Counting matching models…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
Derpy is a friendly yet slightly scary character from the movie KPop Demon Hunters. It is a big feline with blue fur and big yellow eyes. He seems to be obsessed with turning objects back in place when they get knocked down. Designed on…
Spiderschwein und Homer von Simpsons - Der Film. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 15% Material: PLA Brand: Eono Color: schwarz printed on Artillery Sidewinder X1
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Soldering is a many hands' job. Things to hold include: A soldering iron The PCB A component/tweezers Solder wire That is usually at least one thing too many for creatures that have on average less than two hands. Thus I bring you a…
This 3D model depicts an adorable tiger inspired by the K-Pop Demon Hunters theme. The figure features a stylized, cartoonish look with large eyes, a distinctive bird-like hat, and decorative details. The tiger sits in a dynamic pose,…
In this lovely variation of Derpy Cat , he is teleporting out of here, but he can't take his eyes out of something… I wonder what that is?? Designed to look like it is sinking into the surface it sits on. This is a remix utility model,…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
Derpy and Sussie Line Art This is a line art model featuring Derpy and Sussie. Uses about 55g of filament at the default size. Can be scaled down to fit an A1 mini or scaled up for larger printers. Make it as thick or thin as you want. I…
This is a lower profile mount for the v400 speederpad to mount to the chassis rather than on it's (actually really nice) stand. The bare, shaped mount ( V400 Attachment / Mod Starter ) to fit the chassis was by Trayal on Thingiverse:…
STL available. Paint it with your slicing software (no cms ams mm3u needed) Original drawing made by me! DOWNLOAD & LIKE if you want to support me <3 Thank you! Personal use only. Do not redistribute! It is absolutely not possible to…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
⚠ UPDATE ⚠ Following numerous feedbacks, I upgraded the upper and lower shell in a third version (Flsun Speeder Pad V3). In this version the tolerances are softer and reinforcements have been added to make the body more solid.…
This is a Crocs Charm of Gonpachiro Kamapoko. The one I printed I painted black on the top and sides Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Filament: Hatchbox ABS White Category:…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
After the success of Pikachonk, I give you Bulbaderp. Tried to model him as printer friendly as possible. Probably works best if you dial up the detail on your slicer, so his little scales are a bit more visible. Enjoy!
I like the original design but there was no tilt in the holder. Added about 10 deg tilt to the holder. Rounded the curves for the brackets that clip on to the V400 frame. Extended the portion of the bracket that has the dovetail receiver…
Spider-Pig, Does whatever A Spider-Pig does.
Connected, the latest animated film from Sony Pictures just debuted a trailer heavily featuring an adorably derpy pug named Monchi. So here is our STL version of Monchi! It does require a few supports. If you would like to help support…
I always thought that the Brio lifting bridge is built for letting trains go beneath it, once it is lifted. That was also one major reason I bought a 3D printer, actually. It's compatible with the "old" lifting bridge I played with when I…
This is made for the right shoulder
Add a ring or hole to turn it into something to hang :) NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not…
Ignis, The Scourge of Cinderpeak Forged in the volcanic depths beneath Cinderpeak, Ignis is more than a dragon — he is a cataclysm incarnate. His wings stretch wide like burning banners, his scales shimmer with infernal heat, and his roar…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
Aint he cute? Its derpy tiger, the model has been tested and printed and confirmed to work and print properly with minimal supports needed. Size up! The smaller the print the less successful of a change you will have to properly print the…
--- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and get the commercial license (or just type…
The original file is a speeder pad holder for FLSUN V400. All works well for the SuperRacer except the bracket for the printer side tower. The rest of the holder can be found here:…
0.20mm x 3 loop wall x 100% + tree support
The flux press is designed for spraying a diameter of approximately 18.5mm To assemble the flux press first connect the lever to the arm and then the main body to the arm. As a joint I glued shortened nails in the holes, to ensure the…
If you already have the SolderPipe by Plantago Labs, you only need to download the “ptfe solder tube holder” and “tube holder” files. The other files are unaltered from the original. Let's face it: The SolderPipe by PlantagoLabs was a…
Here is the file for Pugly the Derpy Pumpkin a fun little model for your Halloween decorations, I printed mine on the prusa mini with zero support and 5% infill. I hope you enjoy. and Happy Halloween Thanks Bugman If you like what I am…
" Blossom " embodies the quintessence of spring, a symbol of renewal and the ephemeral nature of life's most beautiful moments. As trees shake off the remnants of winter, their branches burgeon with delicate blossoms, transforming the…
Für ein Projekt habe ich die kostenlos erhältlichen Modelle Dennis und Fabienne mit einem Sockel versehen. Die Dateien sind bereits für 1 zu 4 Modelle skaliert. Für kleinere Modelle hab ich sie anschließend im slicen verkleinert. Für…
Forged from the molten plastic in Shindong, China now with a new look for "The Hypno Ring" now 3D printable for everyone to enjoy. (recommended to use supports if you wanna make it, flip it facing towards the camera and make it look up…
Derpy & Sussie Display! Great for desktop display, or child play. Please download and like it really means a lot to me. If you would like a commercial license, you must message me for the conditions.
