103 models
DF65 Keel locking *Keeps the DF65 in place and transport..! Print 2 pcs.! Also nessesity with this:…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
This is really easy way to ventilate your DF65 after sailing. I dont ever open big hatch, so this is my option. I use 5v fans so its easy to feed just with USB powerbank.
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
For those stormy days when you want to place your boat on the side, not stand upright. Print two, other need to be mirrored. If its too hard to get to stand pipe. Just heat a little. But it must be tight, so it doesnt fall to bottom.,
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Designed to fit the Turin DF64 Gen 2 coffee grinder, this funnel replaces the bellows while still accommodating the wooden lid. This gives the grinder a cleaner aesthetic, reduces the height, and makes it easier to feed coffee beans.…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
V02 - Updated the angle for the screw hole to make it 90° with the angle of the grinder, and made the bracket a bit longer to compensate with the new angle. - A simple bracket for the DF64 grinder to grind the coffee beans directly into…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
I got a DF64 G-Iota, and i was not amused by the dial indicator of v4, it is good to have one but it should not scratch the surface. This little part is printed in 2 minutes and should prevent damage on the aluminium funnel.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Fan for ventilate DF65 hull after sailing. 4020 turbo fan 5v, USB powered. You can print it in two parts without supports and glue them together. Or just print in one and use some supports…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
I wanted to make a single dose funnel which is compatible with the DF64 bellows as I already have a DF64 next to the Eureka Mignon. I like printing in vase mode as it is fast and beautiful (no seems). The dimensions are chosen such that…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
A simple lid for the catch cup of the DF64V (or G-Iota VS) to use it as a blind shaker
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
This is the 7th iteration of my dosing cup holder for the DF64. It brings the dosing cup closer to the chute and there is no need for the silicone shoes anymore. You just put the dosing cup onto the holder and it stays there perfectly fine.
This slow bean feeder provides consistent, controlled feeding of coffee beans into DF64 or DF64V grinders. Features: Variable Speed via potentiometer USB Powered (5V) with optional LiPo battery support Direction Reverse with push button…
This grind size indicator includes a vernier scale that allows for precise sub-tick adjustment on a stock DF64. Each gap in the vernier represents 1/10th of a stock tick mark. Easily and repeatably adjust down to the 1 micron resolution!…
Prevents coffee grounds from flying everywhere when grinding my coffee beans.
Sometimes the feeder disk can jam, and sometimes it struggles to pick up the last bean. I've included the STEP files in case people want to make their own adjustments; please comment if you find a perfect solution! Edit 01/09/25: hopper…
Blind shaker / cup holder for the df64 coffee grinder. Simply attach with the original screw. If you like, you can glue a 10x1 mm round magnet at the bottom. The maximum diameter for the blind shaker is approx. 70 mm.
Wanted something for DF65 small battery opening. This will keep water away on calm days, when absolute storm, cover with tape to maximize waterproofnes. Prnt from some squishy TPU
My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…
Mount for holding the weber workshop's blind shaker on the DF64 Category: Kitchen & Dining
This is a mount designed to hold a Weber Workshops blind shaker for the DF64 Gen 1 and 2 coffee grinder. It has a slot for a small magnet in the base that centers the shaker directly below the grounds chute. In the photos of mine, I made…
Shaker mount for MHW-3Bomber Blind Shaker, fitting the DF64 (Gen 2). Fits the lid as well just under it.
A 20deg cup holder to reduce ground coffee from flying everywhere.
This remix split the part right in the middle, with 2mm holes to align with a bit of filament while gluing both parts together. With a bit of sanding and spray paint it, you can hardly see where the seams are. Category: Kitchen & Dining
Designed from scratch, used the original version as an inspiration. This is an improved version with better and tighter tollerance for the bellows and improved angle for less coffee beans retention.
