Counting matching models…
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
The higher you print it, the heavier it gets! Test your bed adhesion with this. Play with your fan speeds, your heat settings... see what works! The higher it prints, the more it pulls on the bed. Measuring gauge on side in 25mm steps.…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
The Saeco Grand Aroma Deluxe Bean Hopper Extension is a special extension for the bean hopper of a Saeco coffee machine. This extension allows the user to increase the fill height of the bean hopper and thus add more beans. By using the…
Print approx. €24.38–€29.79 excl. taxPreliminary estimate for one variant
UPDATE 01.03.2022: Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt. Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität. Alternatively, for…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This has been what I needed for so long and I had yet to find one. Here it is, the final piece of the bathroom practicality puzzle. 3mf file made in PrusaSlicer with supports. Install with either double sided tape or 2 flathead screws for…
Print approx. €15.05–€18.39 excl. taxPreliminary estimate for one variant
Organizer for all player tokens and components. It fits very precisely to the original game organizer without a need of any additonal modifications. Make sure to sort the indurstry tokens before inserting them to this organizer. It speeds…
Print approx. €16.22–€19.83 excl. taxPreliminary estimate for one variant
This is your ticket to use your shopping cart and travel around. You can put the chip on your keychain, inside your pocket and so on. The shopping cart coin has the size of 1€. Just insert the coin into your shopping cart, release the…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
I needed a wall mount for the Meta Quest 3 controllers. I designed this one, a „deluxe version“, with some unnecessary decorations. It’s a game controller, isn’t it? - So it should look like one, too. I made another, simpler version…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
READ BEFORE PRINTING This print is for a very deluxe, very premium, Whatnot TCG display stand that has 3 positions to stop camera glare. Holds graded slabs, toploaders, packs and singles without a hitch. Makes selllers looks sleek and…
Print approx. €5.39–€6.58 excl. taxPreliminary estimate for one variant
Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €8.46–€10.33 excl. taxPreliminary estimate for PETGSource material: PET
Perfect fit for all automatics coffe machine, for cleaning coffee waste.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Adapters to use a HTC Vive deluxe audio strap on a Meta Quest 3 headset. Curved version (1.5) should be very close in fitment. However if you have issues printing them and rather use the flat version you can aswell, heat them so they are…
Needed a bracket holder for my NVMe M.2 on the Asus x99 Deluxe motherboard. Downloaded https://www.thingiverse.com/thing:2166807 and modified a bit. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution:…
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
IMPORTANT: A few people in the comments have mentioned that Mood made some changes to the trays in the second edition release. These organizers will sadly only fit in the v1 deluxe version of the game. First time upload, first time using…
Choose your favorite Element and print it out. No, not the Atom itself, but a bohr-model of the atom anyway. Feedback requested! Let me know if you are about to discover some new elements! I gladly extend my script with your new…
Keep your fancy new copy of RA all straight and tidy. When you first get the game, it looks like they just dropped bags of wood into a box. This gives it order, and we all know that Ra loves order. Step 1: Print out…
Lighting kits and labels are available on my Etsy store: https://charlesworthdynamics.etsy.com My original design, first published on Thingiverse in 2013. Charlesworth Dynamics is pleased to offer the TARDIS Deluxe Kit. I have yet to get…
Bottomless Tokens and Gnar Dog Tokens reduce air volume in your rear shock and create greater progression at the end of the shock's travel. Add or remove tokens to tune your shock's bottomless feel. Gnar Dog Tokens are equivalent to 2.5…
This is an over-engineered, sustainable drain cleaner. I wanted to create replaceable cleaning attachments and a comfortable handle. The handle consists of 2 halves, which are held together by 2 hexagonal connectors. The cleaning…
Update 03/24: While the original Version still holds up extremely well, I wanted to increase stability for the Front Wheels because there is quite some load on the original Wheel center rings. Those rings that come with the Kart are made…
