Counting matching models…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Description Dummy 13 joints adapted to Hardy Daytona. Printing: Layer height .2 mm, 15% infill and 2 walls per layer. Most parts requires support. Print the fork joint (instructions step 1) with ABS/ASA/PETG. Print the fork (instructions…
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. For the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
Background This is a tray to use instead of the cover on the Harbor Freight Daytona Super Duty 3 Ton service jack. I find myself wanting to put lugs nuts somewhere when pulling off the wheel so this is a good place to store them or other…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This is a detailed model of the Ferrari Daytona engine, driveshaft and transaxle. It should fit into any 1-124th scale Daytona model, other than the “Miami Vice” fake Daytona because it is based on a Corvette. It also makes a very nice…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Story: So I live in Europe and my Daytona hop-up bucking broke I didn't find any vendor that resells their hop-up buckings so I tried 3d printing one from flex. Print it from the softest flex you can get or print I printed mine from shore…
A Blinker support for the street triple/Daytona blinkers. My 2011 Triumph street triple had all of the blinkers broken due to the support being to dry over time. Here is a remplacement part for the support. It is plug n play, all you have…
I wanted a rubber or tpu jack pad for my Harbor Freight Daytona Superduty DJ3000 floor jack. I could only find one for sale on Amazon, but as I'm trying to learn F360, this seemed like an easy enough thing to make. I've included the STEP…
This is a blanking plate for use on a Triumph Trident 660 motorcycle when removing the rear foot pegs. This is designed as an alternative to the R&G Blanking Plate BLP0047BK, which works on the Triumph Trident 660 and the '15-19' BMW…
1964-65 COBRA DAYTONA Winner, 1965 Monza 1000 km, driven by Bondurant/Grant, Finish Line Plus Bondurant (left) and Grant cruised to victory, unchallenged on the banked Monza circuit. Apr. 25, 1965 Ford decided to focus their energy on…
Redesigned from a design found on Printables https://www.printables.com/model/524457-daytona-super-duty-3-ton-jack-tray?fbclid=IwAR3cY-XXIQPqueZ9KLArGQRBsJjeAVgNg6v-U4WDaBrFKODem-B4fBxTNQY I wanted a few things different including…
As of writing this, there are two slightly different versions of Daytona 6 ton jack stands sold by Harbor Freight. One has a center column width of about 28mm and the other about 32mm. This is for the 32mm version. You might be able to…
Dodge Charger Daytona 1969 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Daytona TT-25 mount for Simonn Brake Pedal
Winner, 1965 Monza 1000 km, driven by Bondurant/Grant Bondurant (left) and Grant cruised to victory, unchallenged on the banked Monza circuit. Apr. 25, 1965 Ford decided to focus their energy on racing the new GT40 and Shelby American…
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
Ferrari Daytona SP3 Serie Icona Red Magma - Open Roof
2D-Silhouette einer Triumph Daytona 675R: Einfach gehaltene Konturansicht eines sportlichen Motorrads mit typischen Linien und Proportionen. Geeignet für den 3D-Druck und vielseitige Anwendungen.
Devided to two parts ( M ale and F emale) for small printers like E3 S1. 4 wall lines, 20% infill, PLA, no support. Not perfectly precise, but simple and works.
This fits directly on the pedal mount, but does require drilling 4 8mm holes. I printed off the mount, offered it up, and marked the hole through the print for alignment. You'll need M8 90mm cap heads for the design, as well as some m8…
Throttle tube for the Triumph Daytona 765 Moto2 to fit after market grips. The original part is T2044901-1473. I measured that and modeled a new tube that would fit my after market grips. Use at your own risk. You need to print them in a…
You can adjust the width of the hook in the OpenSCAD file. 30mm is pretty strong. I wouldn't recommend getting any lower. You can also put your own text on it. By default it just says “Daytona”.
Cobra Seat, Daytona Line, Adjustment Knob. Circa 2000. The image is the splined shaft. Turn the knob will angle seat back forward or backwards. Update (6/23/24): Split the knob into a two part print, the main knob body and the spacer, so…
Ferrari Daytona SP3 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
UPDATE: NEW INTERNAL CLAMP STYLE ARE EXTREMELY EXPERIMENTAL NOTHING HAS NOT BEEN TESTED YET!, WHEN I TEST IT AND CONFIRM WORKING, I'LL REMOVE ALL OF THIS BETA STUFF AND WARNING. Same M10 as stated below can be used if you are feeling…
This is to complement a floor jack wall mount I printed designed by Manning the Printer . This is specifically designed for the Harbor Freight Daytona 1.5 Ton Professional Racing Series Aluminum Floor Jack. Was originally leaning it up…
Daytona bezel remover tool just slide under the lip and squeeze until it pops out. use at your own risk.
