49 models
Have fun with this new discrete (as in discontinuous) fidget ring! If you like the standard fidget ring , the dual fidget ring , the uber fidget ring , but would like to have something more functional, this is it. The internal structure…
This is the top 100% recommended for everyone to use on their 3D printer it only takes a couple minutes to have it perfectly and completely locked in very nicely and it is a very handy 3D printer part. An absolute go to for any Ender3…
Modular connectivity with all Milwaukee PACKOUT components such as the organizer cup, pliers rack, hooks, etc
Have fun with this Mark II discrete (as in discontinuous) fidget ring! If you like the standard fidget ring , the dual fidget ring , but would like to have something more functional, this is it. The internal structure of the ring makes it…
Upgrade version for ender 3 s1 Pro
The new Ver 2 can be found here: Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not…
If you're anything like me you have more than 1 SD card laying around on your desk. This Modular and Discrete SD/MicroSD card Case allows you to neatly package away your cards, leaving them neatly for when you need them next Super easy to…
Replacement clamp for SRAM Eagle AXS Controller. Out of stock EVERYWHERE when I needed one. Clamp bolt is replaced with an M4x10 into an M4 Heatset insert.
This container allows to have two tampons discretely on reserve on your desk or in your briefcase.
Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not compatible with the new EU…
These are tiny cabinet door pulls when the situation calls for something small and discreet. There are two models, an asymmetric version for use with a matching pair, or a symmetrical one which is better suited as a single handle. I…
This is a remote control holder that mounts to the underside of a desk or table. It has honeycomb sides to save on some filament. It mounts with the 4 tabs on the top of the model. The 4 holes directly below the tabs are to allows access…
Printed at 100% infill with PLA for max strength since the hook is quite thin for minimal foot print when not in use, prints in about an hour. Helmet in picture is a large MET Parachute MCR (880g) and Backbone googles (180g ish)
A discrete rain collector for 90 mm downpipe with a gardena hose connector. The main design goal of this rain water collector is to be discrete. The visible part is only 45 mm tall. Most of the collector is hidden inside of the downpipe.…
Welcome ! Discover the discrete dog tag, without a wandering pendant. Introduces the simply in your dog's collar! Print Settings Printer: Ender 3V2 Neo Supports: No Resolution: 0.2 Infill: 10% Now you can let your dog travel (but not too…
Can hold soccer, basket and probably many other types of balls.
This design has 2 parts. The body The slider The slider can screw into the bottom of your desk using 4x #12x3/4" screws. The body slides in from the back. I've included 3 sizes: Small (75mm). The pictures are of this size. It can fit a…
Helps make the holder more discreet, and potentially keeps out water and dust. Models: Narcan Holder Discrete: Removes large cutout wholes from front and back of original. Short Lid: Covers only the top cutouts. Tall Lid: Covers the large…
Faire attention en retirant les supports sur les parties fragiles. Avec son air sérieux et sa silhouette profilée, ce petit ptérodactyle est prêt à prendre son envol vers ta collection ! Design tout en rondeurs et en douceur, parfait pour…
This is based on the plot Z=X*Y (known as a hyperbolic paraboloid or a saddle point) but instead of being a continuous surface, I've discretized it so that it is formed from a collection of varying height square prisms. Aside from looking…
Inspired in other models in printables I made from scratch a small and discrete magnetic fidget that is modeled for 3.18mm tall x 4.77mm diameter magnets. The magnets have a tight fit due to the different magnet positions, you can place…
este portalápices es perfecto para tu oficina o escritorio. es discreto pero útil. This pencil holder is perfect for your office or desk. It is discreet but useful.
You will likely need to sand the components after printing for them to turn easily. In this video I show you how it can be assembled: https://youtube.com/shorts/K4KT0th-kwg Happy printing :)
A hyperbolic paraboloid is a curved plane that matches the appearance of a pringles-style potato chip. Use the Scad file to generate a hyperbolic paraboloid sculpture with different parameters and levels of discreteness, or use the…
This is the original case that I designed for the “main” PCB for the BrewPi-ESP project: https://github.com/thorrak/brewpi-esp8266 As the years have gone on, I have designed multiple variations of the PCB – this case is for the original…
A unique 3D printable creation — this Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
A simple ball fidget. This is not unique, but this is version was created from scratch. STL file should be split so the main body can be printed flat. Note: One of my photos also has a version printed at 80% and 60%.
