1,037 models
D: elliptische Schüssel mit großem Fassungsvermögen Höhe: 80mm Länge: 220mm Breite: 160mm E: elliptical bowl with large capacity Height: 80mm Length: 220mm Width: 160mm
Print approx. €14.73–€18.00 excl. taxPreliminary estimate for one variant
Hi, i designed a very strong hook to mount to a wall to hang my extention power cable. The holes are designed for drywall screws with 5mm diameter and a 10mm head.
Print approx. €6.34–€7.75 excl. taxPreliminary estimate for PETGSource material: PET
Here is a watering can I designed in Fusion 360. It is designed specifically for 3D Printing as it has no angles over 45 degrees. The handle has also been taken into consideration as it would not be easily 3d printable so I decided to…
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
This is my first print share, so I'm new to 3D print. I wanted to print some useful holders for my pegboard from the Czech company Mars Svratka https://mars-svratka.cz/produkt/nastenny-panel-30 I was searching for the Internet, but almost…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
My band clamps had no home, so I created this holder to store them compactly on the wall. While this design is made for the Bessey BAN 700 band clamp, it should be easily adjusted for similar clamps (if there are any). How to Print this…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for PETGSource material: PET
Based on the Standalone Touch ID Module by SnazzyLabs , this new version of a Standalone Touch ID Module provides a multitude of improvements. TODO: Add more pictures of assembly Add clear instructions around battery connection and…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Update 11/5/2022 Added "round three fingers", "round four fingers", and "round five fingers". These are not parametric, but they are now easier to grip and less slippery, so I consider these models to be the final form. 「round three…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
The dish drainer can be found here: https://www.ikea.com/ca/en/p/rinnig-dish-drainer-double-sided-10387261/ Cheese-themed, you may use this in any scenario to provide a 30 ° slope to objects. Some ridges can match a rail system to provide…
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for one variant
The DUMB Wallet – D esigned U sing M inimal B ullshit It’s stupid simple. Like, really stupid... No sliders, no screws, no elastics, no levers and shit—just exactly what it needs to be. It holds your cards. It holds them really well. But…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Modern designed self watering succulent planter with water chamber. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion…
READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…
Outside dimensions of the model: The holes are 6mm x 11mm This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print…
17.02.25: New added model in files: Drainage Container - Just put it under the sponge holder (see pictures!) Say goodbye to messy countertops with this modern-designed sponge holder! Featuring a unique honeycomb base, it allows your…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
Upgrade your table setup with this Modern Minimalistic Designed Cup Coaster with Holder . The sleek and elegant design not only protects your surfaces from heat and moisture but also adds a refined aesthetic to any setting. The coasters…
Modern designer tray with an integrated relief of the continents. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360…
Rolling Paper Bench Stand ***Update - Two new versions have been added! There are now three bench designs, the Rocking Bench, the Arm-Rest Bench, and the OG Paper Bench. Try them out and let me know what you think!*** These 3D-printed…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
Very nice and detailed holder for pens, fountain pens or brushes. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes…
I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…
A great, minimalist interpretation of a bear. It appears strong, thoughtful, perhaps even pensive? This sculpture gives the bear a very special touch with its minimalist, curved lines. The standard dimensions are 200 mm x 151 mm x 97 mm…
I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…
Ever since stumbling upon buckle designs made specifically for 3D printing I kinda got stuck on the idea of developing my own. So this is my first official attempt ;) All parts are designed to be printed without supports. You can mix any…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
For my entry to the PrusaPrinters button contest, I decided that I would make my entry entirely within PrusaSlicer. Using the built-in shapes, I was able to make 7 different buttons featuring different holes, colors and even made one that…
About the Projec t This project was inspired by the side tables from the RIO collection (by Morgan Furniture), which used 3D printed parts created by algorithmic design tools. They have a distinctly organic feel, yet they are purely…
2 rings i designed and sharing with you :) Size 9, you can scale it to your size!
These containers are nice for a fun puzzle geocache, but oftentimes they are just as hard to reset as they are to open. I made this in an attempt to fix that! To open it, you have to normally solve one of these puzzles. It takes about a…
Simple little plug for the grip of the Glock 43x. Not much to it. Just follow the instructions. How Too. Print, in PETG, but pay attention to the way it sits on the print table in your slicers. You must help it. Look at photo. It should…
This vase was designed to be used to display the completed LEGO Cherry blossom set , though certainly could be used for “real” flowers or other artificial blooms. Two versions are available: A version to be printed in spiral vase mode.…
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
I designed this Colt 1911 replica that is roughly the correct size if you like this please give it a like! EDIT_1: VERSION 22 is much better! it has thicker scales, and other small improvements. This prints well with if you turn it so it…
You may also be interested in my Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides NOTE: There is now a new counterpart to this one that enables capturing dust that escapes out the bottom. Get…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
A while back I was hired by Adam Savage to 3D model a small robot that he designed. We printed the parts out and put them all together in a Tested video. Now you can download those files and print a copy for yourself! I filmed an assembly…
Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…
Walls and infill % depends on your material and requirements. Mine in the photo is printed in PLA, 0.4mm nozzle, 4 top, 4 bottom, 3 walls, 15% triangular infill. Corner brace designed with the advantages and disadvantages of 3D printing…
Another quick design thrown together in PrusaSliceer without use of a traditional CAD app to hold wires and PTFE on the MINI and other printers. I'm sure it can be scaled and used elsewhere. It makes working on the wire wrap and PTFE tube…
A selection of files to make a 3 way desktop box for the Make Noise Strega. You will need a piece of M8 (8mm) threaded bar to join the sections together and some 3mm bolts to hold the front plates on. To attach the handle I suggest using…
Case I designed to fit my Moondrop Chu IEM headphones. Could fit other headphones so long as the earpiece is smaller than 24 x 20 mm. I printed both standing on end to use minimal supports on the inner case and none on the outer.