Remix of CY's 3d tilted base to split the print into dovetailed sections so it fits on the smaller bed of my Prusa MK3S+. Dovetails have a 0.2mm gap which may be printer specific. This gap was a little too large on my Prusa MK3S+, but the…
The DF64 gen 2 wave washer is lose from the midle of the filter section cause the wave washer is too thin. this ring should be added under the wave washer. the modell is 1mm think, you should adjust the thickness by scaling the z based on…
This is a ballast bulb holder that will help support your boat on the factory stand. It will prevent the weight of the fin and bulb from damaging the boat hull by hanging in the breeze. It will also help the boat stay on the stand if it…
Hold 58mm portafilter on a DF64 Gen 2 grinder, may work on a Gen 1 but not sure. This was designed specifically off of my bottomless Normcore portafilter and Normcore dosing ring, but it may work with other combinations of different brand…
This is a model of the chute and declumper for the DF64P espresso grinder. You habe to “pre Bend” the declumper to have the optimum result like in one of the pictures. I recommend PETG with a layer height of 0.12 and 100% infill. I would…
These are two (chute and hopper) fitted vacuum attachments for DF64 grinders. This was tested on a "Turin Gen 2".
Funnel lid for DF64. It replaces the bellows and metal lid to allow for one hand operation and hot start. It includes an anti-popcorn disk to prevent beans from popping back out of the funnel. It needs support material on the outer edge,…
Breville 54mm portafilter holder for DF64 / DF64E / DF64P grinder. The height of the portafilter as measured from top of the portafilter ears to the bottom must match up otherwise the portafilter won't sit in place. I've this one…
May work for other 58mm gear but I haven't tested any
I got tired of dealing with the flimsy designs for the Blind Shaker Mount so I designed my own. Not only is this design stronger and more rigid, it also allows for the shaker to be held in two different ways. 1. With the lid on top held…
A magnetic dosing funnel for the DF64 grinder. It's a remix from Magnetic Espresso Dosing Funnel 58mm by Demokan adopted to fit DF64 grinder which required much finer outer wall. Two version are available: Compact, similar to original…
I printed with regular PLA / PLA+ and it's working perfectly, no supports or anything, though I would suggest at least 15% infill because the front seemed flimsy when lower. Difference is the small lip in front to prevent the shaker from…
i got tired of accidentally knocking my DF95 and DF65 boat switch to ON and finding my battery was dead on multiple occasions. To help prevent this, I designed a lockout to keep the switch in the OFF position. It is a simple print that…
Raises the edge of dosing cup to be closer to the grinder chute
I modified the original to work with the 10 degree base. Also moved the hole for the magnet to be embedded inside the base, since for me the original one in the bottom didn't do much. Might be because of the smaller magnet I used, since i…
It's my take on an grind indicator for DF64. It requires a zip tie to tighten.
Dosing cup holder for df64 gen 1 Inspired by @MP_899322 's design. Was designed to be used with metal cups Printed out laying down in ABS and PLA with supports 31 deg vs. grinder
This 3D-printed cockpit for the DF65 sailboat offers extra rigidity and better weight distribution by relocating the actuators and battery. It's a quick upgrade for improved durability and handling on the water.
Designed to print on the Mk3 without parting; it fits diagonally. Model has holes underneath for feet, of which there are two versions included. I didn't notice the need for feet until I tried to adjust the grinder on a hard counter. You…
Adapter for the Baratza Vario/Forte, to mount the DF-64 bellows to it. The bellows can be bought from ali, for example here . 3D printed TPU bellows always broke for me after a month, so I was looking at a more permanent solution. The…
Easy to print and install adapter to hold a portafilter on the Turin/df64 grinder! Pair with the funnel or the best results. Print in PLA with .2mm layer height Print with supports on overhangs/enforcers (I didn't put supports in the main…
DF54 has two holes, against 1 in DF64, I remixed the original model. The two holes were fixed a little below the one in the version for DF64 so that the dosing cup can get closer to the chute. Publishing here for someone to print and test…
This is a design I created for Flair Classic bottomless portafilter and DF64 coffee grinder. It serves as a stand accessory which you can put the portafilter on and grind your coffee in it. Since I'm new with 3d modeling and 3d printing,…
A simple model to make it a breeze to take off DF64 lid. Instructions: Print the model. Attach it to the lid using double-sided tape. Enjoy!
