119 models
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Vampire The Masquerade: Vendetta - žeton prvního hráče.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Refillable cap for Dettol soap dispenser. All you have to do is drill a hole with a diameter of at least 20 mm into an empty original soap cartridge. Layer height: 0.15mm Supports: YES Material: It doesn't matter
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a basic refill cap for a Dettol NoTouch cartridge. It is designed to cover the entire top of the container. This way it is possible, to cut a hole in the entire bottom of the the refill cartridge, and the cutting does not need to…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Náhradní tokeny pro hru Vampire The Masquerade: Vendetta
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
Lo scudetto del Napoli con il numero tre è una splendida testimonianza del successo del club. Con i suoi colori azzurri e bianchi, questo scudetto si distingue per l'aggiunta dei colori del tricolore italiano , verde, bianco e rosso , che…
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. New Version V2!!! No support…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Vampire The Masquerade: Vendetta - žeton vlivu
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
🇮🇹 Italiano: Scudetto del Quarto Titolo – Tributo al Napoli (e non solo!) Questo progetto 3D celebra il prestigioso traguardo del quarto scudetto, con un design ispirato al Napoli ma pensato per rendere omaggio a tutte le squadre che…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
drřák na sprchový gel nebo mýdlo využito na dettol
Print approx. €2.73–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading “Strength Through unity” with a “V for Vendetta” V over strike. This is a 3 color, 3mm high sign. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm and…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
LLAVERO - KEYCHAIN - VENDETTA
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
A couple of 1x1 impassable terrain pieces for print for Thunder Road: Vendetta. You can get the full set of the rocks on Etsy https://www.etsy.com/listing/1525041488/thunder-road-vendetta-impassable-terrain or Cults3D…
An owl can help teach us about 3D printing and mechanical engineering. This model features a print-in-place mechanism that allows the bird’s head to rotate. Designed to be 3D printed without any support material, this model utilizes…
Opel Kadett C Coupe Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-4mm. Add some double-sided tape and…
Here it is! The shelf you've been looking for to secure your SAGROTAN no touch next to your washbasin. You have three options. What all options have in common is the dovetail wall bracket, which should be attached to the wall with either…
ecco qui il trofeo scudetto della serie a.
My friend showed me some pictures of things he wanted and I modelled these for him in Blender. The Gun turret main and sides need to be printed with supports. The Flamer Main also needs to be printed with supports. All the rest print…
Custom figure for Toadette Edit 12/30/23: Added Toadsworth and plan to upload a new version of Captain Toad aswell. Will update cover photo once finished
NOS Burr Series Interlocking puzzles by Gregory Benedetti The NOS Burr Series is a set of seven highly unusual interlocking puzzles by Gregory Benedetti. The goal of each puzzle is the same: assemble six pieces into the familiar shape of…
This 3D printable mask is a tribute to the legacy of rebellion, anonymity, and freedom. Inspired by the iconic V for Vendetta film and the Guy Fawkes persona, it captures the spirit of resistance in a beautifully stylized and highly…
This Box Organizer will fit ThunderRoad + Expansions up to December 2023. Corner Piece Files keep the road tiles from shifting around in the bottom of the box. Damage Tiles and Ongoing Damage Card Trays stack. Card tray has mag-locking…
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
This is an open-source vernier-style throttle for use with flight simulators! Build Documentation: ( https://create.arduino.cc/editor/vince_prints/26fd18d3-42d0-418f-9d31-a8dba8ad6354/preview ) Video Demo and Build Guide: CadetYoke:…
Ciao a tutti, ho creato questo stemma per celebrare lo scudetto del Napoli 2022/2023. Troverete lo stemma completo in formato step ed in formato 3mf che contiene al suo interno tutte le parti che lo compongono. Infine ci sono tutti gli…
Drill a hole in the top of your Dettol bottle and refill with whatever soap you like. Close the hole with this cap.
Opel Kadett (K38) This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
This is an extremely detailed scale model of the M/V Seabed Prince (IMO 9489651) , a real subsea research and support vessel, originally built in 2009 by Båtbygg AS, Norway. The vessel's design is specialized for exploration operations,…
Chibi V – The Silent Rebel
Iconic Movie Moments - V for Vendetta - The Standoff - 2005
This way you customize the last Dettol/Sagrotan refill unit you'd be buying, into a truly unlimited refill. Also, you reduce plastic waste in long term. You can then freely refill it with any of the liquid soaps that you would buy in bulk…
I create this token to put on top of any car when some of them is on fire. The game provides you a fire cardboard token to put on the table but nothing over the cars, so I give you this idea. You need to print 2 small flames and 1 big…
Designed for one of my granddaughters. I really don't know much about the character. It is designed so you can create a cloth insert or print it, if desired. To reduce the amount of support material, we created the balls on the crown as…
i made a hole in an original detol refill pack with a sharp knife. Then i glued the printed thread together with plastic glue.