Upgrade your bathroom with this modern-designed minimalistic soap holder ! Featuring a sleek rectangular shape, this holder is designed to keep your soap dry and fresh. The integrated drainage slots allow excess water to flow away,…
The Modern Designed Minimalistic Pen Holder is a versatile and stylish accessory, featuring a geometric design that suits any modern workspace or home decor. It can be used not only as a pen holder but also as a small flower vase, adding…
I recently bought a lot of IKEA BESTÅ furniture and wanted to try printing the feet myself. Then found someone using the original included feet as an adapter. Using this technique I printed a simple foot and it worked quite well. Then I…
I really liked the original concept but wanted shorter brackets that fit 6 gauge screws well so I modeled one from scratch. Also made a 3-panel corner bracket (otherwise you'd need 3 of the 2-panel brackets to achieve the same thing).…
My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…
This fills in the rear sight dovetail on Gen 5 MOS Glocks. I run full-size RDO on my full-size Glocks and I do not utilize a cowitness for competition shooting. I find the stock rear sight white box to be distracting in this…
Upgrade your table setup with this Modern Minimalistic Designed Quadratic Cup Coaster with Holder . The sleek, square design not only protects your surfaces from heat and moisture but also adds a refined touch to any modern home or…
This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…
If you wish to hang your MacBook or any other laptop on the wall with the help of Ikea Skadis system like me, then this is the must-have accessory. This bracket helps you to hang a laptop onto your Ikea Skadis board, with no waggling in…
Printable without supports.
Features Magnetic Modularity – Each tray uses 4× 6×3mm magnets (not included) to snap securely together. Build the layout you need—line them up, cluster them, or expand as your game demands. Sleeve-Friendly Fit – Sized to hold sleeved or…
This launch tower is my own original design meant to replicate the real SLS launch tower. This was designed to accept the Kmobrain SLS rocket model printed at 150% scale as a drop-in on the base. The segments are all designed to press…
NOTE: There is now a new, updated version of this: LowRider v3 CNC - Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc This is a remix of several prior iterations — originally designed for LowRider 2, now…
Remix to include the #757CARES logo
WELCOME TO THE PARTY PALS!" I designed this X-Mas Tree Topper in tribute to one of the GREATEST Christmas movies of all time! Yes, DIE HARD is a Christmas movie!!! It's a super easy project. and yes, there may be some Nakatomi Towers out…
A headphone stand designed because other stands tend to stretch out my AirPods Max headband which was annoying!! This stand is designed such that the frame sits on the stand and the mesh only gently touches the stand. Print with 20-30 ++…
This is a well designed watering helper for plants. It comes with different watering pipes, to adust for you're plant. the pipes have different diameters (from 0,4 mm to 1,4 mm) the pipes are screwed to the cap and water tight no support…
Quickly threw this together at the request of my nephew for his car - concept and size roughly based on a few examples I saw on the market, exact angles and dimensions down to your own needs … made it parametric so he, and now you can mod…
Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…
Brain Teaser Puzzle Box - Designed for 3D Printers A confusing little box, that you can't open, but you can, but you can't open it, but you can open it. The inner box closes flush with the outer box making seem impossible to open without…
Case for Wemos 18650 charge circuit shield (link below). https://www.aliexpress.com/item/4000957793394.html I used Mrlnka's "Wemos 18650 Charge Shield / Holder Dimension Model" to design this case.…
Made this because I was frustrated by bottles constantly falling after doing the dishes. This way they can drip all they want without the risk of falling. And they're quickly put aside for when you need some extra room Designed for the…
I have designed and remixed lot of custom parts for my Tiny-M printer. Most notable ones are: Tophat Skirt for V0 display Nozzle brush with purge bucket held on magnets Custom bed mounts to accomodate Mini Stealth toolhead without lost Z…
After cleaning our leather table/place/dinner mats I don't like to dry them right away, so I wanted some rack to let them drip dry. The idea was to make it easily expendable, just print another pillar and to connector parts and you can…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
Simple pot that I designed that is meant to perfectly fit the dirt base of ForgeCore Monsterra. It is printed with PLA, 0.2 mm layer height, cubic adaptive infill @ 15%. I do a layer change at the groove toward the bottom.
