1 / 5
Ford Bronco / Bronco Sport Rear Window Defroster Wire Connector Protector Cover — zdjęcie 1
1 / 5

Ford Bronco / Bronco Sport Rear Window Defroster Wire Connector Protector Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protects the rear window defroster wire connectors on Ford Bronco & Bronco Sport. No supports required.

Ocena
0 / 5
Polubienia
4
Pobrania
33
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Rear Windshield Heating Wire Protector Cover Trim for Ford Bronco & Bronco Sport

Protect the fragile rear windshield defroster wire connectors on your Ford Bronco or Ford Bronco Sport with this simple, low-profile 3D printable cover.

These protective covers help shield the rear window heating wire connections from accidental bumps, cargo, pets, or cleaning tools that could damage the exposed terminals.

Features

  • Designed for Ford Bronco and Ford Bronco Sport

  • Protects the rear windshield defroster / heating wire connectors

  • Low-profile design that blends with the factory appearance

  • Easy installation using automotive double-sided tape

  • No permanent modifications required

Printing

  • Supports: Not required

  • Material: PETG recommended

  • Quantity: Print both mirrored parts (left and right)

While PLA may work, this area is exposed to direct sunlight and heat generated by the rear window defroster. For best long-term durability, PETG, ASA, or ABS are recommended.

Installation

  1. Print both mirrored pieces.

  2. Clean the glass around the defroster wire connectors.

  3. Apply automotive-grade double-sided tape to each cover.

  4. Position and press firmly over the wire connections.

If this model helps protect your Bronco, please consider leaving a like, posting a make, or sharing a photo of your installation!

Keywords: Ford Bronco, Bronco Sport, rear windshield, rear window, rear glass, defroster, defogger, heating wire, heater wire, connector protector, wire cover, trim, rear hatch, tailgate, 3D print, PETG.

Note: A fellow forum member asked for a rounded version, so I added one. I haven't tested it on my Bronco yet, so please use it with caution and let me know how it fits!

Tagi