A little boredom and some Jack Daniels resulted in a magnetic mount for the new Daytona Pinch Weld Adapter from Harbor Freight. Stupid simple and holds the adapter strongly at all orientations. I used two #6 x ½" screws and left the just…
Not designed for sliding. Chances are if you crash, your clip on will be junk anyway. Split design uses the bolt to hold this into the bar with just friction. I recommend you print with 100% infill for less chance of layer split. May fit…
I could not find a suitable model for this DAYTONA 1.5T Aluminum racing jack from Harbor Freight, so I made one. Disclaimer: This is not guaranteed to fit other models of Harbor Freight/Pittsburgh/Daytona jacks. This has only been tested…
I bought a Daytona DLP2000G 2000kg Low Profile Service Jack and was unhappy with the idea of the 2-piece handle moving around in the boot of my car while travelling to jobs so i made this basic holder to hold the two pieces together. next…
The Daytona 3-ton floor jack from Harbor Freight does not come with adequate padding on the handle. If the metal handle were to bump into a car's body, it could leave lasting scratches or chips in the paint. To remedy this, an additional…
Replaced the crappy thin plastic insert with a more solid PETG one so it doesn't break in 20 seconds
As the Ferrari is quite heavy, I have reinforced this version. Set infill to 30% or more.
Plymouth Superbird Dodge Charger Daytona Wall Art
Replaced the crappy thin plastic insert with a more solid PETG one so it doesn't break in 20 seconds
I bought a Daytona DLP2000G 2000kg Low Profile Service Jack and was unhappy with the idea of the 2-piece handle moving around in the boot of my car while travelling to jobs so i made this basic holder to hold the two pieces together. next…
please rate the model. This is a very dettail diorama
Commissioned by an automotive designer and scale model builder and published with their permission. 289 fia or daytona coupe wheel rims for a Cobra scale model car based on FIA drawings and photos as reference, the model itself is about…
Restore your Triumph Daytona to perfection or give it that clean, solo-rider look! Cracked, lost, or impossible-to-find original seat cowls are a common headache for Daytona owners. This high-precision 3D model, created from a scan of a…
WARNING: 3D printing parts to hold thousands of pounds is sketchy! DO NOT use this as the sole method of holding up your vehicle. Inspired by this design for a different car/stand combo. I reworked it for my W212 + the good 3 ton Daytona…
Overview Tired of that awkward, exposed handle socket on your Daytona 3 Ton Low Profile Floor Jack gathering dust and grime when the handle's stowed away? This simple 3D printed cap seals it up perfectly, keeping debris out and giving…
As the Ferrari is quite heavy, I have reinforced this version. Set infill to 30% or more.
Plymouth Superbird Dodge Charger Daytona Wall Art
Welcome to The Low Poly Auto Show! This is a Shelby Daytona Coupe. Print this model with NO SUPPORTS. Details/fit may not print as intended if the print is scaled down. Each model is designed to fit wheels without bearings and wheels with…
Material: TPU 90-95A Nozzle: 0.4mm Layer Height: 0.16mm(will give best results for Fillet Radius on bottom) Line Width: 0.5mm for all Print in all walls for best result, can be printed in 10+ walls and around 80%infill as well. have had…
Welcome to The Low Poly Auto Show! This is a Dodge Charger Daytona from 1969. Print this model with NO SUPPORTS if your bridging skills are up to the task. Details/fit may not print as intended if the print is scaled down. Each remastered…
This is used as a pad for a Daytona jack. Measure the top of your jack as it doesn't work with my other jacks. Just wanted something better than a 2"x4" and this fits nice and snug. I used PETG at first but that dented poorly from the…
I have a 2004 Triumph Daytona 600. I needed to fit a FRONT brake guard so I can take it on the track. I bought several CLIP ONs but they are all 22mm. My original bar ends are 27mm. Rather than mill the original down I created these 27mm…