Description: This is my fifth “NX” project (after ProtoXtruderNX , AeroXtruderNX , AeroHGXtruderNX , TitanHGXtruderNX ) adapting the HGXlite drive and a lever inspired by the NEXTRUDER from @Prusa3D . Although I designed and printed the…
Linear Table Designed for smart reloader 3000 shooting front rest but could have other uses. 100% would be better milled, but use the tools you have! There are a couple of different base options : one is the one with clips designed to…
To create an involute gear we only need three parameters, the module which determines the length of the teeth, the number of teeth and the pressure angle. With these parameters we can determine the Pitch Circle, Addendum Circle or Top…
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
So, when the bin you've been using for the last several years gets tossed because it was empty and batteries no longer come in plastic containers anymore you need to solve the problem as you don't want to change your habits. Result: I…
I created a base for a vintage sewing machine (designed for a Pfaff 262) so that I can put the flat bed sewing machine on my desk. This is a very improvised design, not a lot of though went into it. Materials required: Silicone pads for…
The same function as the design 'Prusa Core One / + / L - Advanced Filtration v2' by Favon The new version (V2) has larger valves and fits on the CORE One, Core One+ and CORE One L and M3 inserts are optional. Version 2a has a more stable…
A PC Stand for the framework 16
https://www.youtube.com/watch?v=NdAL\_0wTLdc I designed this portable Wii some time ago and thought about sharing it with the world. There is no point in keeping it for myself any more :) All the parts I used are in the download folder.…
Tricycle Triumph TR2 (5e of 5 models) Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
This beautiful gray designer vase stands out with its textured, geometric surface. The quadratic pattern creates a dynamic visual effect, combining modern minimalism with a bold, structured design. Ideal for contemporary interiors, this…
This discrete stand is made to accommodate a 26mm lamp socket. Printing: print moon-globe-base print moon-globe-base-center-26.2mm print 3 x moon-globe-base-leg Assemble and use a drop of CA glue Feel free to contact me if you need…
This design is based on the concept and dimensions from #216223. The original model had 10 digits and 25 detent positions. That made it impossible for the digits to consistently align with the window. I had posted a hybrid STL+SCAD repair…
This is a basic handle with small detents that are sized to accommodate 3M Command Strips (Small/Poster Size). I made two variations with the only difference being the direction the removal tabs from the Command Strips will be exposed. In…
Solid Sofa Designed Futuristic Crafted
Instructions work in progress..
A generatived Designed Phone Stand
A Mandala maker for your artistic friend, your creative children or your own relaxation. The Mandala Designer works with square cut or folded A4 paper. You will need a print bed of at least 230mm x 230mm . Features a cut-out for easy…
Installation Instructions: Handle with Care This is my first custom design, created at my wife’s request for an iPhone 16 Pro car holder in her 2024 MG ZS EV. Please treat it gently. Assemble the Wedge and Support Dry-fit the Phone Holder…
Zebra Puzzle – 3D Print in Two Colors A small zebra puzzle designed for kids 🧩. Easy to assemble with a 0.25 mm tolerance , so the pieces fit snugly — not too loose, not too tight. 💡 Details: 2 colors using a single-extruder printer…
Modern cool designed desk org 3D-printed desk organizer
A stand for the ROG Ally, Steam Deck, Nintendo Switch or any other handheld consoles
I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…
A Generative Designed Headphone Stand
What is this? A 3-inch, 3-blade propeller for small drones. I designed it with AI (Claude), tested it in a computer simulation, printed it in tough resin, and flew it on my own drone. This is my own design, not a copy of a Gemfan file. I…
My daughter wanted me to print a keychain from a doodle she had made. So I said to her, 'Why don’t you try making it yourself with my help?' and this is what came out, later painted by her with acrylic colors. I’m posting this just to…
This model is made from the photo of the Designer 2 Badge. I like to keep a real world reminder, maybe others would like to do the same.
Eyeglass Holder - designed for SkillsUSA There is the whole part and separated versions Regardless the TPU would have to be printed separately
BRANCA R59 replaces the plastic body and idler arm of the SainSmart / Creality Ender 3 Pro single-gear extruder with four printed parts. It keeps your original motor, brass drive gear, 624U grooved idler, spring and screws. The only…
🍫 “Nutella‑Inspired” Breakfast Set – Minimal, Cute, and Designed for Everyday Use 🍫 This breakfast set is my personal reinterpretation of the Nutella-themed kit featured in the official prize contest. It’s not a faithful replica , but a…
![Colt 1911 Replica prop [IMPROVED AND UPDATED] (Designed from scratch)](https://media.printables.com/media/prints/682107/images/5359823_dcc53a32-e6f6-4a88-a468-582fdfd198ad_3ca5a631-9251-4d12-81fc-f5624b52233e/large_display_8123d645-d300-4929-945e-c84d2d032276.webp)
![Nemesis Modular Item Deck Holder designed for sleeved cards [ Nemesis, Lockdown, Retaliation ]](https://media.printables.com/media/prints/cfbaf411-f925-46d9-8626-2b883d143cde/images/10629845_fbd97aed-af38-4a68-9527-d456ab532607_bdcecc69-7a1c-4f77-b7c2-0ce0e43f6717/img_5203.jpeg)
