Counting matching models…
Safely wall mount SwitchBot Hub Mini and Hub Mini Matter Enabled hubs using command strips. Includes version with two holes 40mm apart. Print as pictured. No supports needed. 5 perimeters gets a nice slot peg top.
WiZ Motion Sensor adapter plate for mounting to walls with no damage. Use one M4 x 6mm screw to attach factory WiZ mount to plate. Mounting Plate versions in round or square, adhesive (i.e. Command Strip) or four 3mm x 10mm magnets. Print…
Safely wall mount Philips Hue Bridge and Philips Hue Bridge Pro hubs using command strips. Includes versions with two holes 40mm apart. Edit: Added Bridge Pro Command Strip and Skadis versions. Print as pictured. No supports needed. 5…
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
Black Battle Damaged Sci-fi Knight Mask Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
White Battle Damaged Sci-fi Knight Mask Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
Simple model, just carved out some damage onto a.t.a.b. to make it look like swiss cheese or smth. No supports (somehow) as no overhangs were added.
ErgoGrip Bed Scraper – Designed for clean, safe print removal This scraper is built with a precise edge angle to slide under prints easily while minimizing damage to your build plate. The knurled handle improves grip, giving better…
This is the second set of Pokemon Deckboxes. Skitty, Staraptor, and Meinfoo. The boxes will fit an unsleeved Pokemon deck and has a pocket for a coin and damage tokens. Category: Toys & Games
This is a Pokemon deckbox similar to the Yu-Gi-Oh and Magic deck boxes I made. This holds a standard deck with room to spare and has a side compartment for a coin and damage tokens. Category: Games
I made these tokens to replace the damage tokens in my copy of Tales from the Red Dragon Inn, since they looked too similar and had to be stored in separate bags. Made with build123d with source code attached, so you can change the text…
Self-Watering Seedling Tray for 7x7 cm Pots This tray is designed to perfectly fit 6 seedling pots (7 × 7 cm) and enables an easy and efficient bottom-watering system for your plants. 💧 How it works Simply fill the tray with water and…
A compact and foldable seedling pot designed for quick and efficient 3D printing. This planter prints flat and folds into a sturdy 7x7x7 cm box, making it easy to store, transport, and assemble. Perfect for seedlings, small plants, or…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
A Base staton mount that doesnt require drilling or damaging your walls. These mounts use standard Command Large strips and provide a very strong/secure vibration free mount for your base stations. BOM: 1x 1/4-20 x 1/2" long screw (such…
Simple holder to hang electric bug zapper swatter using command strip. Single layer parallel electrode style.
Simple design of damaged gate like structure or entrance of some sort, for table top RPG or similar Feel free to check my other models, like, comment or recommend :) Thank You and happy printing.
I made these because I found it easier and cleaner than placing, removing, and counting damage cubes when attacking and repairing. I laid the model down flat before printing. Enjoy
Simple damage markers for miniature games. Print in red with black numbers for best effect.
This is a simple Tray for the damage cubes from Flash Point Fire Rescue, taking them from bottom to top in each row starting with the right-hand side shows house Integrity at 75%, 50% and 25%.
This is more of a "lop off the end" than a remix. I liked that the bottle opener part of the UBO didn't damage the cap, since I collect bottle caps for a friend overseas. Anyway, I wanted just the opener part, so I cut off the end, filled…
Replacement part for the damaged part of Modultop Berlingo 2016.
I designed this in Tinkercad to complement Sigismond0's X-Wing Template Stand and Token Holder. https://www.thingiverse.com/thing:1359453 I do not use the STANLEY box for organizing my X-Wing supplies so the design may have to be tweaked…
Just a simple cover that you can glue in place. It has the middle extruded so if you're installing on an installed door it will sit on the hole while the glue dries so it won't slip. Personally, I secured these with hot glue as it sets up…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This is an Ancient Column that has suffered a little damage and got turnt into a Pen holder or a Planter:) No special requirements for…
Have fun with your Lorcana deck by not having to worry about losing you damage and Lore counters with this container I just made.
Just a remix of the excellent base damage tracker by Bowser KOTK. I wanted a version that fit in the box side by side, and with no lid lift leaving the instructions and card inserts in place. I recently got the Clone Wars edition, and now…
Damage counter dice for the TCG. Use the Hundred marker for damage over 240. Category: Toy & Game Accessories
3 Damage Counters that have increments of 10. 1st die - 10-100 2nd die - 110 - 200 3rd die - 210 - 300 Good for Pokémon TCG
Fix damaged auto/car corrugated hoses. I needed it for a 74mm corrugated hose, but it can be used scale tool at the slicer and can be adapted for other size hoses. I recommend printing with PETG or with ABS plastic if the temperature is…
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Here moore FREE models: https://cults3d.com/es/usuarios/Artoys3dPrint/modelos-3d Separated by pieces: -Head -Jaw -Up Theet -Down Theet -Mechanical Jaw Follow me in Cults :) Category: 3D Printing
Printed in pieces on the Prusa Mini+ in Hatchbox Grey PLA. I will need to do some post processing to fill a few little gaps. but all together, beautiful model and such cool details.