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
You might be familiar with my original conversion . Well, I've since made a version that replaces the top cover of the camera with a custom 3D-printed design that allows clearance to eject Instax Wide the right way up. It even has…
I love this game. Top to bottom, from production quality to gameplay mechanisms to art, Andromeda's Edge is simply incredible. The only thing standing between me and constant replays? The setup and teardown. Edit : I was asked on discord…
Crafted specifically for 3D printing, my fan-designed Stargate Atlantis deluxe model brings the iconic sci-fi portal to life. Measuring over 27 inches (685mm) in width, the design showcases intricate detailing on both the front and back.…
Improved various parts of the holder. Most notably the fitment of the “bajonet” mount that attached the filament holder to the mount. And the holder itself has better bearing fitment. Also added a few bonus parts and removed the need of…
This is a remix of the one made by Sekazi. Its been modified to fit the quest 3. Ensure you print it standing up (default orientation of the model) with supports otherwise the clips will break. It is a bit of a squeeze to get it in place…
This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond Thank you @whinnyrab (RockyRob) for images and testing as I'm still waiting for my Beyond to be made. Thanks to @CompatibleVRC for helping me…
This is a stand for the tree pieces of the Kitchen Aid Pasta Maker Set 5KSMPRA. It holds both cutters, the main roller and the cleaning brush. The overall height with the tools inserted is around 26cm. A version for the “Deluxe Set” with…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 Hello, for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused…
A stackable storage solution for Marvel United Cardboard Locations & Villian Dashboards , as well as Plastic Tokens . Two sets (6 total boxes) can hold all the deluxe components from all 3 seasons. Add 6x3mm magnets to the box top & box…
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
This is an insert / organizer for the Teotihuacan Deluxe Master Set, including the fifth player expansion. It supports premium sleeves (Dragon Shield matte shown in the photos), vertical storage, has no lid lift, and was designed to aid…
Token for the rockshox super deluxe air shock. The standard size and 1.5x the standard size available. there is also a .step file in case you want to further customize it. MAKE SURE TO RESPECT THE MAX NUMBER OF TOKENS IN YOUR SHOCK! DO…
Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !
Raising Robots is a wonderfully crunchy phase selection and tableau-building game from Nauvoo Games. The deluxified version comes with brilliantly vibrant components and additional tiles associated with the different inventors available.…
Wanddicke 8 fach Düsengröße 0.4mm Layerhöhe 0.2mm Material PETG Drucker Bambu Lab P1P Druckzeit 21 min
Insert for Explorers of Navoria + Forgotten Lands Expansion + Deluxe Components + Card Trays! Card trays fit sleeved cards! The box currently closes almost flush, which is barely noticeable. Should be good for vertical storage. I use the…
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Infill: 15%
Astro Knights is a deck-building game similar to Aeon's End where you team up to take down a big bad boss. The recent Eternity expansion adds additional bosses, heroes, cards, and mechanisms, as well as more deluxe player boards. I wanted…
This inlay was inspired by the awesome one designed by tvkili and expands it to fit all the KS extras for the game. I basically remodeled some of the boxes and added a few new ones. Here's what you need to print: Money_Tray,…
This is an unofficial insert for Creature Caravan Deluxe Edition from Red Raven Games. There are two deck holders and two resource trays for easy access, with enough space to accommodate sleeved cards in the deck holder and deluxe +…
This is a full box organizer for the Essential Edition of the Marrakesh Board Game including the Deluxe Component Upgrade Pack (the box would fit for a game without the Deluxe Components EXCEPT for the city doors (you would probably have…
Brass Birmingham Deluxe Edition Insert - Streamlined Setup & Organization Designed for Efficiency, Convenience, and Style Introducing a custom-designed 3D print insert for the Brass Birmingham Deluxe Edition , created to optimize game…
I recently sleeved all of the standard sized cards for Dune Imperium and the expansions. I didn't like the way they fit in the Deluxe Box after that - too tight and the corners were bending. I made these holders to replace that long card…
Adds Point Token bank, Cover, and modifies player board tray to accommodate Non-Deluxe versions.
