Counting matching models…
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
Drag the files in as 1 object and color as you wish. You can even do this with a basic single extruder style printer and just pause at a certain height and change to black filament to do his hat and eyes etc. Alternatively, you can print…
Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge. I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them: 2x M3 - 5mm Threaded inserts 2x M3 - 6'ish mm Bolts…
Thin defrost vent that will connect to a 2" vent hose. i used this to install a defrost vent in my Honda Pioneer 520. Very similar to the vents that come with the inferno heater for the honda 520. The STL includes lower vent adapter,…
These scans can replace the stock interior door card defrost vents on either door, that are subject to cracking and breaking over the years. This part is impossible to find nowadays. Thanks to Seven!!…
The door defrost vent bezel on mk3 supras is a commonly cracked or broken piece because it is originally ABS and exposed to a lot of sunshine and heat cycling. This is a piece modeled after the original. I haven't been able to find a part…
For scratch away the ice on your car
The narrow rectangular hood vent behind the windshield for a Yamaha Enticer 340 (ET340). Replacement for Yamaha P/N: 8J4-77109-00-00 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category:…
For the dash vents. I suggest printing it side up with supports since the support side sits inside the dash anyway. Mirror it for the opposite side.
Remix of https://www.thingiverse.com/thing:4678040 I redesigned this based on the pattern called out in this video: https://www.youtube.com/watch?v=VL5mr9hXrm0 Print in ASA for UV stability. I printed on a CR-30 belt printer. For best…
The round windsheild defrost hood vent for a Yamha Enticer 340 (ET340). Replacement for Yamaha P/N: 8J9-77133-00-00 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Automotive
This is a direct copy from my clip from the middle of the two defrost vents, request on Facebook RX7 group. Made in Fusion 360. v2 has beefed up triangles to help the clips Untested on car
Replaces defroster vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components Printing PLA - If you are planning on running heat through the vents use a filament with higher temperature…
A slightly better version of the Defrosting Tool. I added car brand logos, so it is eg. the perfect present for a car enthusiast or a stylish helper in winter. I will add more brands soon. You can write me if you want a special on. Enjoy…
My "13" figures were jealous of my new Defrosting Hex Scraper ...so I decided to make them their own :) It is of course compatible with LUCKY 13 , MINI 13 , EASY 13 and DUMMY 13 . If you are interested in my original scraper, feel free to…
This is a vent valve plug for the Jeep Wrangler's dashboard, designed to help properly distribute air for defrosting the front windshield. Do not print with PLA! PLA will warp under heat. It works well with PETG.
Hello there, I have designed a Drill Powered Scraper, with CV Joint, for more pleasant use of outer motor An ideal machine for people who do not have much strength or time to scrape car windows Here is a new version of Scraping Machine:…
Extras used belong to other makers. These are the links: Ribbon https://www.thingiverse.com/thing:3084280 Button https://www.thingiverse.com/thing:9894/files Arms https://www.thingiverse.com/thing:1155600
fits 11-14 WRXs and some Subaru Foresters although im not sure which years. I designed it to hold the Equus 2 Inch Vacuum/Boost Gauge - 8257 from O'Reilly autoparts. This was a quick & dirty design, the vent mount doesn't connect to the…
A discontinued part for the Defrost system inside of roughly 10 Chrysler cars, I made it for a friend and have been told it works, hopefully it will helps keep a few cars alive alittle longer. I have included the SLDPRT incase the…
a small defroster made to use on your cars windows. you can keep it on your keychain, though i do reccomend taking it off of the keychain before use. I reccomend printing with at least 30% infill, as it will probably snap on anything…
replacement vents for the smaller defroster vents on the dashboard.
Print with animal/food safe materials! This defroster is a perfect way to defrost frozen fish food in an easy way. It can also we used as a slow feeder! It works best as a slow feeder if you have your water flow near it so water can move…
Replacement defroster vent for Winnebago RVs from the 1980’s and 1990’s.
A card scraper is a simple yet effective tool for removing ice or frost from your car’s windshield. While it’s not specifically designed for this purpose, it can be quite handy in a pinch. Here’s how it works: “YOU CAN USE THIS TOOL TO…
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
You are welcome to use it Not just for Citroen owners
UPDATE 2026: NEW version added that integrates both the button faces and clear backing parts together for those with multi material printers! The Bezel buttons on the Honda del sol are well known to fade really badly over time, I created…
Rear Windshield Heating Wire Protector Cover Trim for Ford Bronco & Bronco Sport Protect the fragile rear windshield defroster wire connectors on your Ford Bronco or Ford Bronco Sport with this simple, low-profile 3D printable cover.…
this is a water diffuser. fill a bottle with lukewarm water and twist it on then you can pour it over your car window and it's unfrosted. just make sure you turn your wiper on right away otherwise it will freeze right back on. and don't…
This model can be print on prusa mini as well.
The Scraper That Defrosts Without Frostbite (or Frustration) Presentation: Forget screwdrivers, butter knives, or whatever desperate tools you’ve used to battle freezer frost. Meet GrattoCool , a 3D-printed scraper designed to bring peace…
replacement large defrost grills that mount in the dash board.