Simple double sided token for use with the Arkham Horror RPG for tracking player damage and horror. Seems to work best printing the horror side down and changing filament halfway through. I recommend using red and blue filaments. 3mf file…
Lid guide to prevent damage on Festool Systainer3 SYS3 M 337 and SYS3 M 437 The tall Systainers can easily become deformed. This can result in damage of the Systainer when closing the lid. This lid guide fits into the edges of a Systainer…
Minimal supports for a couple of them. All unique with flat bottoms for printing. Oil drum miniatures. High detail and scalable. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Something my daughter made in Tinkercad. She also took the pictures herself. I'd highly recommend using supports.
Damaged-Weathered Star Wars Data Pad Not sure what this is good for. But I put in some time on this experiment, so I decided to publish it. Originally, I wanted to work out as a switch plate cover. It did not make the grade. The layout is…
This is a simple parts to replace damaged Creality K2 Plus back panel standoffs. Like many of you my new K2 Plus arrived with a little damage. I didn't even notice this was broken until I went to perform input shaping and the back of the…
Print No supports needed. Tested with PLA. Print instructions I recommend 20% to set the fill. The complete kit consists of seven dice: 3x 10-60, 2x 70-120, 1x 130-180 and 1x YN. Die dimensions are approx. 12 x 12 x 12 mm. Link for dice…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
Version of the V2 Kerfur head, but with HURT. Includes a version with AI chip merged and not merged. Pair with cracked screen face plate for EXTRA EDGE. Use supports for main head. Version picture printed at 150%, and even at this scale…
These are token holders for the Horror and Damage tokens found in the board game Arkham Horror - The Card Game . I took the inspiration from @RedWizard24 's Resource Token Holders . After printing them I wanted to have the same feel with…
Simple print, 3mf file sliced in orca slicer for a k2 with the colour change in place. Colour change goes in at layer 21-22 for a 0.2mm layer height. Yes, I could have made this out of actual lego but I wanted to practice modelling.
Full size Slayer armor from Doom The Dark Ages. This model has these STLs: RENDERS UPDATED: -Helmet x 2 - Normal and Thicker version added -Front chest protectors -Back and neck protectors -Middle Body Attachments updated -Right Arm…
repair side for a cardboard reel filament . for laser DFX file and for FDM . size 210 OD ID 40mm thick 4mm
Customized version of https://www.thingiverse.com/thing:1039106 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1039106 I just used a steel ruler and a hairdryer to soften the print so that I can get good…
These are damage counters for the pokemon trading card game (or any game that needs 10, 20, 50, 100 counters). They are double-sided so you can always see the number. For each coin, you will print two inner disks and one outer ring. They…
I was working on designing a Pride brick keychain when I came across Nat's ‘Pride Brick with Battle Damage’. I liked it much more than the design I had come up with and decided to remix it to use as a keychain or bag charm. I also created…
About two months ago, I was introduced to the gorgeous helium neon laser. I quickly found one on eBay, and set to work designing an enclosure to show it off. After a lot of printing, design work, wiring, painting, sanding, painting again,…
Wanted to try my hand in using Plasticity to make a marker. And here's the results! I might have made the token a little too big. The dimensions are: 25.18 mm (diameter) 1.32mm (Number 1) 2.36mm (z axis/height ) Let me know if there is…
This remix if for four variations of a 12mm Pokemon TCG Damage Dice. The damage values for each are: 10-60, 70-120, 130-180 and 10-50+100. Print the first layer at 0.2mm with the same precautions mentioned in the original design. I…
Ever had to discharge water from an 9 year old speaker because you thought it is water proof? Well you are at the right spot… kinda. The battery compartment was once damaged a long time ago due to throwing it around, thus making it water…
HD and SD versions are identical except for resolution. The SD version was created to reduce overall file size.
HD and SD versions are identical except for resolution. The SD version was created to reduce overall file size.
Since I made model tooo small, (especially with the letters) I had to use my 0.2mm hotend to print. I don't know how the quality will be for those using 0.4 and higher. But hopefully it looks neat!
I ran out of little paper damage counters so I made this.
Safely wall mount SwitchBot Hub Mini and Hub Mini Matter Enabled hubs using command strips. Includes version with two holes 40mm apart. Print as pictured. No supports needed. 5 perimeters gets a nice slot peg top.