Note: this is NOT a “general purpose” organizer for Wonderlands War. It was specifically created to make room for my dual-layer laser cut acrylic overlays , which take up a LOT of space in the box. It also has room for the Shards of…
When Make Anything (Devin Montes) created Tippi Tree, I knew we had to add it to my wall of games. With all the pieces of the pieces needed to play, it definitely needs a containment system. There are a few ordinary boxes that have been…
There are three unique parts, each of which must be printed twice: ULock cylinder holder (2x) maintains spacing between cylinder and rack. It is intended to be relatively loose, as it only holds the cylinder in place while attaching the…
The original organizer took a lot of useful space, with so many cards and elements I decided to make my own organizer. Every card section fits cards with card sleeves (in my case that is Gamegenic 67 x 103mm card sleeves). Warning! Deluxe…
Made the printing surface smooth to minimize issues with first layer. Original author BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe…
EDIT: 7.9.2026: Due to some reports of production variances and meeple thickness etc - I am uploading today a modified version of the Player Board that went from a 6.2mm deep well to a 10mm deep well for the Hammers and Melody tokens as…
A functional model of the extraocular muscles of the human eye. Anatomically accurate insertion angles result in realistic pulling actions of the muscles. Developed to aid in the teaching and learning of the extraocular muscles. This…
Do you own a lasercutter/engraver with a chuc-style rotary device?? Then you need these multi-purpose gently jaws for clamping all your items. This design can grab up to Ø140mm, and you can design your own grippers for whatever you want.…
A replacement for the force track cube in Star wars deckbuilding card game.
The deluxe edition of Rebel Princess didn't fit sleeves. I used sleeve kings for this. It will also fit the promo princess. Thanks!
You might be familiar with my original conversion . This is an updated design to eject Instax Wide the right way up. It's also a little leaner. Framing is slightly off on this one too, as with the original, but you get used to it quickly.…
I created this version of the famous DEVO energy dome. I was not satisfied with any of the existing models available so I designed this one from scratch. It is designed specifically to be super easy to print, super easy to assemble, and…
The one piece box insert was too big for my printer bed, so I divided into quarters. Now I can print it! Category: Games
I last printed this a couple weeks ago for our last remaining hamster, Brownie. It was a bit of a tight fit for her and a small cloth (which my wife insisted on), and the hinge holes were on the small side. So this model has been scaled…
When people see my other designs, people can see I like the sliding lid design (a lot). Doesn't take a lot of space etc. What's not to like? I also like tvkili's design for the brass players. Therefore I decided to make a nice sliding lid…
Closing note If you like the little project a like and make will make me happy seing what i've done is not just for my crazzyness XD and actually helped the people.…
Insulated Cozy for the Ninja Creami Deluxe ice cream tubs. It is a tight fit, so if you have issues with tolerances, you might want to add a percentage on the size. Printed great on my Bambu..
A set of boxes sized to fit within the tray of the Deluxe and collector's edition of the game. (I have the collectors edition but from what I've seen the Deluxe edition's tray is the same size so all boxes should fit) I got annoyed by the…
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
2025-04-10 Update - Version 1.2 In response to several folks whose games have much thicker tokens than my game has, I have redesigned some parts of this insert to better accommodate these "thick tokens," as well as made some minor…
Just got Earthborn Rangers with the deluxe token set, but needed an additional set. tradenmyr made a great set over on Thingiverse , but the tokens were slightly smaller and didn't have the painting done so I've updated that here.…
This is a remix of the amazing Raising Robots Insert by Mike F. I loved many of his design choices and learned so much just from remixing his content. Thanks Mike!!! I used standard PLA and settings .4mm nozzle, .2mm layers 15% infill.…
The wildfire season in Oregon went from "hey it looks like we lucked out this year" to "who guessed apocalypse for 2020" in a shockingly short period of time. And as our air quality hit the lowest in recorded history I got to wondering…
This is a bracket for installing two 2.5" hard drives or solid state drives in to a single 3.5" hard drive bay. Optionally, it can be used to mount one 2.5" drive on top and a 60x60x10mm cooling fan below it. If you're only mounting one…
These deluxe resources replace the card board resources in the original game. This remix makes the milk tokens into a single piece for ease of printing. In the picture with all of the resources in an organizer: This is the super cool…
This is my remix of the @Pepe LePew remixed stand. Please note: My skills are very limited and this could probably have been done better but since I couldn't find what I wanted, I did it myself. This remix turns the stand into a deluxe…
Introducing the XTools M1 Laser Engraver Deluxe Accessory Kit – because upgrading your laser game should be as fun as a barrel of laser-engraved monkeys! 🚀 Unleash the Laser Beast! Feel the power in your hands with our specially designed…
FR Toutes les pièces imprimées en 3D pour vous construire un contrôleur paramétrable et disposant de très nombreuses fonctions. Des fichiers VCarve et graphiques sont aussi proposés pour réaliser la découpe des façades de ce contrôleur…
Huang is a great great game with high quality components but a poor storage solution. Therefore I wanted to make an insert to fit all the stuff into one box. I used the red box (deluxe miniatures), because it's a little bit bigger than…
The Teotihuacan Deluxe Master Set comes with an ok insert, but there are a couple of issues for me. The player pieces are hard to get just one player set out at a time The technology tiles slide all around The various bits that are not…
I made this for a YouTube/TikTok Video… But it actually is very useful. NO Assembly needed . Just print it standing upright. Maybe add a brim if you have adhesion problems. HOW TO USE? — Check out the YouTube Shorts video I linked below…
A partial organizer for Critter Kitchen Deluxe, providing a superior player tray, unified card tray, and two bins to hold miscellaneous pieces and keep things aligned in the box. This organizer was made due to frustration with the…
The water reservoir for used water on my coffee machine always got full pretty fast. I designed a bowl that fits the geometry of the tray and can be put under the spout. It catches the first and last rins the machine does after turning on…
ZA13-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA13-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side PCB.