Porta nella tua collezione un modello che punta tutto sulla qualità di stampa. Questa elegante statua elfica è progettata per esaltare ogni minimo dettaglio: dalle pieghe morbide del tessuto fino ai lineamenti delicati del volto, ogni…
The Sagrotan/Dettol soap dispensers are very simple contraptions inside. In effect, a single cog determines how much soap is pulled/pushed by the moving piston. Originally, the cog moving the piston has a pin that is offset by 6mm,…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Guy Fawkes Mask, in V for Vendetta. I wanted to make it with shadows, so I created this design, for easy filaments change. Use filaments change as follows: Layer Height = 0.2 mm 1- Start with White 2- Grey color change @ 2.2 mm 3- Black…
I wanted to mount Dettol soap dispenser on wall, so it won't take up space on sink and also won't stand in water. There are two versions - one for double sided table and one for screw mounting. Also great tip, if you are using this soap…
A Holder for the Sagrotan / Dettol No Touch Soap Dispenser. There are two models for mounting or placing: One for mounting (glue) / placing with a soap tray and one without a soap tray. One for screwing with a soap tray and one without a…
Diorama for Mini Dudette - Figurine not included Hi, Here's the diorama for the 5th Element. I've made this one to house Wekster's Leeloo but it will also work with PlaKit Leeloo and Korben Dallas. You can print all the parts with no…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
After trying out the gear published on thingiverse in the actual odometer, I've discovered that the little indentation that hooks to the number pin was not deep enough. The original has a deeper indentation compared to this model. So I…
These are 3 piece side skirts that include a minor mudguard up front and a rail on the bottom to help (in theory) keep air from escaping the sides of the car and help channel the air to the rear diffuser. I printed these 7 walls thick…
Mi hanno chiesto di trasformare il mio modello precedente in un portapenne… beh eccolo qua! Someone has asked me to transform my previous model in a penholder… here it is!
I've created this simple model to show on my desktop the support for the Naples football club. The “III” is to show my wish for the team to win its third “Scudetto” (First place in the Italian Premier League (the Campionato di Serie A).
Here's my take on the Kill Bill Poster with Wekster Mini "Dudette" - The Bride. The small letters are part of the wall and I made a filament swap so that I didnt have to paint them. They are too small to be painted or split from the wall.…
I remixed the awesome model by joe712 by adding a version without screw holes if you want to glue the dispenser to the wall with e.g. mirror tape. You have to print at least one version of the mount and the drip cup. Best part is still…
Printable hotend for the V400 using stock components and adding additional necessities for multi material printing. Integrated cutter, filament sensor, ADXL, Knomi2, Canbus, addressable LEDS, etc
Vergleichnummer OPEL Teilenummer 90197140 Teilenummer 90197139 Print in PETG or ASA
EN The model serves as a new way to add soap to Dettol liquid soap dispensers. The model was designed in such a way that it could be attached to the original container, the only thing that is necessary is to drill a hole in the upper part…
Wall mount for the electronic automatic Dettol soap dispensor. Use Tesa powerstrips to stick it to the wall Print Settings Printer: Original Prusa i3 Rafts: No Supports: No Resolution: 0,20 mm Infill: 20% Notes: Print at 102% might be a…
Since the COVID-19 outbreak I am unable to find a refill for my Dettol no-touch dispenser. So I created a refill thing for a Palmolive hand soap dispenser. I took the screw and pump part apart, and saved the part with the screw. Together…
NECESSARIO NOZZLE 0.25 per stampare la parte in giallo è possibile stampare con ugello 0.4 selezionando “blu pieno” al posto di "blu" e senza “giallo” Consiglio l'uso di Petg per una migliore finitura Remix del precedente remix con…
(PERSONAL PRINTS ONLY NOT FOR COMMERICAL USE OR SALES) Necklace/keychain simple easy print with flat black. Print in full color or paint afterwards. If you opt to paint after then make sure to clear coat before adding resin. Also highly…
Printed in ASA Prusa Artic White No support needet.