Inspired by the heavily damaged arm Optimus sported in the Skybound comics - here's our take on creating the swappable damaged limb for SS86 Optimus Prime! Here's a quick look at a set of this, complete with a variant pair of hands - one…
WiZ Motion Sensor adapter plate for mounting to walls with no damage. Use one M4 x 6mm screw to attach factory WiZ mount to plate. Mounting Plate versions in round or square, adhesive (i.e. Command Strip) or four 3mm x 10mm magnets. Print…
Need a quick damage counter? Look no further! Its a 4 Piece Print with a Colourchange you can do without MMU. Simply Import the Dials in your Slicer, Seperate to Objects, and make the Dials Unprintable. Now you are just left with the…
A case and dispenser for an X-Wing damage deck. The "small" version holds the standard size decks. The "large" version holds the larger damage decks given out with preorders at the launch of second edition. Post-Printing The pegs can be…
Safely wall mount Philips Hue Bridge and Philips Hue Bridge Pro hubs using command strips. Includes versions with two holes 40mm apart. Edit: Added Bridge Pro Command Strip and Skadis versions. Print as pictured. No supports needed. 5…
A very simple puck/disk for your filament vacuum bag. The disk is highly breathable while simultaneously providing full support for the entire valve without damaging it. The bags can be reused multiple times without losing their seal .…
The position of the command strip ensures the load is mostly in shear; this allows for holding a much heavier device without the risk of release. 2 Sizes are included; the large one fits 2 command strips and can easily hold an RAXE500…
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Przemekgda86 provided an excellent idea to design a vacuum bag disk with "flat" top surface which causes minimal damage on the valve of the bag . They maintain air flow by a meshed structure which is realized by tweaking the slicer…
If you are addicted to crochet (or "hooked" on amigurumi), you know the struggle: you run out of desk space fast. I designed this floating hex-shelf to get your creations off the desk and onto the wall without using nails or screws. This…
This mask features deep cracks, broken plates, a missing armor piece, sharp engraving lines, and an aggressive respirator — all in one clean, solid-color model optimized for fast and reliable printing. The eye cutout is wearable right off…
Tokens to mark damage points for the Pokemon card game
Hi I designed a damage counter working with two magnets. I used 6x2 round magnets and it works ok. For one battle 10x counters should be enough. Compatible with MMU / AMS
Hello, The model is provided in 28mm (1/56) but it can be easily adapted to your scale : to 15mm (1/100) : x56% to 20mm (1/72) : x78% to 25mm (1/64) : x88% to 1/48 : x117% to 1/35 : x160% In partnership with the designer 3D Fortress.…
Hello, The model is provided in 28mm (1/56) but it can be easily adapted to your scale : to 15mm (1/100) : x56% to 20mm (1/72) : x78% to 25mm (1/64) : x88% to 1/48 : x117% to 1/35 : x160% In partnership with the designer 3D Fortress.…
These are the icons found on either side of the stamina/damage chips for Agemonia. There are 3 included icons. The top left is the damage icon, the bottom is the stamina icon, and the top right is a stamina icon as it appears on the…
Destroyed residential house with broken roof and damaged walls, perfect for war scenes and post-apocalyptic dioramas.
Description This model is a clip-on bedside shelf for the IKEA HEMNES bed , designed to be mounted without drilling or damaging the bed frame . It is adapted for a 200 mm wide and 18 mm thick wooden shelf , making it ideal for a child’s…
If you're playing Company of Heroes board game, and keep forgetting about Splash Damage (as I do), this small token can help you remember. Scale it freely for best visibility.
Black Battle Damaged Sci-fi Knight Mask Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
White Battle Damaged Sci-fi Knight Mask Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
The model works equally like the og version, but the sides resemble a TIE Fighter and the numbers are in Aurabesh font. If you like what I do, [Buy Me a Coffee]( https://www.buymeacoffee.com/hypercritter ), or a [Ko-fi](…
Simple model, just carved out some damage onto a.t.a.b. to make it look like swiss cheese or smth. No supports (somehow) as no overhangs were added.
Thank you for using the MTG Damage Counters! Print as many as you need for your next game of Magic. Here are the assembly instructions: Slot the two counter wheels between the two tube-shaped pieces and push tight, still allowing the…
ErgoGrip Bed Scraper – Designed for clean, safe print removal This scraper is built with a precise edge angle to slide under prints easily while minimizing damage to your build plate. The knurled handle improves grip, giving better…
Models were created by using photogrammetry. Used Vallejo Earth Paste around the model and painted it by the template of the Original Tile. Printed in 0,2mm Layer, 15% Infill. Need simple Supports for the small overhangs. An hour print…
Watch YOUR 3d printer be a failure as bed adhesion, warping and stepper issues take over your 3d printer, feel deep EMOTIONAL DAMAGE. Send this file to someone who is knew to 3d printing! SUPPORTS: OF COURSE NOT ITS ONLY A CUBE THAT WILL…
I designed this as a way to provide some complete cover along the back lines for MERCS, but it could be used in just about any urban/sci-fi miniatures gaming. Instructions OpenSCAD for the majority of the model, plus Blender to finish…
Custom holder designed specifically for pools with enclosure like Marimex Pool House Control 3,05 m. Unlike standard mounts, this design prevents damage to the enclosure tarp , which is a common issue when using classic skimmer holders. 🔧…
This is the second set of Pokemon Deckboxes. Skitty, Staraptor, and Meinfoo. The boxes will fit an unsleeved Pokemon deck and has a pocket for a coin and damage tokens. Category: Toys & Games
!["Ami-Perch" – Damage-Free Display for Amigurumi [Version 2]](https://media.printables.com/media/prints/17d4cefb-7fbc-4f17-96c0-1a88a0031bef/images/11556343_aabb8a41-2b97-4951-b89f-2dd77a08cca6_323e8668-5b2b-43fc-9e25-4a73658578cf/v2-app.png)