Printed and confirmed to work, recommend drilling holes on the side you must mount this yourself i only supplies the file for the mask. Thank you!
6 color model. Requires a color change for tool 4 after the teeth are done printing so that the eyes can continue with the next color
eine einfach zu druckende Buchstütze...
NO-AI (HUMAN MADE). Original fan Art! The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not…
This design is intended for Flowers that have been in a pod with roughly the following dimensions: radius: 70mm; hight 140mm. I wanted to hang the flower as seen in one of the Pictures which is why i integrated irrigation so I don't drown…
A fun, pumpkin-sized bucket based on the Derpy Tiger from K-Pop Demon Hunters . I printed three for my daughter and her friends, who are dressing up as Huntrix this Halloween. The handle also features inset logos from the movie for an…
The head is attached to an inner support. Just gently rotate the head to break the support. 3mf included for multimaterial four color print.
This is a lightsaber hilt and chassis that I designed for my kids. The body is designed so that it fits the "scrap" pieces sold at Disneyland and Disneyworld at Star Wars Traders & Tattooine Traders respectively. I wanted something that…
Derpy Chicken Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check out…
NO-AI (HUMAN MADE) Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free,…
Heyho You can install the part to get more comfort or to attach it in places that were previously not possible. In addition you can use cable ties to give the part additional support. Scaling Scaling is a very important factor with this…
I needed a speeder pad holder that would fit my needs so i designed one about 3 months ago and have been using it since, no problems with overheating like some other deisgns seems to have caused for people. nothing special but works…
An entrance for a underpass. roughly H0 scale. Any filament should work, supports required
Just silly little critters I'm creating while starting to learn nomad sculpt
Original Drawing made by me (Artist accounts: Tasty Voxels, AleL, CrealiTale Design) Do not re-upload this file online. Personal Use only! Download and like if you want new free projects like this!
A cookies cutter for your kids: put some awesomeness in your breakfast… Enjoy!
Schuhe in PLA oder PETG mit 20% Infill. Zur besseren Stabilität mit 3 Außenkonturen.
Universal mounting bracket for the pillar. Included plate for relocating extruder from top to pillar. Designed for M4x20 Countersunk bolt and nut for the mount and extruderplate. Other tools will depend on thickness. Extruderplate uses…
🐱 Derpy Cat Keychain – KPOP Demon Hunters If you’ve watched KPOP Demon Hunters , you know this little guy 🐾 My kids and I loved the movie (and the soundtrack), so I made this Derpy keychain for them! Now you can print your own. Available…
simple print (single piece) shell for the wonderphone (headphone jack extension for the Wonderswan). This was made mostly for aesthetic reasons, it's not the greatest to support while holding it, so please don't put too much strain on it…
I bought an enclosure for my 3d printer on amazon (Enclosure Name: Creality Enderplus 3D Printer Enclosure 550mm x 650mm x 750mm ) . This enclosure fits perfectly my Neptune 4 Pro and I decided to design a filtration block for it to…
If you already have the SolderPipe by Plantago Labs, you only need to download the “Pipev2” and “Solderpipebase” files. The other files are unaltered from the original. Pros: Feeding solder is easier on the fingers Extended sections give…
EN Underpot designed for D.150mm Pots You can scale as you prefere to get an undeerpot customized for all your pots
If you already have the SolderPipe by Plantago Labs, you only need to download the “Baseplate,” “Slideplate” and “PTFE Pipe” files. The other files are unaltered from the original. This model prints without supports. I was rather pleased…
SolderPipe Without glove the roller stained with hot glue
NO-AI (HUMAN MADE) Paint supports (critical areas only) Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other…
In the file Kalender-Nederlands-Definitief.3mf all pieces are present on 3 printbeds and ready for printing. This file is made for the Bambulab X1C
A cookies cutter for your kids: put some awesomeness in your breakfast… tra-la-laaa!