The four identical pieces of this interlocking puzzle make up a 5x5x3 cuboid. Gregory Benedetti is the designer of this puzzle and the plans are freely available on Puzzle Will Be Played. The pieces of this puzzle would impossible to…
Opel Ascona Kadett C Dachhimmelhülse Dachhimmelstange Endkappe/Hülse
Rear wing I designed for the Armma Vendetta. Prints in 3 pieces vertically and then super glue them together after printing. I printed mine in Petg. Category: R/C Vehicles
The original design from @Vince_Prints is for sliding pots with just two holes. That's a detail I discovered AFTER printing. So I had to design an adapter for the four hole potentiometers out there. Here you can find the original desing…
V For Vendetta Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
Un modèle de petite guimbarde parfaitement opérationnel, le fer est réalisé avec un clé six-pans de 6 mm, plus de renseignements dans la vidéo https://youtu.be/MOU88GhOGi0
Coster con logo di V per Vendetta, progettato e realizzato in due colori con AMS, stampare con la parte del logo rivolta verso il piatto. Una volta importato il file STL nello slicer colorare con il colore che si preferisce il logo e il…
INFLUENCE: 30 x 1 point 20 x 3 points
If you don't have the Carnage at Devils Run, you will need these spacers to compensate for the missing road tiles. Print four (4) of them.
Trollface Vendetta Mask 😈🎭 Born from the fusion of satire and iconic mask culture, the Trollface Vendetta Mask reimagines a legendary face through a unique and expressive design. Its oversized grin, exaggerated features, and mischievous…
La medaglia di San Benedetto è una medaglia sacramentale contenente simboli e scritte correlate con Benedetto da Norcia. Si fa risalire ad un vecchio manoscritti custodito presso l' abbazia benedettina di Sankt Michael , vicino Ratisbona.…
Protože chci používat dávkovač na mýdlo pro děti od Dettolu na jiné mýdlo, než to originální a nechtělo se mi stále páčit originální víčko, vytvořil jsem si šroubovací víčko které jsem přidělal skrz provrtanou původní nádržku dávkovače…
A few years back i traced this one from an old photo for a friend.
V FOR VENDETTA CHARACTER FOR FANS OF THE MOVIE
Cake topper per la prima comunione di Benedetta. Meglio se stampato a faccia sotto con il piatto texture. Layer 0,20
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Trollface Vendetta Mask V2 😈🎭 Born from the fusion of internet satire and iconic mask culture, the Trollface Vendetta Mask V2 takes the concept even further with a more cunning and provocative expression. This new version features a…
Hi ! Hand washing, which is essential in these difficult times and these automatic soap dispensers, Dettol or Sacrotan brand, are very practical... Another brand is Cillit Bang using the same internal pump. Have you ever noticed that…
This is a copy of a puzzle found on Puzzle Will Be Played. Its full English title is The Magic Flute - Queen of the Night as it is one of a series by Gregory Benedetti. http://puzzlewillbeplayed.com/DieZauberfloete/KoeniginDerNacht/ The…
La medaglia di San Benedetto è una medaglia sacramentale contenente simboli e scritte correlate con Benedetto da Norcia. Si fa risalire ad un vecchio manoscritto custodito presso l' abbazia benedettina di Sankt Michael , vicino Ratisbona.…
Cover for the DIN radio-slot of our Opel Kadett C Coupé GTE with the embossed GT/E lettering.
Keychain inspired by iconic Nissan RB26DETT engine (head gasket) Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on Dimensions: 80mm length, 3mm thickness
40mm fan mount for the Arrma Vendetta stock motor. Category: R/C Vehicles
suitable for dettol touchless soap dispenser
Print in PETG or ASA
Use with the @Vince_Prints_20779 CadetThrottle kit, print as with the knob.stl (use the knob from the kit for mixture, in red - this one for prop, in blue).
For washing hands we use liquid soap from a Dettol liquid soap dispenser but also a bar of soap. We encountered a few minor annoying things: Two kinds of soap take up more space Liquid soap dispenser sometimes drips soap onto the counter…
I really liked Vince_Prints' throttle design but I didn't want to spend the money on buttons and a key-switch as I don't really need them with my set-up. I've basically just cut the top half off. I was sort of forced to just trace over…
Update 05/04/23 - Made the fitment tighter and increased the distance between the holder and the backplate. Print Settings Printed at 15% infill with 2 walls. Printed on my Bambu Lab X1 Carbon with PLA.
Bucha do Encosto do Banco do Kadett
This is a remix of the GNK-200 (specifically manatee edition) designed to use a Kelly industries Dettlaff board. This board provides significantly more customization options than the original firmware. Main changes include holes for…
Replacement for P/N: ARRMA #ARA320604 nothing fancy done to it just an exact model to add color
Prevent Gear Oil Messes During Engine Pulls and Transmission Storage! This is a functional, heavy-duty plug designed specifically for the rear tailshaft (output shaft housing) of the classic GM/Opel 4-speed manual transmissions found in…
vendetta business card holder. Vendetta is a line of parts we carry at work, they are our own brand. i made out best fit logo so might as well do this one too
TBS Vendetta Front Bumper This Bumper protects your FPV camera. Its a spare part for the Teamblacksheep TBS Vendetta from TEAMBLACKSHEEP If you dont have a 3D printer, you can buy it here: http://bit.ly/1Yg3wT8 Category: R/C Vehicles