This 5 IN 1 model has: A hexagonal scraper handle 3 print scraper blades to scrape prints off of your 3d printer's bed 3 car defroster blades to defrost your car's window 2 different types of scratching blades A storage tray to store all…
The VOM dogfood sausage holder is for defrosting the sausage overnight in the fridge. This helps to minimize the space that is taken in the fridge, while also collection all the condens. No supports needed. Size: LxWxH = 200 x 65 x 34 mm…
Put boiling water into it, print with no supports in ABS, handle will thread into the scraper. print at 100% infill print with supports
round car defroster with handle, print with high infill and strong material as abs or petg
I see this has been made few times by other people but there are a couple of features on some models that were left out that I took care of. This model does have the light and direction indicator. this model also has the locator nub on…
If like me you have a fridge that doesnt defrost itself, ice builds up. so switch the fridge off every so often and the ice melts. but under the fridge there is a flood of icy water. You need a fridge water drain that can take the…
This is a easy to use kit for defrosting your cars. It has all the things you will ever need for defrosting cars. It comes with 2 attachments, 1 is a ice scraper and the other is a snow broom. It also comes with a extendable handle to get…
Simple defrost scraper. When printing make it as strong as possible - high infil, high resolution etc. Print takes around 2-5h depending on the infil and resolution. (PLEASE LET ME KNOW IF SOMETHING DOESN'T WORK AND POST SOME MAKES)
Instead of scraping the ice off your windscreen and/or paintwork. This design lends itself to the recent(ish) viral hack of using a ziplock bag filled with warm water to melt the ice in cold weather. Why not just use a ziplock bag then?…
Easy to print, but there is a fragile part - there are two beams under the finger holes, which are prone to damage if used incorrectly. They are supposed to make it possible to slide on the glass and make the defrostation easy! Post a…
This is a model of a snowflake-shaped scratcher
This is a car defrosting with a hexagonal pattern. The model file comes with the scraper, 3 blades with notches, and a storage area for extra blades. If you print this, please let me know what your settings were and how well the model…
Replacement for the front windshield defroster on the DAF YA66 Dutch military courier car.
Print Settings Printer brand: Easy Threed Printer: X7 Rafts: No Supports: Yes Resolution: 0.20 Infill: 50% Filament brand: polymaker Filament color: Black Filament material:PLA CF Note : I have not jet tested. I need to finish printing…
Just a big halfmoon like blade... I mean defroster for your car
i made it like this so when youre defrosting your car snow and ice wouldnt get to your hand
This model is mainly thought of because my car defroster stopped working and the windshield would be foggy. So this was created to stop that. The design is made to push air towards the top of the blower to the windshield. I printed…
The Triangle has a site length of 10cm
This is a multifunctional model. You can use it as a icescraper / defroster or just as a winter decoration. I made two star version. You can also choose a variant without the holde in the mid: I printed this with silk silver PLA on my…
A very simple and easy to print model for emergency situations
I will sometimes put meat in my microwave to defrost during the day since I can't leave it on the counter with my pets, so I made this magnet to not forget. Takes two 6mm diameter/3 mm height magnets. I did a simple color change on the…
This is my 3D model of ice scraper – car defrosting tool. Feel free to download, print and use!
Plug to replace the rear window defroster switch on a 1979 Camaro Berlinetta. Ours was broken so I made this plug to cover where the original switch was. You will need the original clip to secure this to the dash. I've only tested this on…
Simple adapter for Old Air Products to allow 2 connections into the rectangular Defrost vent. I used the Stapes to hold it in place, it fit under the 2 on the long side, and sits on top on the 2 on the short side. It also fits very snug…
Simple tool designed to fit between standard freezer grids as seen in pictures Speeds up freezer defrosting by removing ice from freezer grids and by scratching snow-like ice
A small contribution to the scarcity of Full size Jeep Wagoneer and truck parts.
place on food you are defrosting 4mm tall simple sign yum yum can help with cad work if you like
lock defroster holder, glued with tape for 35mm-45mm bottles
MGB Heater and Defrost Knob for 1971-1976 One of the knobs on my MGB stripped out and would no longer turn the control. I designed this knob based off of the original and it mounts and releases in exactly the same way. Printing: I don't…
Defrost vents for 1st gen S-10 to use with 2" hose for Vintage Air units. Recommended material: ABS
This 5 IN 1 model has: A hexagonal scraper handle 3 print scraper blades to scrape prints off of your 3d printer's bed 3 car defroster blades to defrost your car's window 2 different types of scratching blades A storage tray to store all…
For the dash vents. I suggest printing it side up with supports since the support side sits inside the dash anyway. Mirror it for the opposite side.
Replaces defroster vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components Printing PLA - If you are planning on running heat through the vents use a filament with higher temperature…
Drag the files in as 1 object and color as you wish. You can even do this with a basic single extruder style printer and just pause at a certain height and change to black filament to do his hat and eyes etc. Alternatively, you can print…
I see this has been made few times by other people but there are a couple of features on some models that were left out that I took care of. This model does have the light and direction indicator. this model also has the locator nub on…
![[ 4 VERSIONS ] CREDIT CARD style car defroster](https://media.printables.com/media/prints/658977/images/5193162_e98ed101-568a-4565-8282-0c0276e22949_96304610-6ace-4255-ab60-fb3c435181f5/v11.jpg)
