31 models
update 2. Nov 2022 Different heights of the big shoulder of the pulleys from different vendors. forced me to make different versions of the L mount. So measure your pulley and chose the correct mount. and R mount is corrected by 0.2 BOM 1…
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
This is a Z-axis leadscrew decoupler designed for a TR8 leadscrew. It decouples the XY plane from the leadscrew. The design is similar to an Oldham decoupler, but uses a dovetail to keep the parts together. It's compatible with the Rat…
Reduce VFA, make it smoother, quieter, and more sturdy- get rid of the risk of curving the step shaft due to running at high acceleration for a long time. ATTENTION : This MOD is made for original A/B drive, not tested for compatibility…
Hello, this is my first model. Didn't like idea to use metal M3 screw (and I don't have one) so I created some kind of retainer from plastic instead. Works with original model (attached into my STL, all credits to Robert Samples), snaps…
New update: added Open Front/Enclosure 2 rear XY motor cage tops and front XY motor cages New update: Changed the rear XY motor cage tops, and no bottoms are needed. In this change, the rear XY drive pulleys are visible and it's easier to…
Small decoupler for model railroad, works for all Märklin couplings. Settings used: Printer brand: BambuLab Printer A1 Mini Layer height: 0.2mm Supports: none Adhesion: no matter Show me your results in the makes!
Hi, It seems that I got lead screw that it not 100% perfect and I was experienced errors in prints related to Z wobble that Official TR8*4 Anti-Backlash Nut Block could not solve. After tightening official Anti-Backlash Nut Block issue…
Stepper decoupler for Nema17 motors. It supports high end D26 L35 disc decoupler. Bolts/Nuts version. No supports needed. Compatible with standard motor shock absorbers. Use of a top shaft decoupling bracket is mandatory! Ratrig…
The 4010 fan is very loud on the Sovol SV08 because it is screwed directly onto the metal plate and transmits the vibrations to the plate. This causes the loud humming. You can simply decouple the fan with this TPU ring; however, I also…
This decoupler is meant to reduce Z wobble. It is based on the design from the HevORT as seen in this Video: https://www.youtube.com/watch?v=mqSQhwqSzvg Print instructions I printed the parts in PETG with a 0.6mm nozzle, 0.24mm layer…
Call it “only preference” if you wish but I must say I never liked how VCore centerfold pulley on one of motor and pushing with enormous force to motor first bearing. So I made one XY Motor block that places pulley between two bearings…
( Full video ) I added tons of weight to my printer rack, but the X1C still shook everything when fully going at it. Printing on the prusa mini standing one shelf above was not possible while the X1C was running. Decided to give the good…
Unlike the other mods out there, this does not require a full rebuild and new motor cage etc. the pomnut is inserted upside down, this results in a limited DoF in the y-axis but it should still be enough. it also integrates 3 holes to…
The mainboard fan is annoyingly noisy on the SV08 (not to mention the other fans, but a different topic), so I installed a quiet fan with a buck converter and hoping the best, but it did not change dramatically. I was searching for the…
Print setup is same as any othe RatRig printed component. ;)
The model was originally based on an idea from DJ-Designs, but I wanted to add an extra top bearing to remove the axle arm. The model uses 695zz bearings, as do all V-Core idler pulleys. I also attach 2 versions of the bottom part, one…
!!! The BEARING SEATING is at 22.1mm, it is recomended to print a fitting test before!!! ONLY FOR 20TOOTH PULLEYS, NOT STOCK ONES BOM for each of the towers: top to base: 3 M6X25 Screws ; 3 M6 heat inserts motor to stock support: 4…
Before printing, I recommned print the reference threads first and check if it works for your spa. The port, as measured — verify yours before printing feature value major Ø, across crests 34.2 mm pitch 2.1167 mm = 12 TPI (25.4 ⁄ 12)…
Bracket that allows Z-screw nut to be adjusted in X and Y directions. Works with stock nut or Anti-Backlash replacement. Locked-Down: Print the bracket and 2mm washer. Slippery X: Print in PETG for less friction. Sand contact surfaces. If…
Can be printed in any suitable material such as PLA or PETG. I printed The inner part with PETG and the outer part with PLA. Supports are needed. I used PETG breakaway supports for the PLA and vice versa. A rubber band is needed for the…
This remix has no compensation in X-Direction and in rotation around the Y Axis. There is only 2 ways to use this element: - Use a fixed coupling: Only lightly screw the motor onto the fixture, fix the fixture to the frame, then fix the…
This is just a kinda simple decoupler tool. Slide the tool where open end of operating pin and move tool backwards towards rear cars. Helped my kid decouple train cars easier. Works pretty well. Work for Lionel HO scale trains… Printed at…
Description This is a simple tool that is essentially a mini clamp/vise to press PTFE fittings on couplers open so that it is easier to remove tubing. Sometimes it can get quite difficult to remove PTFE tubing from couplers, as you have…
Before printing an adapter, print the CAP first and check that it runs onto your spa. It is the only part here that has been fitted to a real tub, every other part carries the identical thread, and it is the cheapest way to find out that…
Remixed DuTrident for a large custom build to use 40T pulley, Thrust Bearing, F/688ZZ bearing. F688ZZ should pressfit into bottom of the mounts. Thrust bearing should sit in the top. 40T pulley resting on the thrust bearing. 688ZZ bearing…
this model uses two interlocking A brackets coupled with a string through a center hole to allow the printer to "jiggle" freely, the model includes brackets to affix to aluminum extrusion and additional brackets to tape to a table,…
An ultra-low-noise timegrapher stand engineered to outperform commercial clip-on microphones. By isolating the measurement cell within a floating TPU Gyroid sandwich and transferring acoustic impulses directly through an adjustable M3…
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
Call it “only preference” if you wish but I must say I never liked how VCore centerfold pulley on one of motor and pushing with enormous force to motor first bearing. So I made one XY Motor block that places pulley between two bearings…
The ICY BOX 3.5" Hard Drive Decoupler is an innovative 3D-printable vibration isolation solution for mounting 3.5" hard drives in external ICY BOX enclosures without vibration transmission. This project provides STL files for 3D-printed…