I didn't buy one with my df64v. modeled after a photo, so expect it to be incorrect. used as template. dont eat plastic.
This cupholder fits 58mm cups and probably others as well. It's slightly tilted and closer to the chute than the original one. It's designed so that you can just hang the cup off the top of it without needing to shove it in some slots.
RDT and brush mount for the df64 Can be slid over grinder body when base is removed. BE CAREFUL, edges of grinder are very sharp (I cut myself pretty bad while attempting to put this on my grinder) Designed to fit a small spray bottle for…
I'm still working on how I grind and transfer coffee and didn't want to replace the stock prongs on the grinder, so here is a drop in adapter. The inside diameter is 60mm.
I really loved Lee Taylor's design for the slow feeder. I am very grateful that he included the STEP files so I could open it in Fusion and check that the dimension fit the DF64V. They did, more or less. I haven't gotten the parts from…
As time goes by the bellows on my DF64 coffee grinder are becoming more and more easy to accidently knock off. This ring helps hold them on by gripping both the internal and external surface of the lower part of the bellows. There's even…
Chute for the DF64 Gen grinder. Designed with better roudings to reduce clogging and retention. There are no holes for electrodes of the plasma generator as I have had a lot of retention an ground beans sticking to the metal pins. In case…
A small lid to close the gap between the hole and the cup to avoid the grinded coffee to get spilled all over the place. Video: * https://www.tiktok.com/@bastelsaal/video/7429321950213721376 * https://www.instagram.com/p/DBgdxBIoPvK/ *…
important: 58mm holder is based on lelit58 2 ears portafilter. so, please check your portafilter dimensions, especially ears. feel free to contact me and I will publish .stl, especially for your parameters I don't like the stock holder,…
58mm dosing cup attachment for DF64 grinder Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 60 Filament: thingaverse PLA black Category: Kitchen & Dining
Ich bin auf die Probarista DF64E Digit umgestiegen, allerdings nervt mich das umherfliegende Espressopulver, das durch den Blasebalg umhergepustet wird. Mein bereits vorhandener Trichter erfüllt zwar seinen normalen Zweck, fängt dieses…
Gives the bellow a snug fit so it wont fall off when removing the lid. Grind size pointer needs to be screwed on top.
The sleeves that came with the machine degraded rather quickly (ripped apart). Designed these sleeves based on the original and they fit perfectly on the machine. I don't know how long this will last in the long term, but for the time…
The dosing cup dropped a few times for me. So I decided to create a simple ring which adds some grip. Its printed upside down. It has a 1% taper angle. I printed it in semi-soft TPU from extrudr. The G-Code File is for this material.
This ramp is for dosing cup, so that the adapter can be left permanently in the grinder.
Fire a broadside at your competition with this mini turret gun hatch cover for your dragon force 65 rc sailboat.