Besser Stand im Vergleich zu den weichen Originalfüssen. Gedruckt mit 4 Wänden, 5 top und bottom layern, Infill 20% Replacement foot for Prym tailor's dummy/tailor's bust Better stance compared to the soft original feet. Printed with 4…
This is a cone for hockey practice. it has some small holes to put screws through so it won't slide around on the ice. The gap at the top is to hold a hockey stick or a piece of ½ pvc pipe. if you put a stick on two of the cones then it…
This is a work in progress So I made this model, to try to improve the solderpipe. I thought the solderpipe was a great idea, but it was just to hard to dispense the solder. For me this remix works quite well but it has some flaws. I plan…
Gedruckt in PLA+ schwarz, Layerhöhe 0,2mm. Kein Brim, keine Supports erforderlich. Zur Befestigung werden jeweils sieben Stück Messing-Gewindeeinsätze M4x8,1x6,3 sowie Tellerkopfschrauben M4x12 benötigt.
Underplates for your home or weddings I printed in ABS 3 different options are available
A cookies cutter for your kids: put some awesomeness in your breakfast… tra-la-laaa!
STL available. Paint it with your slicing software (no cms ams mm3u needed) DOWNLOAD & LIKE if you want to support me <3 Original Drawing made by me (Artist accounts: Tasty Voxels, AleL, CrealiTale Design) Do not re-upload this file…
Ich habe die Größe angepasst, so passen die 330mm x10mm Schleifbänder des Proxxon BS/A 29810 Bandschleifers
This is a print in place it doesn't require supports
Simple Mount that uses a M10 Threaded rod to link Virpil Rudder pedals to a chair with rollers that have a Footprint of 70x55mm. BOM: M10 Threaded rod 1000mm (common length) and cut to size depending on the prefered position of the pedals…
Info: bei 100% Druckgrösse ist die Kontur recht dünn! Wenn möglich grösser drucken. Am Bild zu sehen sind 100% gedruckt mit Ender 3. Spiderschwein von Simpsons - Der Film. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4…
Meet Derpy the Tiger, the happiest little troublemaker—big round belly, tiny ears, paws in the air, and an oversized smile packed with teeth.
Derpy tiger from k-pop demon hunters no AMS or MMU needed
small jigsaw puzzle of the mountains near vanderpool
Needed more characters for Five Klicks From The Zone, so I made this fellow. He's the first of a series of Warboys I'm planning on making. Supports are needed when printing, and probably a raft too. If you haven't heard of Five Klicks…
4 sizes provided: 13cm, 14cm, 15cm and 16cm. All of them are 5cm deep. Let me know if you want a custom size. Fuzzy skin was used in the pics, the model itself is smooth. The pics feature the 16cm version with a 16,5cm diameter plate.
A case for a Fysetc Spyder v2 and Raspberry Pi 3B case with 4010 cooling fans.
The source marked this model as adult content.
The source marked this model as adult content.
Original by Justin Stoner ! Could also be used as a stamp, if you mirror it while printing. PRINT SETTINGS Printer: Flashforge Adventurer 5M Layer Height: 0.2mm Filament: PLA Infill: 100% No Supports, Rafts or Brims needed!
Another War Boy from the wasteland! If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my 3D printable releases are printed before release to…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there ! I spend too much time drawing Derpemon (Derp pokemon), and thought I'd put together some little paperclips. These are…
J’ai conçu une jolie boîte pour vous permettre de ranger votre fer à souder. LeaderPro FSK-1020 80W, je me suis basé sur ce modèle pour la création de la box. J’ai ajouté une installation sur le couvercle pour ranger toutes les têtes de…
I would appreciate a like
A derpy little octopus you can paint how you want If you use .stl lower him alittle into build plate so the tentacles print flat
hold two solder paste with a diameter of 56mm
Hi, here i have a design for an anycubic kobra go/neo, theres another one for the other side, maybe look at that too. I would apprechiate a like!
this is a small retainer, that keeps sliding things from sliding. The ‘eyes’ are for longitudinal adjustment. you will need 2x 3mm woodscrews for each piece. Either print left or right, or both for your project. Works with ABS. PLA might…
Speederpad mount with a slight angle