A Deluxe audio strap top cable holder. It is a mix of the models https://www.thingiverse.com/thing:4407155 and https://www.thingiverse.com/thing:2798868 . All credit to their original creators. Print Settings Printer: Artillery X1 Rafts:…
A foot to hold your racing wheel in place on your desk. yes I'm aware the wheel comes with one but the one I found was essentially in a dumpster so it didn't have it
Welcome to the coziest real estate under the sea, where even Nemo leaves a deposit. This seashell cottage is a micro-villa featuring: a heart-shaped window for maximum “aww” ventilation, a starfish on the roof as its official five-star…
Wanted to make a simple insert for my deluxe copy of Zoo Vadis and this is what I came up with. I printed it with 3 wall loops to avoid infill there (2 mm walls). Infill is whatever, you could probably do 15%, I think I did 25%. I left a…
Radlands Boardgame Deluxe Edition Disk Holder
There are already some insert but none what meet my conditions at once - compatible with deluxe components, compatible with expansion, vertical storage compatible, … I created this one. You can use all boxes for playing, just take them…
Update 1:03-11-2026 Improved tolerances for ball joints and steering arms to reduce vibration Chassis inspired by classic RC cars from the 1940s and 50s. 81 printed pieces Assembled Size: Length: 452 mm Width: 190 mm Wheelbase: 288 mm…
I needed one so I modeled it up! There are two versions; one with a longer handle and one with a shorter handle that you could theoretically use while freezing your base at max capacity. The longer one (which I originally modeled) was…
This is a tension relief tool designed to help loosen tight and stiff muscles in the hips, back, and neck. The cushion should be printed in flexible filament. I used 20% honeycomb infill and 4-5 perimeters to ensure consistent cushioning…
One of the reservoir caps got lost in a move and it's easy to splash water or cleaning solution when using the carpet cleaner without it. I'm still very new at making anything and this was made using TinkerCAD. I'm pleased that it's…
Cable Clip for HTC Vive Deluxe Audio Strap designed for the Franken Quest to manage 2 cable sizes. 1 is 3.5mm (common size for USB C charging cables) and the other 6mm (used for aftermarket Oculus Link). I have now added another clip…
POOP CATCHER DELUXE After a long period of searching, I decided to create the best-looking and most useful poop catcher for the Bambu Lab printers by merging some of the ideas I found online. I wanted something with a good design that…
Holds the blades for the food processor of the Ninja Deluxe Kitchen System.
I'm prefer modular inserts with trays that can be removed and used on the Table for set up. I haven't checked to see if the upgrade will fit without changes.
Alt process printing often involves toning in extremely expensive precious metals like gold, platinum, and palladium. Using a flat bottom tray allows for the absolute minimum amount of liquid to be used for these steps, as trays with…
This is an insert / organizer for Food Chain Magnate Deluxe Edition (not the Special Edition with the minis) produced by Lucky Duck. It supports premium sleeves (photos show Gamegenic Prime sleeves), has no lid lift, and was designed to…
