printables

Commercial Chef Dehydrator CCD100W replacement impeller fan

Replacement impeller fan for Commercial Chef CCD100W. Print in ABS! Do not print this with anything less than ABS-level heat tolerance. I didn't try any other filament types. Press fit onto the motor shaft. Don't press it down all the way…

Order a print of this model

Printables

Junsun D100 holder

Universal car holder for Junsun D100 (7 inch). It has hole for all ports including camera. You can put filament to connect both parts together. holder_stand To attach it onto something, make holes into holder_stand and attach it anywhere…

Order a print of this model

Printables

Dehydrator Tray Extension for Commercial Chef CCD100W6 (formerly Westinghouse WFD100W)

Update 2021-02-24: If you're looking for an 88mm height, take a look at Sharkoctopus's remix at https://www.thingiverse.com/thing:4754084 which locks the pieces to each other all the way up. Update 2020-09-23: francisesmodewhite found it…

Order a print of this model

Printables

Radial Fan Replacement D100

A radial fan I used to replace the broken one inside my food dehydrator. Outer diameter is 100mm, thickness 11.3mm, press-fits onto the 5mm axle of the motor. The two through-holes are meant for easier removal of the fan from the axle…

Order a print of this model

Printables

MakerX D100 ESC Case

Slim case made for the MakerX D100 ESC. Features: Built to be mounted under the skate deck, with the phase bullet connectors plugged inside the case for protection. Cooling intake holes and exhaust holes (shared with the connectors hole).…

Order a print of this model

Printables

Headphone part Sony MDR-XD100

For those people who has this headphone I have designed the replic of the speaker's support

Order a print of this model

Printables

Averatec Mouse Battery Cover Model TGM-6000R D1002UHCE-1

I'm curious to how many are actually using this, so if you use it, please like it! Our battery cover broke for our Averatec All In One 22" a long time ago and I've been fighting with keeping the batteries sitting properly in it ever…

Order a print of this model

Printables

Mounting Clamp CAT EYE Taillight TL-LD100

Printed in PETG. No support needed. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 7 % Category: Automotive

Order a print of this model

Printables

Kronleuchter-Armhalte-Reparaturflansch D10mmRohr auf D100mmKranz

Unauffällige Reparatur von einem historischen Kronleuchter mit 4 M3 Gewindebohrungen.

Order a print of this model

Printables

skyrc d100 replacement feet

Broke one of my legs, so i made one to replace it. advise to use petg, abs or tough pla (for flexibility) i printed mine in petg. best layer ht of 0.1

Order a print of this model

Printables

DN110 female-D100 male adapter

Can be used to connect a D100 hose to a DN110 system. You should use an original gasket of the KG pipes. Groove is provided accordingly.

Order a print of this model

Printables

DN110 male-D100 male adapter

Can be used to connect a D100 hose to a DN110 system.

Order a print of this model

Printables

Desiccant Dehydrating Container for Commercial Chef CCD100W6 / Westinghouse WFD100W

This tray is a resized remix of @sblomfield trays for the Commercial Chef CCD100W6 / Westinghouse WFD100 utilizing infill meshing. It is sized to fit precisely between the stacked plastic trays which come with the dehydrator. Top and…

Order a print of this model

Printables

Soporte VESA-D100/75 - VESA Support D-100/75

SPA Soporte para monitores de hasta 27" con montaje tipo VESA cuadrado de 100 mm. y 75 mm de lado. Hay 2 versiones de la base. Para imprimirlo en 2 partes para impresoras de 250 x 250 mm. de cama. Y otra versión de una base para imprimir…

Order a print of this model

Printables

D100

Infill: Can print with 20% but 100% gets best results Supports: Yes Adhesion: Yes

Order a print of this model

Printables

Dehydrator Tray Extension for Westinghouse WFD100W (Single part)

Found @davidhbrown model to be a perfect fit on my bed, I went ahead and remodeled the whole thing in F360 in 1 single part. Should be almost a 1:1 replica from his FreeCAD model. The "upper_pins" might be slightly different, but should…

Order a print of this model

Printables

Pioneer GM-D1004 BMW E46 bracket

This bracket allows to mount the Pioneer GM-D1004 amp in place of the factory amp in the trunk. I used PETG and it works fine. Put some automotive Tesa tape on the metal ears before sliding the bracket to dampen vibrations. If You are…

Order a print of this model

Printables

Filament Spool Spinner for Commercial Chef (Westinghouse WFD100W) Filament Dryer

This is made to fit on the bottom tray of a Commercial Chef (Westinghouse WFD100W) Filament Dryer/ Food Dehydrator. Nine ¼" inch Ball Bearings roll inside a track allowing the spool resting above it to spin effortlessly. (honestly, it…

Order a print of this model

Printables

Die d100 for ttrpg or boardgames.

This is a d100 die for you to play ttrpg games or others. The dice is not totally fair as that is impossible for 100 faces but I tried to make it as close as possible. I tried it and works fairly well. Print instructions: You should print…

Order a print of this model

Printables

DnD Scroll for D100 Tables

Intro First, some context. A D100 is a 100 sided sphere shaped die, or it's a pair of ten sided dice known as percentile dice . Your DM/GM may ask you to roll a D100 to determine what random loot you find, what conditions you may…

Order a print of this model

Printables

Godox Gobo Projector V1 AD200PRO AD100PRO

I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…

Order a print of this model

Printables

dAny - parametric Any Number Dice (d19 d7 d13 d21 d20 d9 d100)

This design is based on spacing points as equally as possible on a sphere (using charge-like relaxation optimization) and then cutting planar slices perpendicular to those directions. This make fairest as possible dice for any number…

Order a print of this model

Printables

Desiccant Holders for Commercial Chef CCD100W6

A useful print to hold indicating desiccant. When the desiccant changes color and has absorbed all the water has held it needs to be dried out. This typically involves laying it out on a cookie sheet and putting it in the oven for a…

Order a print of this model

Printables

Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder - easy removal

Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder for the Solar Eclipse. The glass filter is a force-fit. However it is easy removal from the Seestar for totality.

Order a print of this model

Printables

Dehydrator Tray Extension with Replica of Original Pattern for Commercial Chef CCD100W6

Printed on my Bambu P1S using PETG. Some filaments spool is bit tall, so I would suggest to print 83mm though 73mm can fit most.

Order a print of this model

Printables

TP-Link TL-SD1009P DIN Rail Adapter

Works in both orientations to suit any use case. Power supply is attached with two 5mm cable ties. Requires 2x DRP-02 Mouser: https://mou.sr/3PErJWP DigiKey: https://www.digikey.com.au/short/b9p5npf3 Jaycar:…

Order a print of this model

Printables

Dummy 13 MS Gundam Barbatos (Neck_Frame_Head100%_to_body150% and Long_Frame_Shin150%_to_ankle200%_and_foot200%)

Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files

Order a print of this model

Printables

Commercial Chef CCD100W6 Dehydrator Rubbermaid Storage Retainer

Retaining clips that snap onto the Commercial Chef food dehydrator. The unit is 240cm in diameter which is almost the exact same size as the Rubbermaid Commercial Products round storage container which I got on Amazon for less than $8.…

Order a print of this model

Printables

D&D D100 dice full (plus halves with key for alignment for halves)

D100 dice with key for alignment

Order a print of this model

Printables

CityBoss D1000LH stand extender

Installation: You just put it on and glue it. Printing: 4 perimeters 100% infill PETG

Order a print of this model