1 / 5
Ford Bronco / Bronco Sport Rear Window Defroster Wire Connector Protector Cover — image 1
1 / 5

Ford Bronco / Bronco Sport Rear Window Defroster Wire Connector Protector Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Protects the rear window defroster wire connectors on Ford Bronco & Bronco Sport. No supports required.

Rating
0 / 5
Likes
4
Downloads
35
Makes
0
Views
207
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Rear Windshield Heating Wire Protector Cover Trim for Ford Bronco & Bronco Sport

Protect the fragile rear windshield defroster wire connectors on your Ford Bronco or Ford Bronco Sport with this simple, low-profile 3D printable cover.

These protective covers help shield the rear window heating wire connections from accidental bumps, cargo, pets, or cleaning tools that could damage the exposed terminals.

Features

  • Designed for Ford Bronco and Ford Bronco Sport

  • Protects the rear windshield defroster / heating wire connectors

  • Low-profile design that blends with the factory appearance

  • Easy installation using automotive double-sided tape

  • No permanent modifications required

Printing

  • Supports: Not required

  • Material: PETG recommended

  • Quantity: Print both mirrored parts (left and right)

While PLA may work, this area is exposed to direct sunlight and heat generated by the rear window defroster. For best long-term durability, PETG, ASA, or ABS are recommended.

Installation

  1. Print both mirrored pieces.

  2. Clean the glass around the defroster wire connectors.

  3. Apply automotive-grade double-sided tape to each cover.

  4. Position and press firmly over the wire connections.

If this model helps protect your Bronco, please consider leaving a like, posting a make, or sharing a photo of your installation!

Keywords: Ford Bronco, Bronco Sport, rear windshield, rear window, rear glass, defroster, defogger, heating wire, heater wire, connector protector, wire cover, trim, rear hatch, tailgate, 3D print, PETG.

Note: A fellow forum member asked for a rounded version, so I added one. I haven't tested it on my Bronco yet, so please use it with caution and let me know how it fits!

Tags