Does not require supports. I recommend setting top layer as concentric. Also 3-4 walls to keep the ring more ridgid
This is for a GE dishwasher model number gdf630psm3ss silverware basket model number WD28X24476 AFTER A TEST RUN PETG IS STILL TOO SOFT AT THE DISHWASHER TEMPS. NEED TO USE A HIGH TEMP MATERIAL WITH HEAT RESISTANCE. I WILL BE PRINTING IN…
important: 58mm holder is based on lelit58 2 ears portafilter. so, please check your portafilter dimensions, especially ears. feel free to contact me, and I will publish .stl, especially for your parameters I tried to develop a holder…
Holder for 120ml glass jars (58mm/R3 lid), also used on hand grinders. Glass jars are cheap and easily available and can be used in the dishwasher. Fits the portafilter holder of DF grinders (tested on DF64 Gen2). Supports on build plate…
I had an Ikape 54mm dosing cup to use with a Breville Bambino and a DF64P I had lost the original plastic catch cup too. I made this adapter to slot into the portafilter forks of the DF64 and hold the 54mm catch cup. I printed it on my…
Grind from your DF64V directly into your Lelit portafilter. The hole on the front of the model where the handle rests is for a 6mm diameter x 2mm tall silicone "dot" (like what you put under chair feet, but much smaller). This protects…
RC transmitter phone attachment bracket This bracket is for the original transmitter of the Dragon Force 65 RC sailboat. It has a hanging eye for hands free hanging from your neck. It has a camera attachment, fitting a 1/4" 20 UNC bolt.…
I never really liked the original lid on my DF64, it's not a great fit and seems overly heavy for what it is. This got thrown together one day when I was bored and I kept tweaking it till it was a nice snug fit, and generally it fits…
3D-printed replacement cap for the DragonForce 65 RC sailboat's battery compartment. It replaces the traditional adhesive patch or original cap, offering a precise and quick closure. It includes a convenient central loop for attaching a…
This Lelit Bianca portafilter holder has been modified for the feet of the DF64V grinder so that you can grind directly into a portafilter rather than a catch cup. The model has also been modified to work with the Umikot and a funnel. V2…
Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall. with a 1mm thick support ring near the top). The stainless-steel cup, besides looking nicer than the clear plastic one,…
Imprimé en Prusament TPU 95A Natural
I was using a N20 3v 15rpm motor and the base disc was a little slow for it. For my motor and DF64, 8-noches disc are suitable. If you are using a motor with a different rpm, then print the required disk from the models provided.
Remixed to fit the dosing cup that comes with the DF64 grinder.
Press fit ring that attaches to the bottom part of the Slow Feeder (By Lee Taylor) and sets on the anti-popcorn ring of the df84v. Anti-popcorn metal plate can be removed to allow the beans to drop directly. The ring is made with small…
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
This shall protect the base of the grinder when knocking out the puck. Printed in TPU upside down.
It's just a funnel for a stock cup You may need it if you are using some custom holder The model is included so feel free to remix it and adapt it to your needs
Using the original models, I noticed that the motor wasn't securely fastened in place. I modified the original clump model and added a spacer to hold the motor in place. I used the motor from this link . Your motor may be different, and…
Designed to fit the DF64v coffee grinder (sold under brands like Miicoffee and Turin), this piece attaches by friction to the wooden lid, removing the need for bellows for a lower profile and cleaner look. You can still perform the…
DF64 Blind Shaker Mount - Sloped with Hook. Designed with a forward slope to prevent coffee grounds from accumulating around the base and screw hole. The integrated hook secures the blind shaker in place, preventing it from slipping or…
Intended to poorly simulate a blind shaker as cheaply as possible.
Replacement base for the DF64E Coffee Mill. Intended to reduce fines, holdover, and overall messiness of the grind.
I made this to neatly hold my coffee accessories off the benchtop, while keeping them in easy reach. The model comes in parts, designed to be glued together, so that it prints without the need of supports.
Print with TPU. Print slow with some cooling as the top half is quite thin and may warp. To place it, seat the bellow in the ring first then put the ring over the main body of the grinder's top and push down.
Simple Suzuki / Johnson outboard hood latch. Should fit all Suzuki DF4, DF5 and DF6 four stroke outboard motors from 2002 onwards and Johnson four stroke outboards 4, 5 and 6 hp from 2003 to 2007 (Not completely sure about this) OEM…
I created a dosing cone to go on top of the bellows to improve my workflow. You can still puff with either the palm of your hand, or the lid. The lid handle seems to hold tight, but I used some superglue to fix it permanently. Recommend…
As the flanges on the La San Marco Practi portafilters are 3 instead of the common 2 and also slightly thicker I made a modified holder for the grinder. The normal dosing cup and silicon sleeves still fits, and no extra hardware is…
Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
The sleeves that came with the machine degraded rather quickly (ripped apart). Designed these sleeves based on the original and they fit perfectly on the machine. I don't know how long this will last in the long term, but for the time…