This is a rugged and discrete AirTag case. Great for putting into your luggage, in a backpack, under a car seat, etc. I used a cable style keyring such as these https://a.co/d/afOPQ5t. I found that the 6.5" (165mm) cables work the best.…
Découvrez le modèle 3D du Stickman Discret, une représentation minimaliste et intrigante d'un personnage anonyme. Ce modèle ludique et élégant est conçu pour être imprimé en 3D, ajoutant une touche de mystère à vos créations. Le Stickman…
I designed this to have a discrete way to carry multiple thumb-drives on me in my EDC bag. It comes in two configurations, one that fits 3 thumb drives and another that fits 4. The specific model of thumb drive I prefer doesn't quite fit…
A slim and solid additional buckle to help your belt keep tight. You can use it with single or double pass (see pictures) All edges chamfered so you dont scratch your precious cloth. Print in the material and color that fit best to you…
You might need to sand the components slightly to ensure that they fit properely In this video I show you how it can be assembled: https://youtube.com/shorts/xxhEnu-it5w
These can work with any 18 gauge nail and a 1/4in or 6.75mm hose. I designed these to work with the Home Master Reverse Osmosis Refrigerator kit to go under the cabinets along the floor board.
This is based on the plot Z= - (X^2) - (Y^2) (known as a paraboloid) but instead of being a continuous surface, I've discretized it so that it is formed from a collection of varying height square prisms. Three STL files included:…
Découvrez le modèle 3D du Grand Stickman Discret en trois parties, une représentation intrigante et mystérieuse d'un personnage emblématique en taille réelle. Ce modèle ludique et minimaliste est conçu pour être imprimé en 3D en trois…
Découvrez le modèle 3D du Grand Stickman Discret en trois parties avec le branding Kick1Fire, une représentation unique et captivante d'un personnage emblématique en taille réelle. Ce modèle ludique et minimaliste, en collaboration avec…
This is the latest version of the original case that I designed for the “main” PCB for the BrewPi-ESP project: https://github.com/thorrak/brewpi-esp8266 As the years have gone on, I have designed multiple variations of the PCB – this case…
Inspired from other projects that were not printable, I decided to rebuild it from scratch. The goal was to make 2 identical pieces that fit perfectly together. I also provided a system to make them “clamp” together. These have been…
Requires double sided tape. I was sick of a loose wire always hanging out on my desk when I didn't need to charge my mouse. With this cable holder, the cable is held within reach but without taking up and desk space. It is a clean, cheap…
I created a key fob for my OER discrete math text, Applied Discrete Structures. The 3D text was created with an Oculus VR headset and the Gravity Sketch app. The logo was created with Mathematica.
resized the holes for 4.2mm M3 heatset inserts, has the original tabs and alternate tabs, most pc cases have different mounts so you will probably have to make your own
The original IKEA feet for their LAMPLIG trivet are large and unsightly. They also don't provide any impact protection from the metal ends accidentally being knocked sideways into our glass induction hob, which has resulted in chips in…
This is a stand I whipped up for the Discrete 555 Timer kit. The center part needs M5 inserts, You'll also need 2 M5x10mm. Discrete 555 Timer Kit: https://www.solarbotics.com/product/13140/
This is a stand I whipped up for the Discrete 555 Timer kit. The center part needs M5 inserts, You'll also need 2 M5x10mm. Discrete 555 Timer Kit: https://www.solarbotics.com/product/13140/
A unique 3D printable creation — this Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
This is based on the plot Z= - (X^2) - (Y^2) (known as a paraboloid) but instead of being a continuous surface, I've discretized it so that it is formed from a collection of varying height square prisms. Three STL files included:…
This is based on the plot Z=X*Y (known as a hyperbolic paraboloid or a saddle point) but instead of being a continuous surface, I've discretized it so that it is formed from a collection of varying height square prisms. Aside from looking…
